Quantitative analysis of ionization quenching in CaF:Ce using PHITS track-structure simulations

Hirata, Yuho; Kai, Takeshi; Ogawa, Tatsuhiko; Matsuya, Yusuke; Sato, Tatsuhiko; Watanabe, Kenichi*; Kato, Takumi*; Kawaguchi, Noriaki*; Yanagida, Takayuki*

Radiation Measurements, 193, p.107651_1 - 107651_8, 2026/04

https://doi.org/10.1016/j.radmeas.2026.107651

CaF:Ce has a high potential to be used as a dosimeter due to its high optically stimulated luminescence (OSL) intensity. However, when phosphors such as CaF:Ce are irradiated with swift ions, the OSL intensity per dose decreases due to quenching effects. Traditionally, quenching effects in phosphors have been evaluated based on energy deposition density, using linear energy transfer (LET) as a metric. However, the relationship between quenching effects and LET varies with ion type, complicating unified evaluations. The track structure in PHITS can precisely simulate the radiation interactions. In this study, we simulated the detector response of CaF:Ce irradiated with swift-ions and compared these results with experimental data. The comparison suggests that the quantum yield of OSL is a critical parameter influencing the quenching effect in CaF:Ce. These findings are expected to contribute to the development of improved phosphor detectors.

Chirality-induced phonon-spin conversion at an interface

Funato, Takumi*; Matsuo, Mamoru; Kato, Takeo*

Physical Review Letters, 132(23), p.236201_1 - 236201_7, 2024/06

https://doi.org/10.1103/PhysRevLett.132.236201

Pressure-modulated magnetism and negative thermal expansion in the HoFe intermetallic compound

Cao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; Kato, Kenichi*; Hattori, Takanori; et al.

Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04

https://doi.org/10.1021/acs.chemmater.3c00158

Hydrostatic and chemical pressure are efficient stimuli to alter the crystal structure and are commonly used for tuning electronic and magnetic properties in materials science. However, chemical pressure is difficult to quantify and a clear correspondence between these two types of pressure is still lacking. Here, we study intermetallic candidates for a permanent magnet with a negative thermal expansion (NTE). Based on in situ synchrotron X-ray diffraction, negative chemical pressure is revealed in HoFe on Al doping and quantitatively evaluated by using temperature and pressure dependence of unit cell volume. A combination of magnetization and neutron diffraction measurements also allowed one to compare the effect of chemical pressure on magnetic ordering with that of hydrostatic pressure. Intriguingly, pressure can be used to control suppression and enhancement of NTE. Electronic structure calculations indicate that pressure affected the top of the majority band with respect to the Fermi level, which has implications for the magnetic stability, which in turn plays a critical role in modulating magnetism and NTE. This work presents a good example of understanding the effect of pressure and utilizing it to control properties of functional materials.

Modulation of Dirac electrons in epitaxial BiSe ultrathin films on van der Waals ferromagnet CrSiTe

Kato, Takemi*; Sugawara, Katsuaki*; Ito, Naohiro*; Yamauchi, Kunihiko*; Sato, Takumi*; Oguchi, Tamio*; Takahashi, Takashi*; Shiomi, Yuki*; Saito, Eiji; Sato, Takafumi*

Physical Review Materials (Internet), 4(8), p.084202_1 - 084202_6, 2020/08

https://doi.org/10.1103/PhysRevMaterials.4.084202

The Catalog of solidification and volume reduction technologies for the treatment of radioactive waste generated by the decommissioning of Fukushima Daiichi Nuclear Power Station

Kato, Jun; Nakagawa, Akinori; Taniguchi, Takumi; Sakakibara, Tetsuro; Nakazawa, Osamu; Meguro, Yoshihiro

JAEA-Review 2017-015, 173 Pages, 2017/07

JAEA-Review-2017-015.pdf:6.67MB

Various radioactive wastes have been generated at the Fukushima Daiichi Nuclear Power Station (1F). To dispose of the wastes underground, it is necessary to make a suitable waste package by the volume reduction and solidification of the wastes. To plan the future decommissioning of 1F, it is also necessary to estimate feasibility of existing treatment technology for those wastes. Therefore the document survey has been performed about volume reduction and solidification technologies that have domestic or foreign experiences of practical treatment for radioactive wastes to assist selection of suitable treatment of the wastes. This report shows the arranged results. The 1F wastes are classified into two groups, homogeneous particulate and liquid wastes and heterogeneous solid wastes. The needful items for the feasibility study such as a technology name, a fundamental principle, treatment efficiency, and characteristic of solidified waste are summarized in each group.

Development of electrochemical hydrogen pump under vacuum condition for a compact tritium gas cycling system

Kato, Mineo; Ito, Takeshi*; Sugai, Hiroyuki; Kawamura, Yoshinori; Hayashi, Takumi; Nishi, Masataka; Tanase, Masakazu; Matsuzaki, Teiichiro*; Ishida, Katsuhiko*; Nagamine, Kanetada*

Fusion Science and Technology, 41(3), p.859 - 862, 2002/05

JAERI has a plane to develop a compact tritium gas recycling system for fusion research. This system is also very attractive for the muon-catalyzed fusion (CF) research at RIKEN-RAL Muon Facility in UK. For the research, JAERI has produced high purity tritium gas of 1,500 Ci and transported it to the Facility. In the CF experiments, the tritium gas was diluted by the deuterium in an optional concentration and the used tritium gas was carried back by the tritium transport container developed to JAERI. If it is possible to recycle the diluted tritium gas, i.e., the used tritium gas is enriched in the experimental site, the CF experiments should be conducted efficiently. rom the above point of view, in this paper, we propose the compact tritium gas recycling system based on the gas chromatography that has already developed in JAERI and a proton conductor.

Mechanisms and kinetics of the post-spinel transformation in MgSiO

Kubo, Tomoaki*; Otani, Eiji*; Kato, Takumi*; Urakawa, Satoru*; Suzuki, Akio*; Kambe, Yuichi*; Funakoshi, Kenichi*; Utsumi, Wataru; Kikegawa, Takumi*; Fujino, Kiyoshi*

Physics of the Earth and Planetary Interiors, 129(1-2), p.153 - 171, 2002/01

https://doi.org/10.1016/S0031-9201(01)00270-9

no abstracts in English

The Effect of temperature, pressure, and sulfur content on viscosity of the Fe-FeS melt

Terasaki, Hidenori*; Kato, Takumi*; Urakawa, Satoru*; Funakoshi, Kenichi*; Suzuki, Akio*; Okada, Taku; Maeda, Makoto*; Sato, Jin*; Kubo, Tomoaki*; Kasai, Shizu*

Earth and Planetary Science Letters, 190(1-2), p.93 - 101, 2001/07

https://doi.org/10.1016/S0012-821X(01)00374-0

The Fe-FeS melt is thought to be the major candidate of the outer core material. Its viscosity is one of the most important physical properties to study the dynamics of the convection in the outer core. We performed the in situ viscosity measurement of the Fe-FeS melt under high pressure using X-ray radiography falling sphere method with a novel sample assembly. Viscosity was measures in the temperature, pressure, and compositional conditions of 1233-1923 K, 1.5-6.9 GPa, and Fe-Fe S (wt %), respectively. The viscosity coefficients obtained by 17 measurements change systematically in the range of 0.008-0.036 Pa s. An activation energy of the viscous flow, 30 kJ/mol, and the activation volume, 1.5 cm /mol, are determined as the temperature and pressure dependence, and the viscosity of the Fe S melt is found to be smaller than that of the Fe melt by 15 %. These tendencies can be well correlated with the structural variation of the Fe-FeS melt.

MOX fuel technologies for next-generation nuclear reactors, 2; Study of thermal conductivity and irradiation behavior for MOX fuel

Oki, Takumi; Kato, Masato; Ikusawa, Yoshihisa; Hirooka, Shun

no journal, , 

The thermal conductivity in high temperature range considering Bredick transition was studied based on the irradiation test data, and the irradiation behavior was evaluated using our analytical code. The thermal conductivity considering Bredick transition increases from around 1500 K and peaks around 2200 K. By evaluating the irradiation behavior using this thermal conductivity, it was confirmed that the fuel center temperature from low temperature range to just below the melting point reproduced the measured value.

Elucidation of microbial reduction of permanganate, and absorption behavior of heavy metals

Kato, Tomoaki*; Onuki, Toshihiko; Yu, Q.; Saito, Takumi

no journal, , 

no abstracts in English