Soft, wearable, microfluidic system for fluorometric analysis of loss of amino acids through eccrine sweat

Cho, S. H.*; Cho, S. W.*; Lv, Z.*; Sekine, Yurina; Liu, S.*; Zhou, M.*; Nuxoll, R. F.*; Kanatzidis, E. E.*; Ghaffari, R.*; Kim, D.*; et al.

Lab on a Chip, 9 Pages, 2025/00

https://doi.org/10.1039/D4LC00734D

Amino acids are essential for protein synthesis and metabolic processes in support of homeostatic balance and healthy body functions. This study quantitatively investigates eccrine sweat as a significant channel for loss of amino acids during exercise, to improve an understanding of amino acid turnover and to provide feedback to users on the need for supplement intake. The measurement platform consists of a soft, skin-interfaced microfluidic system for real-time analysis of amino acid content in eccrine sweat. This system relies on integrated fluorometric assays and smartphone-based imaging techniques for quantitative analysis.

Suppression of segmental chain dynamics on a particle's surface in well-dispersed polymer nanocomposites

Kim, J.*; Thompson, B. R.*; Tominaga, Taiki*; Osawa, Takahito; Egami, Takeshi*; Frster, S.*; Ohl, M.*; Senses, E.*; Faraone, A.*; Wagner, N. J.*

ACS Macro Letters (Internet), 13(6), p.720 - 725, 2024/06

https://doi.org/10.1021/acsmacrolett.4c00168

The Rouse dynamics of polymer chains in model nanocomposite PolyEthylene Oxide (PEO)/Silica NanoParticles (NPs) was investigated using QuasiElastic Neutron Scattering (QENS). The apparent Rouse rate of the polymer chains decreases as the particle loading increases. However, there is no evidence of an immobile segment population on the probed time scale of tens of ps. The slowing down of the dynamics is interpreted in terms of modified Rouse models for the chains in the NP inter-phase region. Thus, two chain populations, one bulk like and the other characterized by a suppression of Rouse modes, are identified. The spatial extent of the interphase region is estimated to be about twice the adsorbed layer thickness, or about 2 nm. These findings provide a detailed description of the suppression of the chain dynamics on the surface of NPs. These results are relevant insights on surface effects and confinement and provide a foundation for the understanding of the rheological properties of Polymer NanoComposites (PNCs) with well-dispersed NPs.

Tetrahedral triple-Q magnetic ordering and large spontaneous Hall conductivity in the metallic triangular antiferromagnet CoTaS

Park, P.*; Cho, W.*; Kim, C.*; An, Y.*; Kang, Y.-G.*; Avdeev, M.*; Sibille, R.*; Iida, Kazuki*; Kajimoto, Ryoichi; Lee, K. H.*; et al.

Nature Communications (Internet), 14, p.8346_1 - 8346_9, 2023/12

https://doi.org/10.1038/s41467-023-43853-4

Level structures of Ca cast doubt on a doubly magic Ca

Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; Tsunoda, Yusuke*; Otsuka, Takaharu*; Chazono, Yoshiki*; Hagen, G.*; Holt, J. D.*; et al.

Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08

https://doi.org/10.1016/j.physletb.2023.138025

Gamma decays were observed in Ca and Ca following quasi-free one-proton knockout reactions from Sc. For Ca, a ray transition was measured to be 1456(12) keV, while for Ca an indication for a transition was observed at 1115(34) keV. Both transitions were tentatively assigned as the decays. A shell-model calculation in a wide model space with a marginally modified effective nucleon-nucleon interaction depicts excellent agreement with experiment for level energies, two-neutron separation energies, and reaction cross sections, corroborating the formation of a new nuclear shell above the N = 34 shell. Its constituents, the and orbitals, are almost degenerate. This degeneracy precludes the possibility for a doubly magic Ca and potentially drives the dripline of Ca isotopes to Ca or even beyond.

"Southwestern" boundary of the island of inversion; First study of low-lying bound excited states in V and V

Elekes, Z.*; Juhsz, M. M.*; Sohler, D.*; Sieja, K.*; Yoshida, Kazuki; Ogata, Kazuyuki*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; Baba, Hidetada*; et al.

Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12

https://doi.org/10.1103/PhysRevC.106.064321

The low-lying level structure of V and V was investigated for the first time. The neutron knockout reaction and inelastic proton scattering were applied for V while the neutron knock-out reaction provided the data for V. Four and five new transitions were determined for V and V, respectively. Based on the comparison to our shell-model calculations using the Lenzi-Nowacki-Poves-Sieja (LNPS) interaction, three of the observed rays for each isotope could be placed in the level scheme and assigned to the decay of the first 11/2 and 9/2 levels. The (,) excitation cross sections for V were analyzed by the coupled-channels formalism assuming quadrupole plus hexadecapole deformations. Due to the role of the hexadecapole deformation, V could not be unambiguously placed on the island of inversion.

The Muon linac project at J-PARC

Kondo, Yasuhiro; Kitamura, Ryo; Fuwa, Yasuhiro; Morishita, Takatoshi; Moriya, Katsuhiro; Takayanagi, Tomohiro; Otani, Masashi*; Cicek, E.*; Ego, Hiroyasu*; Fukao, Yoshinori*; et al.

Proceedings of 31st International Linear Accelerator Conference (LINAC 2022) (Internet), p.636 - 641, 2022/09

https://doi.org/10.18429/JACoW-LINAC2022-WE1AA05

The muon linac project for the precise measurement of the muon anomalous magnetic and electric dipole moments, which is currently one of the hottest issues of the elementary particle physics, is in progress at J-PARC. The muons from the J-PARC muon facility are once cooled to room temperature, then accelerated up to 212 MeV with a normalized emittance of 1.5 mm mrad and a momentum spread of 0.1%. Four types of accelerating structures are adopted to obtain the efficient acceleration with a wide beta range from 0.01 to 0.94. The project is moving into the construction phase. We already demonstrated the re-acceleration scheme of the decelerated muons using a 324-MHz RFQ in 2017. The high-power test of the 324-MHz Interdigital H-mode (IH) DTL using a prototype cavity was performed in 2021. The fabrication of the first module of 14 modules of the 1296-MHz Disk and Washer (DAW) CCL will be done to confirm the production process. Moreover, the final design of the travelling wave accelerating structure for the high beta region is also proceeding. In this paper, the recent progress toward the realization of the world first muon linac will be presented.

CSNI leak-before-break benchmark; Summary of phase 1

Tregoning, R.*; Wallace, J.*; Bouydo, A.*; Costa-Garrido, O.*; Dillstrm, P.*; Duan, X.*; Heckmann, K.*; Kim, Y.-B.*; Kim, Y.*; Kurth-Twombly, E.*; et al.

Transactions of the 26th International Conference on Structural Mechanics in Reactor Technology (SMiRT-26) (Internet), 11 Pages, 2022/07

Fourteen organizations, representing eleven countries, participated in a leak-before-break (LBB) benchmark exercise that compared results from analyses among participating countries and identified the effects of weld residual stress (WRS) and crack morphology on crack opening displacement (COD), critical bending moment (CBM), and leak rate (LR) results. The participants determined whether the initial problem would meet their country's LBB acceptance criteria and then evaluated the effects of crack morphology and WRS for a prescribed crack size, geometry and loading. Six out of fourteen participants indicated that the initial problem met their LBB requirements. In the follow-on tasks, differences among the participant's CBM predictions were principally due to the material properties used in the analysis while the type of failure model chosen contributed much less. Most of the differences in the LR predictions were directly attributable to differences among the COD models, but a portion was attributable to the treatment of crack face pressure (CFP). The benchmark identified several aspects of an LBB analysis that could support a more realistic evaluation.

Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys

Wei, D.*; Wang, L.*; Zhang, Y.*; Gong, W.; Tsuru, Tomohito; Lobzenko, I.; Jiang, J.*; Harjo, S.; Kawasaki, Takuro; Bae, J. W.*; et al.

Acta Materialia, 225, p.117571_1 - 117571_16, 2022/02

https://doi.org/10.1016/j.actamat.2021.117571

Work hardening behavior of hot-rolled metastable FeCoNiAlTiMo medium-entropy alloy; In situ neutron diffraction analysis

Kwon, H.*; Harjo, S.; Kawasaki, Takuro; Gong, W.; Jeong, S. G.*; Kim, E. S.*; Sathiyamoorthi, P.*; Kato, Hidemi*; Kim, H. S.*

Science and Technology of Advanced Materials, 23(1), p.579 - 586, 2022/00

https://doi.org/10.1080/14686996.2022.2122868

The High temperature gas-cooled reactor

Ftterer, M. A.*; Strydom, G.*; Sato, Hiroyuki; Li, F.*; Abonneau, E.*; Abram, T.*; Davies, M. W.*; Kim, M. H.*; Edwards, L.*; Muransky, O.*; et al.

Encyclopedia of Nuclear Energy, Vol.1, p.512 - 522, 2021/06

https://doi.org/10.1016/B978-0-12-409548-9.12205-5

The HTR is a relatively simple Small Modular Reactor design featuring demonstrated robust passive and inherent safety. It responds to the needs of a very large and growing process heat market in most industrialized countries many of which pursue a stringent policy of reducing fossil fuel burn. The manuscript starts from historical developments. This article also highlights the most significant recent achievements of this technology internationally and explains its potential value in a modern energy economy beyond pure electricity generation. The article concludes with an outlook on work towards building demonstration plants, which are required to de-risk private investments and to incentivize deployment.