Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Otani, Kyohei; Kato, Chiaki; Igarashi, Takahiro
Corrosion, 79(11), p.1277 - 1286, 2023/11
Kokubu, Yoko; Fujita, Natsuko; Watanabe, Takahiro; Matsubara, Akihiro; Ishizaka, Chika; Miyake, Masayasu*; Nishio, Tomohiro*; Kato, Motohisa*; Ogawa, Yumi*; Ishii, Masahiro*; et al.
Nuclear Instruments and Methods in Physics Research B, 539, p.68 - 72, 2023/06
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)The JAEA-AMS-TONO facility at the Tono Geoscience Center, JAEA has an accelerator mass spectrometer (JAEA-AMS-TONO-5MV). The spectrometer enabled us to use a multi-nuclide AMS of carbon-14 (
C), beryllium-10, aluminium-26 and iodine-129, and we have recently been proceeding test measurement of chlorine-36. In response to an increase of samples, we installed a state-of-the-art multi-nuclide AMS with a 300 kV Tandetron accelerator in 2020. Recently, we are driving the development of techniques of isobar separation in AMS and of sample preparation. Ion channeling is applied to remove isobaric interference and we are building a prototype AMS based on this technique for downsizing of AMS. The small sample graphitization for C has been attempted using an automated graphitization equipment equipped with an elemental analyzer.
-ray analysisKinoshita, Norikazu*; Noto, Takuma*; Nakajima, Hitoshi*; Kosako, Kazuaki*; Kato, Takahiro*; Kuroiwa, Yoichi*; Kurabe, Misako*; Sasaki, Yuki*; Torii, Kazuyuki*; Maeda, Makoto; et al.
Journal of Radioanalytical and Nuclear Chemistry, 332(2), p.479 - 486, 2023/02
Times Cited Count：0 Percentile：0.01(Chemistry, Analytical)Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count：5 Percentile：87.42(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Igarashi, Takahiro; Otani, Kyohei; Komatsu, Atsushi; Kato, Chiaki; Sakairi, Masatoshi*
Bosei Kanri, 66(4), p.141 - 145, 2022/04
Metal corrosion is a material deterioration phenomenon based on electrochemical reactions on an atomic scale. In this paper, various methods for acquiring physical properties on metal surfaces using first-principles calculations were described. As examples of applying first-principles calculation to metal corrosion, the effect of hydrogen adsorption on the metal surface on the potential change and the effect of cation atoms in the aqueous solution on the corrosion resistance of the metal were reported.
Fujita, Natsuko; Matsubara, Akihiro; Miyake, Masayasu*; Watanabe, Takahiro; Kokubu, Yoko; Nishio, Tomohiro*; Ogawa, Yumi*; Kato, Motohisa*; Shimada, Akiomi; Ogata, Nobuhisa
Dai-33-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, P. 48, 2022/04
no abstracts in English
Igarashi, Takahiro; Komatsu, Atsushi; Kato, Chiaki; Sakairi, Masatoshi*
Tetsu To Hagane, 107(12), p.998 - 1003, 2021/12
Times Cited Count：0 Percentile：0(Metallurgy & Metallurgical Engineering)In order to clarify the effect of environmental factors on the amount of atmospheric corrosion of steel, novel model for predicting the reduction of atmospheric corrosion considering relative humidity and rain falls was developed. We conducted a one-year calculation simulation of atmospheric corrosion in Miyakojima City, Choshi City, and Tsukuba City using the developed model. Corrosion weight loss by the simulation could reproduce the measured value well. Corrosion weight loss at each point was greatly affected by the amount of flying sea salt, relative humidity, and rain falls.
Igarashi, Takahiro; Komatsu, Atsushi; Kato, Chiaki; Sakairi, Masatoshi*
Bosei Kanri, 65(10), p.365 - 370, 2021/10
We have developed a new atmospheric simulation model considering important environmental factors such as airborne sea salt, temperature, relative humidity, and rainfall. The developed model was verified by comparing predicted values by the simulation and measured data for the weight loss by atmospheric corrosion. In addition, atmospheric corrosion simulations under open and sheltered exposure condition were conducted, and it was confirmed that the air corrosion weight loss was strongly suppressed by the surface cleaning effect due to rainfall.
Igarashi, Takahiro; Otani, Kyohei; Kato, Chiaki; Sakairi, Masatoshi*; Togashi, Yusuke*; Baba, Kazuhiko*; Takagi, Shusaku*
ISIJ International, 61(4), p.1085 - 1090, 2021/04
Times Cited Count：1 Percentile：7.67(Metallurgy & Metallurgical Engineering)In order to clarify the effect of metal cations (Zn
, Mg, Na
) in aqueous solution on hydrogen permeation into iron, the amount of hydrogen permeation from iron surface was measured by electrochemical tests with a laser ablation. Moreover, in order to obtain the basic mechanism of hydrogen permeation with metal cation, first-principles calculations were used to acquire the adsorption potential of the metal cation and the electronic state around iron surface. By Zn in solution, anodic reaction on ablated surface by laser irradiation was suppressed. Also, by quantum analysis Zn atoms were chemically bonded stronger than Na and Mg atoms to iron surface. It was suggested that the dissolution reaction of iron was suppressed by the formation of the Zn layer, and that lead suppression of hydrogen permeation into iron.
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.
Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03
Times Cited Count：44 Percentile：97.1(Astronomy & Astrophysics)Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 
C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.
Yasuda, Satoshi; Tamura, Kazuhisa; Terasawa, Tomoo; Yano, Masahiro; Nakajima, Hideaki*; Morimoto, Takahiro*; Okazaki, Toshiya*; Agari, Ryushi*; Takahashi, Yasufumi*; Kato, Masaru*; et al.
Journal of Physical Chemistry C, 124(9), p.5300 - 5307, 2020/03
Times Cited Count：14 Percentile：59.2(Chemistry, Physical)Confinement of hydrogen molecules at graphene-substrate interface has presented significant importance from the viewpoints of development of fundamental understanding of two-dimensional material interface and energy storage system. In this study, we investigate H
confinement at a graphene-Au interface by combining selective proton permeability of graphene and the electrochemical hydrogen evolution reaction (electrochemical HER) method. After HER on a graphene/Au electrode in protonic acidic solution, scanning tunneling microscopy finds that H nanobubble structures can be produced between graphene and the Au surface. Strain analysis by Raman spectroscopy also shows that atomic size roughness on the graphene/Au surface originating from the HER-induced strain relaxation of graphene plays significant role in formation of the nucleation site and H storage capacity.
Fujita, Natsuko; Matsubara, Akihiro; Miyake, Masayasu*; Watanabe, Takahiro; Kokubu, Yoko; Kato, Motohisa*; Okabe, Nobuaki*; Isozaki, Nobuhiro*; Ishizaka, Chika*; Nishio, Tomohiro; et al.
Proceedings of the 8th East Asia Accelerator Mass Spectrometry Symposium and the 22nd Japan Accelerator Mass Spectrometry symposium (EA-AMS 8 & JAMS-22), p.34 - 36, 2020/00
no abstracts in English
Kokubu, Yoko; Fujita, Natsuko; Miyake, Masayasu; Watanabe, Takahiro; Ishizaka, Chika; Okabe, Nobuaki; Ishimaru, Tsuneari; Matsubara, Akihiro*; Nishizawa, Akimitsu*; Nishio, Tomohiro*; et al.
Nuclear Instruments and Methods in Physics Research B, 456, p.271 - 275, 2019/10
Times Cited Count：5 Percentile：48.18(Instruments & Instrumentation)JAEA-AMS-TONO has been in operation at the Tono Geoscience Center, Japan Atomic Energy Agency since 1998 and 20 years have passed from the beginning of its utilization. The AMS system is a versatile system based on a 5 MV tandem Pelletron type accelerator. The system has been used to measure carbon-14 (C), beryllium-10 (
Be) and aluminium-26 (
Al). In addition, the development of measurement of iodine-129 (
I) has been started. The main use is measurement of C in geological samples for dating studies in neotectonics and hydrogeology. In order to increase the speed of sample preparation, we introduced the automated graphitization equipment and made a gas-strip line to collect dissolved inorganic carbon in groundwater samples. Measurement of Be and Al has been used for geoscience studies and the detection limit in the measurement of Be was improved by 
Be-counting suppression. Recently tuning of measurement condition of I has been progressed.
Yamamoto, Masahiro; Irisawa, Eriko; Igarashi, Takahiro; Komatsu, Atsushi; Kato, Chiaki; Ueno, Fumiyoshi
Proceedings of Annual Congress of the European Federation of Corrosion (EUROCORR 2019) (Internet), 5 Pages, 2019/09
Intergranular corrosion phenomena were analysed using modified reprocessing solution. The data indicated that corrosion rates increased with time at the initial stage, and these stayed at constant value. Intergranular corrosion propagated at grain boundary in the initial stage and then attacked whole grain boundary causing drop out of grains. Corrosion rates of steady state were sum of intergranular corrosion amounts and weight losses of dropped grains. Surface appearances and cross sections of corroded samples were analyzed. The results indicated that the initial stage of intergranular corrosion was characterized by the ratio of corrosion rates between grain boundary and matrix. These ratios differed from individual grain boundaries. Total corrosion rates were affected by the distribution of these ratios. These data were based on the numerical modelling of intergranular corrosion using cellular automata. And also, calculated results were compared with these analytical data.
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Arai, Takehiko*; Nakauchi, Yusuke*; Nakamura, Tomoki*; Matsuoka, Moe*; et al.
Science, 364(6437), p.272 - 275, 2019/04
Times Cited Count：262 Percentile：99.73(Multidisciplinary Sciences)The near-Earth asteroid 162173 Ryugu, the target of Hayabusa2 sample return mission, is believed to be a primitive carbonaceous object. The Near Infrared Spectrometer (NIRS3) on Hayabusa2 acquired reflectance spectra of Ryugu's surface to provide direct measurements of the surface composition and geological context for the returned samples. A weak, narrow absorption feature centered at 2.72 micron was detected across the entire observed surface, indicating that hydroxyl (OH)-bearing minerals are ubiquitous there. The intensity of the OH feature and low albedo are similar to thermally- and/or shock-metamorphosed carbonaceous chondrite meteorites. There are few variations in the OH-band position, consistent with Ryugu being a compositionally homogeneous rubble-pile object generated from impact fragments of an undifferentiated aqueously altered parent body.
Watanabe, Takahiro; Kokubu, Yoko; Fujita, Natsuko; Ishizaka, Chika*; Nishio, Tomohiro; Matsubara, Akihiro*; Miyake, Masayasu; Kato, Motohisa*; Isozaki, Nobuhiro*; Torazawa, Hitoshi*; et al.
JAEA-Conf 2018-002, p.116 - 119, 2019/02
AMS is widely used for radiocarbon dating of geological samples. However, improvement in efficiency of sample preparation techniques are needed for high-time resolution dataset. In 2016, automated graphitization equipment (AGE3, IonPlus AG) has been installed in Toki Research Institute of Isotope Geology and Geochronology, Tono Geoscience Center, JAEA. Background values and carbon recovery rates during preparation process of AGE3 should be estimated before application in radiocarbon dating. In this study, the AGE3 system was evaluated using the international standard materials (IAEA-C1, C4, C5, C6, C7, C9 and NIST-SRM4990C) at JAEA-AMS-TONO. Graphite samples was prepared by the AGE3 system and radiocarbon concentration of these standards was measured by AMS. The results were agreement with the consensus values. Background values were 0.15
0.01 pMC (IAEA-C1) using the AGE3 system. Therefore, we concluded that the system can be adapted for radiocarbon dating of geological samples.
Kokubu, Yoko; Fujita, Natsuko; Matsubara, Akihiro*; Nishizawa, Akimitsu*; Nishio, Tomohiro; Miyake, Masayasu; Ishimaru, Tsuneari; Watanabe, Takahiro; Ogata, Nobuhisa; Shimada, Akiomi; et al.
JAEA-Conf 2018-002, p.5 - 8, 2019/02
no abstracts in English
Fujita, Natsuko; Miyake, Masayasu; Watanabe, Takahiro; Kokubu, Yoko; Ishimaru, Tsuneari; Matsubara, Akihiro*; Nishio, Tomohiro*; Kato, Motohisa*; Isozaki, Nobuhiro*; Torazawa, Hitoshi*; et al.
JAEA-Conf 2018-013, p.96 - 99, 2019/02
no abstracts in English
Fujita, Natsuko; Miyake, Masayasu; Watanabe, Takahiro; Kokubu, Yoko; Matsubara, Akihiro*; Kato, Motohisa*; Okabe, Nobuaki; Isozaki, Nobuhiro*; Ishizaka, Chika*; Torazawa, Hitoshi*; et al.
Dai-31-Kai Tandemu Kasokuki Oyobi Sono Shuhen Gijutsu No Kenkyukai Hokokushu, p.92 - 95, 2018/12
no abstracts in English
Iwata, Takahiro*; Kitazato, Kohei*; Abe, Masanao*; Otake, Makiko*; Arai, Takehiko*; Arai, Tomoko*; Hirata, Naru*; Hiroi, Takahiro*; Honda, Chikatoshi*; Imae, Naoya*; et al.
Space Science Reviews, 208(1-4), p.317 - 337, 2017/07
Times Cited Count：54 Percentile：71.62(Astronomy & Astrophysics)NIRS3: The Near Infrared Spectrometer is installed on the Hayabusa2 spacecraft to observe the target C-type asteroid 162173 Ryugu at near infrared wavelengths of 1.8 to 3.2 micrometer. It aims to obtain reflectance spectra in order to detect absorption bands of hydrated and hydroxide minerals in the 3 micrometer-band. We adopted a linear-image sensor with indium arsenide (InAs) photo diodes and a cooling system with a passive radiator to achieve an optics temperature of 188 K, which enables to retaining sufficient sensitivity and noise level in the 3 micrometer wavelength region. We conducted ground performance tests for the NIRS3 flight model (FM) to confirm its baseline specifications. The results imply that the properties such as the signal-to-noise ratio (SNR) conform to scientific requirements to determine the degree of aqueous alteration, such as CM or CI chondrite, and the stage of thermal metamorphism on the asteroid surface.
