Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kato, Shinya; Doda, Norihiro; Yokoyama, Kenji; Tanaka, Masaaki; Endo, Tomohiro*
Proceedings of 2025 International Congress on Advances in Nuclear Power Plants (ICAPP 2025) (Internet), 11 Pages, 2025/09
During a reactor power increase in ULOF and UTOP events in sodium-cooled fast reactors, core deformation due to thermal expansion of core elements is expected to cause a negative feed-back effect to suppress this power increase. An analytical evaluation method of core deformation reactivity for design is being developed in JAEA. However, the neutronics calculation module uses several approximations. This study aims to develop the detailed evaluation method as a reference neutron transport calculation code for confirmation of the validity of the calculated core deformation reactivity. Here, the two-dimensional finite volume method (FVM) code based on simplified P3 (SP3) approximation with unstructured mesh have been developed as the first step of the development. This paper describes the calculation theory of the FVM code, the procedure of introducing SP3 approximation into the code and the verification results of the functions developed.
Kawai, Yusaku*; Park, J.*; Motokawa, Ryuhei; Ikura, Ryohei*; Murayama, Shunsuke*; Yamaoka, Kenji*; Fujii, Yoshihisa*; Ikemoto, Yuka*; Tanaka, Masaru*; Matsuba, Go*; et al.
ACS Applied Polymer Materials (Internet), 7(12), p.7767 - 7776, 2025/06
Yamamoto, Keisuke; Nakagawa, Takuya; Shimojo, Hiroto; Kijima, Jun; Miura, Daiya; Onose, Yoshihiko*; Namba, Koji*; Uchida, Hiroaki*; Sakamoto, Kazuhiko*; Ono, Chika*; et al.
JAEA-Technology 2024-019, 211 Pages, 2025/02
JAEA-Technology-2024-019.pdf:35.35MB
The uranium enrichment facilities at the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency (JAEA) were constructed sequentially to develop uranium enrichment technology with centrifugal separation method. The developed technologies were transferred to Japan Nuclear Fuel Limited until 2001. And the original purpose has been achieved. Wastewater Treatment Facility, one of the uranium enrichment facilities, was constructed in 1976 to treat radioactive liquid waste generated at the facilities, and it finished the role in 2008. In accordance with the Medium/Long-Term Management Plan of JAEA Facilities, interior equipment installed in this facility had been dismantled and removed since November 2021 to August 2023. This report summarizes the findings obtained through the work related to the contamination inspection methods cancellation the controlled area of Wastewater Treatment Facility from September 2023 to March 2024.
-ray fieldsKaburagi, Masaaki; Kamada, Kei*; Ishii, Junya*; Matsumoto, Tetsuro*; Manabe, Seiya*; Masuda, Akihiko*; Harano, Hideki*; Kato, Masahiro*; Shimazoe, Kenji*
Journal of Instrumentation (Internet), 19(11), p.P11019_1 - P11019_16, 2024/11
Times Cited Count：1 Percentile：18.53(Instruments & Instrumentation)Matsuba, Kenichi; Kato, Shinya; Kamiyama, Kenji; Akaev, A. S.*; Vurim, A. D.*; Baklanov, V. V.*
Proceedings of 31st International Conference on Nuclear Engineering (ICONE31) (Internet), 7 Pages, 2024/11
During a severe accident in sodium-cooled fast reactors, molten core materials could be discharged from the core region toward the lower sodium region of the reactor vessel through coolant channels, such as control rod guide tubes. Typical SFRs have a sodium plenum with limited depth and volume, such as the core inlet plenum located under the core region. Therefore, it is important to evaluate the coolability of molten core materials discharged into a depth- and volume-limited sodium plenum. In the present study, to deepen the understanding on the coolability of molten core materials discharged into such a sodium plenum, conditions under which molten core materials form solidified fragments were discussed based on an experiment discharging a molten fuel simulant (molten Al2O3) into a test vessel filled with liquid sodium.
Doda, Norihiro; Kato, Shinya; Hamase, Erina; Kuwagaki, Kazuki; Kikuchi, Norihiro; Ohgama, Kazuya; Yoshimura, Kazuo; Yoshikawa, Ryuji; Yokoyama, Kenji; Uwaba, Tomoyuki; et al.
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.946 - 959, 2023/08
An innovative design system named ARKADIA is being developed to realize the design of advanced nuclear reactors as safe, economical, and sustainable carbon-free energy sources. This paper focuses on ARKADIA-Design for design studies as a part of ARKADIA and introduces representative verification methods for numerical analysis methods of the core design. ARKADIA-Design performs core performance analysis of sodium-cooled fast reactors using a multiphysics approach that combines neutronics, thermal-hydraulics, core mechanics, and fuel pin behavior analysis codes. To confirm the validity of these analysis codes, validation matrices are identified with reference to experimental data and reliable numerical analysis results. The analysis models in these codes and the representative practices for the validation matrices are described.
Kokubu, Yoko; Fujita, Natsuko; Watanabe, Takahiro; Matsubara, Akihiro; Ishizaka, Chika; Miyake, Masayasu*; Nishio, Tomohiro*; Kato, Motohisa*; Ogawa, Yumi*; Ishii, Masahiro*; et al.
Nuclear Instruments and Methods in Physics Research B, 539, p.68 - 72, 2023/06
Times Cited Count：2 Percentile：47.86(Instruments & Instrumentation)The JAEA-AMS-TONO facility at the Tono Geoscience Center, JAEA has an accelerator mass spectrometer (JAEA-AMS-TONO-5MV). The spectrometer enabled us to use a multi-nuclide AMS of carbon-14 (
C), beryllium-10, aluminium-26 and iodine-129, and we have recently been proceeding test measurement of chlorine-36. In response to an increase of samples, we installed a state-of-the-art multi-nuclide AMS with a 300 kV Tandetron accelerator in 2020. Recently, we are driving the development of techniques of isobar separation in AMS and of sample preparation. Ion channeling is applied to remove isobaric interference and we are building a prototype AMS based on this technique for downsizing of AMS. The small sample graphitization for C has been attempted using an automated graphitization equipment equipped with an elemental analyzer.
Doda, Norihiro; Kato, Shinya; Iida, Masaki*; Yokoyama, Kenji; Tanaka, Masaaki
Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 8 Pages, 2022/10
In the conventional core design in sodium-cooled fast reactors (SFRs), negative reactivity feedback due to core deformation was neglected because of large uncertainty in analytical evaluation. To optimize core design, it is necessary to develop an analytical evaluation method and eliminate excessive conservativeness. An evaluation method for core deformation reactivity has been developed by coupling analysis of neutronics, thermal-hydraulics, and structural mechanics. For the verification study of the neutronics calculation method, the reactivity was calculated for the deformed core geometry in which the fuel assembly (FA) moved horizontally in the radial direction for each row from the core center. Compared to reference values derived from Monte Carlo calculations, the calculated reactivity due to FA displacement agreed well in the core region and was overestimated in the reflector region. The modification challenges in development of the core deformation model were identified.
Matsushita, Hatsuki*; Kobayashi, Ren*; Sakai, Takaaki*; Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 9 Pages, 2022/09
During core disruptive accidents in sodium-cooled fast reactors, the molten core material flows through flow channels, such as the control rod guide tubes, into the core inlet plenum under the core region. The molten core material can be cooled and solidified while impinging on a horizontal plate of the inlet plenum in a sodium coolant. However, the solidification and cooling behaviors of molten core materials impinged on a horizontal structure have not been sufficiently studied thus far. Notably, this is an important phenomenon that needs to be elucidated from the perspective of improving the safety of sodium-cooled fast reactors. Accordingly, a series of experiments on discharging a simulated molten core material (alumina: Al
O
) into a sodium coolant on a horizontal structure was conducted at the experimental facility of the National Nuclear Center of the Republic of Kazakhstan. In this study, analyses on the sodium experiments using SIMMER-III as the fast reactor safety evaluation code were performed. The analysis methods were validated by comparing the results and experiment data. In addition, the cooling and solidification behaviors during jet impingement were evaluated. The results indicated that the molten core material exhibited fragmentation owing to the impingement on the horizontal plate and was, therefore, scattered toward the periphery. Furthermore, the simulated molten core material was evaluated to be cooled by sodium and subsequently solidified.
Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji; Akaev, A.*; Vurim, A.*; Baklanov, V.*
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
The In-Vessel Retention (IVR) of molten-core in Core Disruptive Accidents (CDAs) is of prime importance in enhancing the safety of sodium-cooled fast reactors. One of the main subjects in ensuring IVR is to design the Control Rod Guide Tube (CRGT) which allows effective discharge of molten core materials from the core region. The effectiveness of the CRGT design is assessed through CDA analyses, and it is reasonable for these analyses to develop a computer code collaborated with experimental researches. Thus, experiments addressing the discharge behavior of the molten-core materials through the CRGT have proceeded as one of the subjects in the collaboration research named the EAGLE-3 project, and the obtained experimental results are reflected in the development of the SIMMER code. In this project, a series of out-of-pile tests using molten-alumina as the fuel simulant was conducted to understand the discharge behavior of molten-core materials through the CRGT. In this study, in order to investigate the effect of an internal structure in the CRGT on the discharge behavior of the molten-core materials, the data of an out-of-pile test in which the molten-alumina penetrated to a duct with the internal structure were analyzed. In addition, the post-test analysis using the SIMMER code was conducted and the results were compared with the test results.
Co radiation source under an intense 
Cs radiation field using an application-specific CeBr
spectrometer suited for use in intense radiation fieldsKaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Takahashi, Hiroyuki*
Journal of Nuclear Science and Technology, 59(8), p.983 - 992, 2022/08
Times Cited Count：2 Percentile：23.45(Nuclear Science & Technology)Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Kamiyama, Kenji; Matsuba, Kenichi; Kato, Shinya; Imaizumi, Yuya; Mukhamedov, N.*; Akayev, A.*; Pakhnits, A.*; Vurim, A.*; Baklanov, V.*
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 9 Pages, 2022/04
-ray spectrometer and its performance under intense Cs and Co radiation fieldsKaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*
Nuclear Instruments and Methods in Physics Research A, 1010, p.165544_1 - 165544_9, 2021/09
Times Cited Count：0 Percentile：0.00(Instruments & Instrumentation)The number of nuclear facilities being decommissioned has been increasing worldwide, in particular following the accident of the Tokyo Electric Power Company Holdings' Fukushima Daiichi Nuclear Power Station in 2011. In these nuclear facilities, proper management of radioactive materials is required. Then, A -ray spectrometer with four segmentations using small volume CeBr scintillators with a dimension of 
was developed. The four scintillators were coupled to a multi-anode photomultiplier tube specific to intense radiation fields. We performed the -ray exposure study under Cs and Co radiation fields. Under the Cs radiation field, the relative energy resolution at 1375 mSv/h was the relative energy resolution at 1375 mSv/h was 9.2
0.05%, 8.00.08%, 8.0
0.03%, and 9.00.04% for the four channels, respectively.
Matsuba, Kenichi; Kato, Shinya; Kamiyama, Kenji; Akayev, A. S.*; Baklanov, V. V.*
Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 4 Pages, 2021/08
In order to obtain experimental knowledge on fragmentation and cooling behavior of molten core material discharged into regions where the depth and volume of sodium are limited, a series of out-of-pile experiments using molten alumina as a simulant for molten core material was conducted. It was found that following mechanisms might be involved in the fragmentation and cooling behavior in a shallow sodium pool: (1) FCI which occurs at location of impingement of the molten jet on the bottom plate promotes fragmentation. (2) If there is a sufficient amount of sodium as a heat sink outside the region, heat exchange by sodium flow in and out due to vapor expansion and condensation suppresses the sodium temperature rise. (3) This temperature suppression contributes to effective cooling of molten core material. In the future study, in order to confirm the mechanisms which was clarified in this study, analytical evaluation of the experimental result will be carried out using a simulation tool.
Fukuda, Tatsuya*; Takahashi, Ryo*; Hara, Takuhi*; Ohara, Koji*; Kato, Kazuo*; Matsumura, Daiju; Inaba, Yusuke*; Nakase, Masahiko*; Takeshita, Kenji*
Journal of Nuclear Science and Technology, 58(4), p.399 - 404, 2021/04
Times Cited Count：8 Percentile：56.21(Nuclear Science & Technology) scintillator under intense -ray fields for nuclear decommissioningKaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 988, p.164900_1 - 164900_8, 2021/02
Times Cited Count：14 Percentile：80.37(Instruments & Instrumentation)An increasing number of nuclear facilities have been decommissioned worldwide following the 2011 accident of the TEPCO' Fukushima Daiichi Nuclear Power Station. During the decommissioning, radioactive materials have to be retrieved under proper management. In this study, a small cubic CeBr spectrometer with dimensions of 5 mm 
5 mm 5 mm was manufactured to perform -ray spectroscopy under intense -ray fields. Furthermore, thanks to a fast digital process unit and a customized photomultiplier, the device could perform -ray spectroscopy at dose rates of over 1 Sv/h. The energy resolution (FWHM) at 662 keV ranged from 4.4% at 22 mSv/h to 5.2% at 1407 mSv/h for a Cs radiation field. Correspondingly, at 1333 keV, it ranged from 3.1% at 26 mSv/h to 4.2% at 2221 mSv/h for a Co radiation field, which suggested to realize -ray assessment of 
Cs, Cs, Co, and 
Eu at dose rates of over 1 Sv/h.
Watanabe, Hiromichi*; Morimoto, Kyoichi; Watanabe, Masashi; Kato, Masato; Arita, Yuji*; Konashi, Kenji*
Thermochimica Acta, 693, p.178763_1 - 178763_6, 2020/11
Multi-stepwise pulse calorimetry is proposed for accurate, efficient measurements of thermophysical properties of not only ideal but also practical samples over a wide temperature range. In a single experiment for a few seconds, the sample is rapidly heated from 298 K up to the final step-temperature of around 2850 K in a multi-stepwise fashion with numerous step-temperatures, at each of which the sample attains a steady-state condition while it is maintained for an instant. The proposed calorimetry is suitable for measuring enthalpy at numerous different temperatures, because multiple enthalpy-change values between the brief steady-state conditions can be obtained in a single experiment. As a feasibility demonstration, the specific enthalpy and its uncertainty in the temperature range 1050
2850 K have been determined for Mo and W, respectively. The measured enthalpies and emissivities are compared with the corresponding standard data.
Igarashi, Kai*; Onuki, Ryoji*; Sakai, Takaaki*; Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji
Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 6 Pages, 2020/08
Kato, Shinya; Matsuba, Kenichi; Kamiyama, Kenji; Ganovichev, D. A.*; Baklanov, V. V.*
Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05
In order to ensure In-Vessel Retention (IVR) of molten-core in Core Disruptive Accident (CDA), we are investigating the possibility of the molten-core discharge through the control rod guide tube (CRGT) to prevent energetics due to exceeding the prompt criticality. Internal structures of the CRGT, such as a sodium-flow regulator when the CRGT is connected to the high-pressure plenum, may disturb the discharge of molten-core from the core region. Based on above background, an experimental program to clarify characteristics of molten-core discharge through the CRGT has been commenced as one of subjects under a joint study with National Nuclear Center of the Republic of Kazakhstan (NNC-RK) named EAGLE-3 project. An experiment using molten-alumina as fuel simulant and sodium was conducted at the out-of-pile test facility owned by NNC-RK to investigate sodium cooling effect around the sodium flow regulator on its destruction. The experimental result represented that void development at the initiation of molten-alumina discharge eliminated liquid-phase sodium from the discharge path and this also eliminated sodium cooling effect around the sodium flow regulator. As a result, early destruction of the sodium flow regulator and massive discharge of molten alumina occurred in turn.
