Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakajima, Kenji; Kawakita, Yukinobu; Ito, Shinichi*; Abe, Jun*; Aizawa, Kazuya; Aoki, Hiroyuki; Endo, Hitoshi*; Fujita, Masaki*; Funakoshi, Kenichi*; Gong, W.*; et al.
Quantum Beam Science (Internet), 1(3), p.9_1 - 9_59, 2017/12
The neutron instruments suite, installed at the spallation neutron source of the Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex (J-PARC), is reviewed. MLF has 23 neutron beam ports and 21 instruments are in operation for user programs or are under commissioning. A unique and challenging instrumental suite in MLF has been realized via combination of a high-performance neutron source, optimized for neutron scattering, and unique instruments using cutting-edge technologies. All instruments are/will serve in world-leading investigations in a broad range of fields, from fundamental physics to industrial applications. In this review, overviews, characteristic features, and typical applications of the individual instruments are mentioned.
Dorn, C. K.*; Tsuchiya, Kunihiko; Takemoto, Noriyuki; Ito, Masayasu; Hori, Junichi*; Chekushina, L.*; Hatano, Yuji*; Chakrov, P.*; Kawamura, Hiroshi
Proceedings of 6th International Symposium on Material Testing Reactors (ISMTR-6) (Internet), 9 Pages, 2013/10
no abstracts in English
Watahiki, Shunsuke; Hanakawa, Hiroki; Imaizumi, Tomomi; Nagata, Hiroshi; Ide, Hiroshi; Komukai, Bunsaku; Kimura, Nobuaki; Miyauchi, Masaru; Ito, Masayasu; Nishikata, Kaori; et al.
JAEA-Technology 2013-021, 43 Pages, 2013/07
JAEA-Technology-2013-021.pdf:5.12MB
The number of research reactors in the world is decreasing because of their aging. On the other hand, the necessity of research reactor, which is used for human resources development, progress of the science and technology, industrial use and safety research is increasing for the countries which are planning to introduce the nuclear power plants. From above background, the Neutron Irradiation and Testing Reactor Center began to discuss a basic concept of Multipurpose Compact Research Reactor (MCRR) for education and training, etc., on 2010 to 2012. This activity is also expected to contribute to design tool improvement and human resource development in the center. In 2011, design study of reactor core, irradiation facilities with high versatility and practicality, and hot laboratory equipment for the production of Mo-99 was carried out. As the result of design study of reactor core, subcriticality and operation time of the reactor in consideration of an irradiation capsule, and about the transient response of the reactor to the reactivity disturbance during automatic control operation, it was possible to do automatic operation of MCRR, was confirmed. As the result of design study of irradiation facilities, it was confirmed that the implementation of an efficient mass production radioisotope Mo-99 can be expected. As the result of design study with hot laboratory facilities, Mo-99 production, RI export devised considered cell and facilities for exporting the specimens quickly was designed.
Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Watahiki, Shunsuke; Nagata, Hiroshi; Hanakawa, Hiroki; Naka, Michihiro; Kawamata, Kazuo; Yamaura, Takayuki; Ide, Hiroshi; et al.
JAEA-Technology 2011-031, 123 Pages, 2012/01
JAEA-Technology-2011-031.pdf:16.08MB
The number of research reactors in the world is decreasing because of their aging. However, the planning to introduce the nuclear power plants is increasing in Asian countries. In these Asian countries, the key issue is the human resource development for operation and management of nuclear power plants after constructed them, and also the necessity of research reactor, which is used for lifetime extension of LWRs, progress of the science and technology, expansion of industry use, human resources training and so on, is increasing. From above backgrounds, the Neutron Irradiation and Testing Reactor Center began to discuss basic concept of a multipurpose low-power research reactor for education and training, etc. This design study is expected to contribute not only to design tool improvement and human resources development in the Neutron Irradiation and Testing Reactor Center but also to maintain and upgrade the technology on research reactors in nuclear power-related companies. This report treats the activities of the working group from July 2010 to June 2011 on the multipurpose low-power research reactor in the Neutron Irradiation and Testing Reactor Center and nuclear power-related companies.
Kurome, Kazuya*; Kawamura, Masaya*; Enuma, Yasuhiro*; Tsujita, Yoshihiro*; Sato, Mitsuru*; Futagami, Satoshi; Hayafune, Hiroki
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles (FR 2009) (CD-ROM), 11 Pages, 2012/00
Kisohara, Naoyuki; Ishikawa, Hiroyasu; Futagami, Satoshi; Xu, Y.*; Shimoji, Kuniyuki*; Kawamura, Masaya*
Proceedings of 19th International Conference on Nuclear Engineering (ICONE-19) (CD-ROM), 9 Pages, 2011/10
The cooling system of the JSFR adopts an integrated primary sodium pump/intermediate heat exchanger (IHX), dual structure straight tube steam generator (SG) and short elbow sodium piping layout. Since, however, this is the first experience applying these technologies to SFRs in Japan, design approaches have been evaluated and R&D has been undertaken. This paper addresses the design study of the cooling system of the demonstration reactor JSFR in terms of thermal-hydraulic and structural integrity. Recent studies have shown that these new technologies have potential to be applied to the JSFR.
Tobita, Kenji; Nishio, Satoshi*; Enoeda, Mikio; Nakamura, Hirofumi; Hayashi, Takumi; Asakura, Nobuyuki; Uto, Hiroyasu; Tanigawa, Hiroyasu; Nishitani, Takeo; Isono, Takaaki; et al.
JAEA-Research 2010-019, 194 Pages, 2010/08
JAEA-Research-2010-019-01.pdf:48.47MBJAEA-Research-2010-019-02.pdf:19.4MB
This report describes the results of the conceptual design study of the SlimCS fusion DEMO reactor aiming at demonstrating fusion power production in a plant scale and allowing to assess the economic prospects of a fusion power plant. The design study has focused on a compact and low aspect ratio tokamak reactor concept with a reduced-sized central solenoid, which is novel compared with previous tokamak reactor concept such as SSTR (Steady State Tokamak Reactor). The reactor has the main parameters of a major radius of 5.5 m, aspect ratio of 2.6, elongation of 2.0, normalized beta of 4.3, fusion out put of 2.95 GW and average neutron wall load of 3 MW/m
. This report covers various aspects of design study including systemic design, physics design, torus configuration, blanket, superconducting magnet, maintenance and building, which were carried out increase the engineering feasibility of the concept.
Tobita, Kenji; Nishio, Satoshi; Sato, Masayasu; Sakurai, Shinji; Hayashi, Takao; Shibama, Yusuke; Isono, Takaaki; Enoeda, Mikio; Nakamura, Hirofumi; Sato, Satoshi; et al.
Nuclear Fusion, 47(8), p.892 - 899, 2007/08
Times Cited Count：57 Percentile：86.6(Physics, Fluids & Plasmas)The concept for a compact DEMO reactor named "SlimCS" is presented. Distinctive features of the concept is low aspect ratio (
= 2.6) and use of a reduced-size center solenoid (CS) which has a function of plasma shaping rather than poloidal flux supply. The reduced-size CS enables us to introduce a thin toroidal field (TF) coil system which contributes to reducing the weight and construction cost of the reactor. SlimCS is as compact as advanced commercial reactor designs such as ARIES-RS and produces 1 GWe in spite of moderate requirements for plasma parameters. Merits of low-, i.e. vertical stability for high elongation and high beta limit are responsible for such reasonable physics requirements.
Tobita, Kenji; Nishio, Satoshi; Sato, Masayasu; Sakurai, Shinji; Hayashi, Takao; Shibama, Yusuke; Isono, Takaaki; Enoeda, Mikio; Nakamura, Hirofumi; Sato, Satoshi; et al.
Proceedings of 21st IAEA Fusion Energy Conference (FEC 2006) (CD-ROM), 8 Pages, 2006/10
no abstracts in English
Tobita, Kenji; Nishio, Satoshi; Enoeda, Mikio; Sato, Masayasu; Isono, Takaaki; Sakurai, Shinji; Nakamura, Hirofumi; Sato, Satoshi; Suzuki, Satoshi; Ando, Masami; et al.
Fusion Engineering and Design, 81(8-14), p.1151 - 1158, 2006/02
Times Cited Count：123 Percentile：99.01(Nuclear Science & Technology)no abstracts in English
Nishio, Satoshi; Omori, Junji*; Kuroda, Toshimasa*; Tobita, Kenji; Enoeda, Mikio; Tsuru, Daigo; Hirose, Takanori; Sato, Satoshi; Kawamura, Yoshinori; Nakamura, Hirofumi; et al.
Fusion Engineering and Design, 81(8-14), p.1271 - 1276, 2006/02
Times Cited Count：20 Percentile：78.83(Nuclear Science & Technology)The design guideline for the blanket is decided to meet the mission of the DEMO plant which is expected to use technologies to be proven by 2020 and present an economical prospect of fusion energy in the operational time of the reactor. To moderate the technological extrapolation, the structural material of reduced activation ferritic steel (F82H), ceramic tritium breeder of Li
TiO
and neutron multiplier of Be are introduced. To improve the economical aspect, the coolant material of the supercritical water with inlet/outlet temperatures of 280/510
C, coolant pressure of 25 MPa is chosen. Resultantly the thermal efficiency of 41% is achieved. To obtain higher plasma performance, MHD instabilities suppressing shell structure is adopted with structural compatibility to the blanket structure. To meet higher plant availability requirement (more than 75%), the hot cell maintenance approach is selected for the replaceable power core components.
Kondo, Masaya; Nakamura, Hideo; Anoda, Yoshinari; Saishu, Sadanori*; Obata, Hiroyuki*; Shimada, Rumi*; Kawamura, Shinichi*
Proceedings of 10th International Conference on Nuclear Engineering (ICONE 10) (CD-ROM), 9 Pages, 2002/00
no abstracts in English
Shimazaki, Masanori; Hayafune, Hiroki; Futagami, Satoshi; Enuma, Yasuhiro*; Kawamura, Masaya*; Ogumo, Shinya*
no journal, ,
no abstracts in English
Hayafune, Hiroki; Futagami, Satoshi; Sato, Mitsuru*; Kawamura, Masaya*; Kotake, Shoji*
no journal, ,
A steam generator (SG) with double-walled straight tubes is being developed as a candidate of innovative technology for Japan Sodium-cooled Fast Reactor in the Fast Reactor Cycle Technology Development (FaCT) project. This paper reports the result of applicability study of the innovative technology.
Fukasawa, Tsuyoshi*; Shimoji, Kuniyuki*; Kawamura, Masaya*; Okamura, Shigeki*; Kisohara, Naoyuki; Enuma, Yasuhiro
no journal, ,
no abstracts in English
Futagami, Satoshi; Enuma, Yasuhiro; Kawamura, Masaya*; Kanda, Hironori*; Ichihara, Takashi*
no journal, ,
no abstracts in English
Kawamura, Masaya*; Ushiki, Hiroshi*; Enuma, Yasuhiro; Futagami, Satoshi; Ogumo, Shinya*; Ichihara, Takashi*; Nakashima, Takashi*
no journal, ,
no abstracts in English
Amano, Katsunori; Enuma, Yasuhiro; Futagami, Satoshi; Ushiki, Hiroshi*; Kawamura, Masaya*; Ichihara, Takashi*
no journal, ,
no abstracts in English
Kanda, Hironori; Enuma, Yasuhiro; Futagami, Satoshi; Kawamura, Masaya*; Ushiki, Hiroshi*; Ogumo, Shinya*; Ichihara, Takashi*; Nakashima, Takashi*
no journal, ,
