Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kim, M.*; Lee, C.*; Sugita, Yutaka; Kim, J.-S.*; Jeon, M.-K.*
Geomechanics for Energy and the Environment, 41, p.100628_1 - 100628_9, 2025/03
Times Cited Count:0 Percentile:0.00(Energy & Fuels)This study investigates the impact of primary variables selection on the modeling of non-isothermal two-phase flow, by using the numerical work on the full-scale Engineered Barrier System (EBS) experiment conducted at Horonobe URL as part of the DECOVALEX-2023 project. A validated numerical model is employed to simulate the coupled thermo-hydrological behavior of heterogeneous porous media within the EBS. Two different primary variable schemes are compared in discretizing the governing equations, revealing significant difference in results.
Kim, J.*; Thompson, B. R.*; Tominaga, Taiki*; Osawa, Takahito; Egami, Takeshi*; Frster, S.*; Ohl, M.*; Senses, E.*; Faraone, A.*; Wagner, N. J.*
ACS Macro Letters (Internet), 13(6), p.720 - 725, 2024/06
Times Cited Count:1 Percentile:34.46(Polymer Science)The Rouse dynamics of polymer chains in model nanocomposite PolyEthylene Oxide (PEO)/Silica NanoParticles (NPs) was investigated using QuasiElastic Neutron Scattering (QENS). The apparent Rouse rate of the polymer chains decreases as the particle loading increases. However, there is no evidence of an immobile segment population on the probed time scale of tens of ps. The slowing down of the dynamics is interpreted in terms of modified Rouse models for the chains in the NP inter-phase region. Thus, two chain populations, one bulk like and the other characterized by a suppression of Rouse modes, are identified. The spatial extent of the interphase region is estimated to be about twice the adsorbed layer thickness, or about 2 nm. These findings provide a detailed description of the suppression of the chain dynamics on the surface of NPs. These results are relevant insights on surface effects and confinement and provide a foundation for the understanding of the rheological properties of Polymer NanoComposites (PNCs) with well-dispersed NPs.
Park, P.*; Cho, W.*; Kim, C.*; An, Y.*; Avdeev, M.*; Iida, Kazuki*; Kajimoto, Ryoichi; Park, J.-G.*
Physical Review B, 109(6), p.L060403_1 - L060403_7, 2024/02
Times Cited Count:6 Percentile:86.08(Materials Science, Multidisciplinary)Liao, L.*; Puebla, J.*; Yamamoto, Kei; Kim, J.*; Maekawa, Sadamichi*; Hwang, Y.*; Ba, Y.*; Otani, Yoshichika*
Physical Review Letters, 131(17), p.176701_1 - 176701_6, 2023/10
Times Cited Count:8 Percentile:80.53(Physics, Multidisciplinary)Lind, T.*; Kalilainen, J.*; Marchetto, C.*; Beck, S.*; Nakamura, Koichi*; Kino, Chiaki*; Maruyama, Yu; Kido, Kentaro; Kim, S. I.*; Lee, Y.*; et al.
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.4796 - 4809, 2023/08
Yasue, Ayumu*; Kawakami, Mayu*; Kobayashi, Kensuke*; Kim, J.*; Miyazu, Yuji*; Nishio, Yuhei*; Mukai, Tomohisa*; Morooka, Satoshi; Kanematsu, Manabu*
Quantum Beam Science (Internet), 7(2), p.15_1 - 15_14, 2023/05
Shibata, Goro; Won, C.*; Kim, J.*; Nonaka, Yosuke*; Ikeda, Keisuke*; Wan, Y.*; Suzuki, Masahiro*; Koide, Tsuneharu*; Tanaka, Arata*; Cheong, S.-W.*; et al.
Photon Factory Activity Report 2022 (Internet), 2 Pages, 2023/00
no abstracts in English
Hosokawa, Takayuki*; Yasue, Ayumu*; Kim, J.*; Kurita, Keisuke; Kanematsu, Manabu*
Konkurito Kozobutsu No Hoshu, Hokyo, Appuguredo Rombun Hokokushu (CD-ROM), 22, p.113 - 118, 2022/10
no abstracts in English
Tregoning, R.*; Wallace, J.*; Bouydo, A.*; Costa-Garrido, O.*; Dillstrm, P.*; Duan, X.*; Heckmann, K.*; Kim, Y.-B.*; Kim, Y.*; Kurth-Twombly, E.*; et al.
Transactions of the 26th International Conference on Structural Mechanics in Reactor Technology (SMiRT-26) (Internet), 11 Pages, 2022/07
Fourteen organizations, representing eleven countries, participated in a leak-before-break (LBB) benchmark exercise that compared results from analyses among participating countries and identified the effects of weld residual stress (WRS) and crack morphology on crack opening displacement (COD), critical bending moment (CBM), and leak rate (LR) results. The participants determined whether the initial problem would meet their country's LBB acceptance criteria and then evaluated the effects of crack morphology and WRS for a prescribed crack size, geometry and loading. Six out of fourteen participants indicated that the initial problem met their LBB requirements. In the follow-on tasks, differences among the participant's CBM predictions were principally due to the material properties used in the analysis while the type of failure model chosen contributed much less. Most of the differences in the LR predictions were directly attributable to differences among the COD models, but a portion was attributable to the treatment of crack face pressure (CFP). The benchmark identified several aspects of an LBB analysis that could support a more realistic evaluation.
Tang, J.*; Seo, O.*; Rivera Rocabado, D. S.*; Koitaya, Takanori*; Yamamoto, Susumu*; Namba, Yusuke*; Song, C.*; Kim, J.*; Yoshigoe, Akitaka; Koyama, Michihisa*; et al.
Applied Surface Science, 587, p.152797_1 - 152797_8, 2022/06
Times Cited Count:11 Percentile:67.59(Chemistry, Physical)The hydrogen absorption and diffusion mechanisms on cube-shaped Pd nanoparticles (NPs) which are important hydrogen-storage materials were studied using X-ray photoelectron spectroscopy and DFT calculations. In the surface region, hydrogen absorption showed almost similar behavior regardless of the NPs size. It was found that the octahedral sites are more favorable than the tetrahedral sites for hydrogen occupation. We also clarified that the hydrogen atoms absorbing on the smaller-sized Pd NPs diffuse to the subsurface more actively because of the weakened Pd-H bond by the surface disordering, which plays an important role in hydrogen adsorption at a low H pressure.
Kaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*
Nuclear Instruments and Methods in Physics Research A, 1010, p.165544_1 - 165544_9, 2021/09
Times Cited Count:0 Percentile:0.00(Instruments & Instrumentation)The number of nuclear facilities being decommissioned has been increasing worldwide, in particular following the accident of the Tokyo Electric Power Company Holdings' Fukushima Daiichi Nuclear Power Station in 2011. In these nuclear facilities, proper management of radioactive materials is required. Then, A -ray spectrometer with four segmentations using small volume CeBr
scintillators with a dimension of
was developed. The four scintillators were coupled to a multi-anode photomultiplier tube specific to intense radiation fields. We performed the
-ray exposure study under
Cs and
Co radiation fields. Under the
Cs radiation field, the relative energy resolution at 1375 mSv/h was the relative energy resolution at 1375 mSv/h was 9.2
0.05%, 8.0
0.08%, 8.0
0.03%, and 9.0
0.04% for the four channels, respectively.
Kaburagi, Masaaki; Shimazoe, Kenji*; Kato, Masahiro*; Kurosawa, Tadahiro*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 988, p.164900_1 - 164900_8, 2021/02
Times Cited Count:14 Percentile:82.89(Instruments & Instrumentation)An increasing number of nuclear facilities have been decommissioned worldwide following the 2011 accident of the TEPCO' Fukushima Daiichi Nuclear Power Station. During the decommissioning, radioactive materials have to be retrieved under proper management. In this study, a small cubic CeBr spectrometer with dimensions of 5 mm
5 mm
5 mm was manufactured to perform
-ray spectroscopy under intense
-ray fields. Furthermore, thanks to a fast digital process unit and a customized photomultiplier, the device could perform
-ray spectroscopy at dose rates of over 1 Sv/h. The energy resolution (FWHM) at 662 keV ranged from 4.4% at 22 mSv/h to 5.2% at 1407 mSv/h for a
Cs radiation field. Correspondingly, at 1333 keV, it ranged from 3.1% at 26 mSv/h to 4.2% at 2221 mSv/h for a
Co radiation field, which suggested to realize
-ray assessment of
Cs,
Cs,
Co, and
Eu at dose rates of over 1 Sv/h.
Gens, A.*; Alcoverro, J.*; Blaheta, R.*; Hasal, M.*; Michalec, Z.*; Takayama, Yusuke; Lee, C.*; Lee, J.*; Kim, G. Y.*; Kuo, C.-W.*; et al.
International Journal of Rock Mechanics and Mining Sciences, 137, p.104572_1 - 104572_19, 2021/01
Times Cited Count:23 Percentile:87.93(Engineering, Geological)Bentonite-based engineered barriers are a key component of many repository designs for the confinement of high-level radioactive waste and spent fuel. Given the complexity and interaction of the phenomena affecting the barrier, coupled hydro-mechanical (HM) and thermo-hydro-mechanical (THM) numerical analyses are a potentially useful tool for a better understanding of their behaviour. In this context, a Task (INBEB) was undertaken to study, using numerical analyses, the hydro-mechanical and thermohydro-mechanical Interactions in Bentonite Engineered Barriers within the international cooperative project DECOVALEX 2019. Two large scale tests, largely complementary, were selected for modelling: EB and FEBEX. The EB experiment was carried out under isothermal conditions and artificial hydration and it was dismantled after 10.7 years. The FEBEX test was a temperature-controlled non-isothermal test combined with natural hydration that underwent two dismantling operations, a partial one after 5 years of heating and a final one after a total of 18.4 years of heating. Direct observation of the state of the barriers was possible during the dismantling operations. Four teams performed the HM and THM numerical analyses using a variety of computer codes, formulations and constitutive laws. For each experiment, the basic features of the analyses are described and the comparison between calculations and field observations are presented and discussed. Comparisons involve measurements performed during the performance of the test and data gathered during dismantling. A final evaluation of the performance of the modelling closes the paper.
Gens, A.*; Alcoverro, J.*; Blaheta, R.*; Hasal, M.*; Michalec, Z.*; Takayama, Yusuke; Lee, C.*; Lee, J.*; Kim, G. Y.*; Kuo, C.-W.*; et al.
LBNL-2001267 (Internet), 210 Pages, 2020/10
This document is the final report of Task D of the DECOVALEX-2019 project, presenting the definitions of the problems studied, approaches applied, achievements made and outstanding issues identified for future research. Task D of the DECOVALEX 2019 project is devoted to the study of the hydro-mechanical and thermo-hydro-mechanical Interactions in Bentonite Engineered Barriers. The Task is structured around two large scale in situ experiments that were subjected to well managed dismantling operations that provided direct observations of the state of the barrier after long test periods. Four teams carried out the modelling of the two experiments: Institute of Geonics, of the Czech Academy of Sciences (IGN), supported by SURAO, Czech Republic, Japan Atomic Energy Agency (JAEA), Korea Atomic Energy Research Institute (KAERI) and National Central University of Taiwan (NCU), supported by the Taipower.
Kaburagi, Masaaki; Shimazoe, Kenji*; Otaka, Yutaka*; Uenomachi, Mizuki*; Kamada, Kei*; Kim, K. J.*; Yoshino, Masao*; Shoji, Yasuhiro*; Yoshikawa, Akira*; Takahashi, Hiroyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 971, p.164118_1 - 164118_8, 2020/08
Times Cited Count:8 Percentile:60.88(Instruments & Instrumentation)Johnstone, E. V.*; Bailey, D. J.*; Lawson, S.*; Stennett, M. C.*; Corkhill, C. L.*; Kim, M.*; Heo, J.*; Matsumura, Daiju; Hyatt, N. C.*
RSC Advances (Internet), 10(42), p.25116 - 25124, 2020/07
Times Cited Count:4 Percentile:15.81(Chemistry, Multidisciplinary)Song, C.*; Seo, O.*; Matsumura, Daiju; Hiroi, Satoshi*; Cui, Y.-T.*; Kim, J.*; Chen, Y.*; Tayal, A.*; Kusada, Kohei*; Kobayashi, Hirokazu*; et al.
RSC Advances (Internet), 10(34), p.19751 - 19758, 2020/05
Times Cited Count:0 Percentile:0.00(Chemistry, Multidisciplinary)Kim, J.*; Yamanaka, Satoru*; Murayama, Ichiro*; Kato, Takanori*; Sakamoto, Tomokazu*; Kawasaki, Takuro; Fukuda, Tatsuo; Sekino, Toru*; Nakayama, Tadachika*; Takeda, Masatoshi*; et al.
Sustainable Energy & Fuels (Internet), 4(3), p.1143 - 1149, 2020/03
Times Cited Count:21 Percentile:64.07(Chemistry, Physical)Jung, W.*; Ahn, J. K.*; Hasegawa, Shoichi; Hicks, K.*; Hwang, S.*; Ichikawa, Yudai; Kim, S.*; Sako, Hiroyuki; Sato, Susumu; Tanida, Kiyoshi
JPS Conference Proceedings (Internet), 27, p.011007_1 - 011007_6, 2019/11
Hasegawa, Kunio; Li, Y.; Kim, Y.-J.*; Lacroix, V.*; Strnadel, B.*
Journal of Pressure Vessel Technology, 141(3), p.031201_1 - 031201_5, 2019/06
Times Cited Count:1 Percentile:4.88(Engineering, Mechanical)When discrete multiple flaws are in the same plane, and they are close to each other, it can be determined whether they are combined or standalone in accordance with combination rules provided by Fitness-For-Service (FFS) codes. However, specific criteria of the rules are different amongst these FFS codes. On the other hand, plastic collapse bending stresses for stainless steel pipes with two circumferential similar flaws were obtained by experiments and the prediction procedure for collapse stresses for pipes with two similar flaws were developed analytically. Using the experimental data and the analytical procedure, plastic collapse stresses for pipes with two similar flaws are compared with the stresses in compliance with the flaw combination criteria. It is shown that the calculated plastic collapse stresses based on the flaw combination criteria are significantly different from the experimental and analytical stresses.