Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takano, Kazuya; Oki, Shigeo; Ozawa, Takayuki; Yamano, Hidemasa; Kubo, Shigenobu; Ogura, Masashi*; Yamada, Yumi*; Koyama, Kazuya*; Kurita, Koichi*; Costes, L.*; et al.
EPJ Nuclear Sciences & Technologies (Internet), 8, p.35_1 - 35_9, 2022/12
The France and Japan teams have carried out collaborative works to have common technical views regarding a sodium-cooled fast reactor concept. Japan has studied the feasibility of an enhanced high burnup low-void effect (CFV) core and fuel using oxide dispersion-strengthened steel cladding in ASTRID 600. Regarding passive shutdown capabilities, Japan team has performed a preliminary numerical analysis for ASTRID 600 using a complementary safety device, called a self-actuated shutdown system (SASS), one of the safety approaches of Japan. The mitigation measures of ASTRID 600 against a severe accident, such as a core catcher, molten corium discharge assembly, and the sodium void reactivity features of the CFV core, are promising to achieve in-vessel retention for both countries. The common design concept based on ASTRID 600 is feasible to demonstrate the SFR core and safety technologies for both countries.
Kano, Koichi*; Hagiwara, Satoshi*; Igarashi, Takahiro; Otani, Minoru*
Electrochimica Acta, 377, p.138121_1 - 138121_10, 2021/05
Times Cited Count：17 Percentile：71.29(Electrochemistry)We investigated the free corrosion potential at an interface between an Al electrode and an aqueous NaCl solution under acidic conditions via density functional theory combined with the effective screening medium and reference interaction site model (ESM-RISM). The electrode potentials for the anodic and cathodic corrosion reactions were obtained from the grand potential profile as a function of the electron chemical potential at the interface. Thereafter, we determined the free corrosion potential using the Tafel extrapolation method. The results of the free corrosion potential were consistent with previous experimental data. By controlling the pH, we determined the pH dependence of the free corrosion potential, and the results agreed well with the experimental results. Our results indicated that the ESM-RISM method duly described the environmental effect of an acidic solution and precisely determined the free corrosion potential.
Xe ions on proton, deuteron, and carbon targetsSun, X. H.*; Wang, H.*; Otsu, Hideaki*; Sakurai, Hiroyoshi*; Ahn, D. S.*; Aikawa, Masayuki*; Fukuda, Naoki*; Isobe, Tadaaki*; Kawakami, Shunsuke*; Koyama, Shumpei*; et al.
Physical Review C, 101(6), p.064623_1 - 064623_12, 2020/06
Times Cited Count：5 Percentile：52.72(Physics, Nuclear)The spallation and fragmentation reactions of Xe induced by proton, deuteron and carbon at 168 MeV/nucleon were studied at RIKEN Radioactive Isotope Beam Factory via the inverse kinematics technique. The cross sections of the lighter products are larger in the carbon-induced reactions due to the higher total kinetic energy of carbon. The energy dependence was investigated by comparing the newly obtained data with previous results obtained at higher reaction energies. The experimental data were compared with the results of SPACS, EPAX, PHITS and DEURACS calculations. These data serve as benchmarks for the model calculations.
Ueta, Shohei; Mizuta, Naoki; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; Honda, Masaki*; Saiki, Yohei*; Takahashi, Masashi*; Ohira, Koichi*; Nakano, Masaaki*; et al.
Nuclear Engineering and Design, 357, p.110419_1 - 110419_10, 2020/02
Times Cited Count：1 Percentile：12.16(Nuclear Science & Technology)The concept of a plutonium (Pu) burner HTGR is proposed to incarnate highly-effective Pu utilization by its inherent safety features. The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO
) and yttria stabilized zirconia (YSZ) as an inert matrix. This paper presents feasibility study of Pu burner HTGR and R&D on the 3S-TRISO fuel.
Wang, H.*; Otsu, Hideaki*; Chiga, Nobuyuki*; Kawase, Shoichiro*; Takeuchi, Satoshi*; Sumikama, Toshiyuki*; Koyama, Shumpei*; Sakurai, Hiroyoshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; et al.
Communications Physics (Internet), 2(1), p.78_1 - 78_6, 2019/07
Times Cited Count：8 Percentile：56.2(Physics, Multidisciplinary)Searching for effective pathways for the production of proton- and neutron-rich isotopes through an optimal combination of reaction mechanism and energy is one of the main driving forces behind experimental and theoretical nuclear reaction studies as well as for practical applications in nuclear transmutation of radioactive waste. We report on a study on incomplete fusion induced by deuteron, which contains one proton and one neutron with a weak binding energy and is easily broken up. This reaction study was achieved by measuring directly the cross sections for both proton and deuteron for 
Pd at 50 MeV/u via inverse kinematics technique. The results provide direct experimental evidence for the onset of a cross-section enhancement at high energy, indicating the potential of incomplete fusion induced by loosely-bound nuclei for creating proton-rich isotopes and nuclear transmutation of radioactive waste.
Ajimura, Shuhei*; Bezerra, T. J. C.*; Chauveau, E.*; Enomoto, T.*; Furuta, Hisataka*; Harada, Masahide; Hasegawa, Shoichi; Hiraiwa, T.*; Igarashi, Yoichi*; Iwai, Eito*; et al.
Progress of Theoretical and Experimental Physics (Internet), 2015(6), p.063C01_1 - 063C01_19, 2015/06
Times Cited Count：6 Percentile：45.25(Physics, Multidisciplinary)The J-PARC E56 experiment aims to search for sterile neutrinos at the J-PARC Materials and Life Science Experimental Facility (MLF). In order to examine the feasibility of the experiment, we measured the background rates of different detector candidate sites, which are located at the third floor of the MLF, using a detector consisting of plastic scintillators with a fiducial mass of 500 kg. The gammas and neutrons induced by the beam as well as the backgrounds from the cosmic rays were measured, and the results are described in this article.
Fe
O
and zero-thermal expansion compositeNabetani, Koichiro*; Muramatsu, Yuya*; Oka, Kengo*; Nakano, Kiho*; Hojo, Hajime*; Mizumaki, Masaichiro*; Agui, Akane; Higo, Yuji*; Hayashi, Naoaki*; Takano, Mikio*; et al.
Applied Physics Letters, 106(6), p.061912_1 - 061912_5, 2015/02
Times Cited Count：60 Percentile：89.12(Physics, Applied)Negative thermal expansion (NTE) of BiNi
Fe
O
is investigated by dilatometric curves, synchrotron X-ray diffraction, and X-ray absorption spectroscopy. All samples (x=0.05-0.15) shows large NTE with the coefficient of linear thermal expansion which induced by charge transfer between Bi
and Ni
in the controlled temperature range near room temperature. Compared with BiLnNiO (Ln: rare-earth elements), the thermal hysteresis that causes a problem for practical application is suppressed because random distribution of Fe in the Ni site changes the first order transition to second order-like transition.
Sakai, Toru; Nakano, Hiroki*; Okunishi, Koichi*
Journal of Physics; Conference Series, 568(4), p.042024_1 - 042024_5, 2014/00
Times Cited Count：3 Percentile：76.6(Physics, Applied)The spin nanotube is investigated by the numerical diagonalization and the level spectroscopy analysis. As a result, the quantum phase transition between the spin gap and gapless phases was revealed to occur with respect to the ratio of the rung and leg exchange interactions.
-ray cameraTakeda, Shinichiro*; Ichinohe, Yuto*; Hagino, Koichi*; Odaka, Hirokazu*; Yuasa, Takayuki*; Ishikawa, Shinnosuke*; Fukuyama, Taro*; Saito, Shinya*; Sato, Tamotsu*; Sato, Goro*; et al.
Physics Procedia, 37, p.859 - 866, 2012/10
Times Cited Count：22 Percentile：98.43(Physics, Applied)By using new Compton camera consisting of silicon double-sided strip detector (Si-DSD) and CdTe-DSD developed for the ASTRO-H mission, an experiment was conducted to study its feasibility for advanced hotspot monitoring. In addition to hotspot imaging already provided by commercial imaging systems, the identification of the variety of radioisotopes is realized thanks to the good energy resolution given by the semiconductor detectors. Three radioisotopes of 
Ba (356 keV), 
Na (511 keV) and 
Cs (662 keV) were individually imaged by applying event selection in the energy window and the -ray images was correctly overlapped by an optical picture. The detection efficiency of 1.68
10
(effective area: 1.710 cm
) and angular resolution of 3.8
were obtained by stacking five detector modules for 662 keV -ray. The higher detection efficiency required in a specific use can be achieved by stacking more detector modules.
Musha, Atsushi*; Yoshida, Yukari*; Takahashi, Takeo*; Ando, Koichi*; Funayama, Tomoo; Kobayashi, Yasuhiko; Negishi, Akihide*; Yokoo, Satoshi*; Nakano, Takashi*
Journal of Radiation Research, 53(4), p.545 - 550, 2012/07
Times Cited Count：9 Percentile：45.05(Biology)Iguchi, Masahide; Chida, Yutaka; Takano, Katsutoshi; Kawano, Katsumi; Saito, Toru; Nakajima, Hideo; Koizumi, Norikiyo; Minemura, Toshiyuki*; Ogata, Hiroshige*; Ogawa, Tsuyoshi*; et al.
IEEE Transactions on Applied Superconductivity, 22(3), p.4203305_1 - 4203305_5, 2012/06
Times Cited Count：9 Percentile：47.58(Engineering, Electrical & Electronic)Japan Atomic Energy Agency (JAEA) has responsibility to procure 19 structures for ITER toroidal field (TF) coils as in-kind components. JAEA plans to use materials specified in the material section of "Codes for Fusion Facilities; Rules on Superconducting Magnet Structure (2008)" issued by the Japan Society of Mechanical Engineers (JSME) in 2008. Large forged products were produced and their mechanical properties at 4K were evaluated. In addition, the following activities have been performed; (1) to optimize the design of each weld type identified in the manufacturing sequence, (2) to qualify typical welding procedure including repair, (3) to establish welding techniques other than narrow gap TIG welding with FMYJJ1, (4) to demonstrate the manufacturing procedures through manufacture of 1-m mockups and full-scale segments of TFC structure. This paper describes the results of material qualification and industrialization activities of manufacturing processes of ITER TFC structure.
Matsui, Kunihiro; Koizumi, Norikiyo; Hemmi, Tsutomu; Takano, Katsutoshi; Nakajima, Hideo; Kimura, Satoshi*; Iijima, Ami*; Sakai, Masahiro*; Osemochi, Koichi*; Shimada, Mamoru*
IEEE Transactions on Applied Superconductivity, 22(3), p.4203005_1 - 4203005_5, 2012/06
Times Cited Count：6 Percentile：37.82(Engineering, Electrical & Electronic)JAEA is responsible for the procurement of 9 toroidal field (TF) coils as Japanese Domestic Agency. JAEA had started several trials to successfully develop technologies for the TF coil manufacture since March 2009, and performed one-third scale trials aiming at qualifying and optimizing the procedures of the TF coil fabrication. The fabricated double pancakes (DPs) were successfully put into the profile with tolerances from zero to 1.5 mm. These tolerances correspond to 0.06% accuracy in the conductor length. The geometry of the DP was changed after heat treatment. Heat treatment procedure to avoid such deformation should be developed or the change of winding geometry should be taken into account in the fabrication of the TF coils. The one-third scale DP was successfully impregnated. Although exothermal reaction is given to take place during curing in the blended resin, we successfully cured the one-third scale DP.
Koizumi, Norikiyo; Matsui, Kunihiro; Hemmi, Tsutomu; Takano, Katsutoshi; Chida, Yutaka; Iguchi, Masahide; Nakajima, Hideo; Shimada, Mamoru*; Osemochi, Koichi*; Makino, Yoshinobu*; et al.
IEEE Transactions on Applied Superconductivity, 22(3), p.4200404_1 - 4200404_4, 2012/06
Times Cited Count：9 Percentile：47.58(Engineering, Electrical & Electronic)JAEA started sub- and full-scale trials to qualify and optimize manufacturing procedure of ITER TF coil from March, 2009. As major outcome of these trials, automatic winding system with accuracy in conductor length measurement of 0.01% has been established and the elongation of the conductor length due to heat treatment was measured to be 0.06%. To confirm validity of these outcomes, the authors carried out winding of a one-third scale dummy double pancake (DP), followed by its insulation and impregnation trial, and, in addition, heat treatment of one-third scale DP with real a TF conductor. The details about these trials are described in the other paper. The authors also performed trial manufacture of full scale RP and CPs for dummy double pancake, which will be made in near future. The full scale RP is manufactured by machining 10 segments in parallel to shorten machining duration and joining each segment by welding. In our trial manufacture of the full scale RP, hot-rolled SS316LN plates are machined to a final dimension, namely without additional material, and these segments are laser-welded. From these trials, manufacturing procedure of a thick hot-roll SS316LN plate is qualified and machining procedure is established, while more optimization may be necessary to achieve the required schedule and cost.
Zhang, Z.*; Nishimura, Hiroaki*; Namimoto, Takura*; Fujioka, Shinsuke*; Arikawa, Yasunobu*; Nishikino, Masaharu; Kawachi, Tetsuya; Sagisaka, Akito; Hosoda, Hirokazu*; Orimo, Satoshi; et al.
Review of Scientific Instruments, 83(5), p.053502_1 - 053502_5, 2012/05
Times Cited Count：18 Percentile：62.3(Instruments & Instrumentation)X-ray line spectra ranging from 17 to 77 keV were quantitatively measured with a Laue spectrometer, composed of a cylindrically curved crystal and a detector. Either a visible CCD detector coupled with a CsI phosphor screen or an imaging plate can be chosen, depending on the signal intensities and exposure times. The absolute sensitivity of the spectrometer system was calibrated using pre-characterized laser-produced X-ray sources and radioisotopes. The integrated reflectivity for the crystal is in good agreement with predictions by an open code for X-ray diffraction. The energy transfer efficiency from incident laser beams to hot electrons, as the energy transfer agency for specific X-ray line emissions, is derived as a consequence of this work.
Takano, Katsutoshi; Koizumi, Norikiyo; Shimizu, Tatsuya; Nakajima, Hideo; Esaki, Koichi*; Nagamoto, Yoshifumi*; Makino, Yoshinobu*
Teion Kogaku, 47(3), p.178 - 185, 2012/03
In the ITER TF coil, the tight tolerances of 1 mm in flatness and a few mm in profile are required in manufacturing a radial plate (RP), although the height and width of an RP are 13 m and 9 m, respectively. In addition, since cover plates (CP) should be fitted to a groove of an RP with tolerance of 0.5 mm, the tight tolerances are also required to a CP. Thus, we can conclude that the manufacturing procedure of the RP and CP has been demonstrated.
Chida, Yutaka; Iguchi, Masahide; Takano, Katsutoshi; Nakajima, Hideo; Osemochi, Koichi*; Niimi, Kenichiro*; Tokai, Daisuke*; Gallix, R.*
Fusion Engineering and Design, 86(12), p.2900 - 2903, 2011/12
Times Cited Count：10 Percentile：60.88(Nuclear Science & Technology)TF coil structures, which support large electromagnetic force generated in TF coils under the cryogenic temperature (about 4K), are the mega welding structures composed of coil case and support structures made of high strength and high toughness stainless steel. JAEA started the study on welding trials for heavy thickness materials since 2008 and is planning of full scale mock-up model fabrication for main sub-components (1 set of inboard side and 1set of outboard side) in 2010 in order to investigate the technical issues for manufacturing of TF coil structures. This paper introduces the results on welding trials and status of full scale mock-up model fabrication to confirm the validity of welding technology and manufacturing design before fabricating actual products.
Matsui, Kunihiro; Koizumi, Norikiyo; Hemmi, Tsutomu; Takano, Katsutoshi; Nakajima, Hideo; Osemochi, Koichi*; Savary, F.*
Fusion Engineering and Design, 86(6-8), p.1531 - 1536, 2011/10
Times Cited Count：2 Percentile：18.29(Nuclear Science & Technology)The magnet system for ITER comprises 18 Toroidal Field (TF) Coils using NbSn cable-in-conduit superconductor, which operate at 4.5 K in supercritical helium. Japan Atomic Energy Agency (JAEA) is responsible for the procurement of 9 TF coils as Japanese Domestic Agency (JADA). Before launching the procurement of these coils, reduced and full-scale trials will be performed to determine and optimize the manufacturing process of a TF coil. During the manufacture of the TF coil, heat-treated superconducting cable-in-conduit conductor, whose length may vary during heat treatment, shall be inserted in the grooves of the radial plate (RP), which is part of the mechanical structure supporting the large electromagnetic forces that are of the order of 800 kN/m. The RP also enhance reliability of the electrical insulation that will be tested up to 19 kV DC and 2.5 kV AC for the winding pack to ground. Very accurate tolerances, of the order of 0.01% on the length of the RP grooves and of the wound conductor, are required to enable the insertion of the conductor. Therefore, the development of suitable manufacturing techniques for the RP and for the winding operation is essential to achieve this requirement. JAEA has contracted companies for fabrication trials of a full-scale RP and winding trials of a one-third scale double pancake to verify feasibility of the required tolerances from an industrial view point. Prior to these trials, JAEA developed a preliminary manufacturing plan and then, industry will carry out small-scale trials to demonstrate applicability of the preliminary manufacturing plan before making the reduced and full-scale trials. The small scale trials will include the cover plate welding with the laser welding, the impregnation using the acryl and metal models, and, the mechanical test and the trail bending of the TF conductor. The results of the small-scale trials and progress on the reduced and full-scale trials are presented in this paper.
Sato, Takahiro*; Iwasaki, Atsushi*; Ishibashi, Kazuki*; Okino, Tomoya*; Yamanouchi, Kaoru*; Adachi, Junichi*; Yagishita, Akira*; Yazawa, Hiroki*; Kannari, Fumihiko*; Aoyama, Makoto; et al.
Europhysics News, 42(5), P. 10, 2011/09
The resonant and non-resonant two-photon single ionization processes of He were investigated using intense free electron laser light in the extreme ultraviolet (XUV) region (53.4-61.4 nm) covering the 1s-2p and 1s-3p resonant transitions of He. On the basis of the dependences of the yield of He
on the XUV light-field intensity at 53.4, 58.4, 56.0 and 61.4 nm, the absolute values of the two-photon ionization cross sections of He at the four different wavelengths and their dependence on the light-field intensity were determined for the first time.
Sato, Takahiro*; Iwasaki, Atsushi*; Ishibashi, Kazuki*; Okino, Tomoya*; Yamanouchi, Kaoru*; Adachi, Junichi*; Yagishita, Akira*; Yazawa, Hiroki*; Kannari, Fumihiko*; Aoyama, Makoto; et al.
Journal of Physics B; Atomic, Molecular and Optical Physics, 44(16), p.161001_1 - 161001_5, 2011/08
Times Cited Count：36 Percentile：82.78(Optics)The resonant and non-resonant two-photon single ionization processes of He were investigated using intense free electron laser light in the extreme ultraviolet (XUV) region (53.4-61.4 nm) covering the 1s-2p and 1s-3p resonant transitions of He. On the basis of the dependences of the yield of He on the XUV light-field intensity at 53.4, 58.4, 56.0 and 61.4 nm, the absolute values of the two-photon ionization cross sections of He at the four different wavelengths and their dependence on the light-field intensity were determined for the first time.
collisions at 
= 200 and 62.4 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06
Times Cited Count：184 Percentile：99.44(Physics, Nuclear)Transverse momentum distributions and yields for 
, and 
in collisions at = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different collisions. We also present the scaling properties such as 
and 
scaling and discuss the mechanism of the particle production in collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.
