Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Otani, Masashi*; Futatsukawa, Kenta*; Miyao, Tomoaki*; Liu, Y.*; Hirano, Koichiro; Kondo, Yasuhiro; Miura, Akihiko; Oguri, Hidetomo
Journal of Physics; Conference Series, 1350, p.012078_1 - 012078_5, 2019/12
Times Cited Count：1 Percentile：51.97(Physics, Particles & Fields)The Japan Proton Accelerator Research Complex (J-PARC) linac is operated with design peak current of 50 mA from 2018. For operation with such a high beam current, itis important to understand transverse and longitudinal beam properties especially in low-velocity region. A medium energy beam transport (MEBT1) line between the 3-MeV radio-frequency quadrupole linac (RFQ) and the 50-MeV drift-tube linac (DTL) is a 3-m-long transport line to match the beam to the DTL and produce a macro pulse configuration for a 3-GeV rapid-cycling synchrotron (RCS). In this paper, recent measurements and beam tuning results in MEBT1 will be presented.
' precipitates in nickel based oxide dispersion-strengthened superalloys under high-temperature and heavy irradiation conditionsKonno, Azusa; Ono, Naoko*; Ukai, Shigeharu*; Kondo, Sosuke*; Hashitomi, Okinobu*; Kimura, Akihiko*
Materials Transactions, 60(11), p.2260 - 2266, 2019/11
Times Cited Count：1 Percentile：6.1(Materials Science, Multidisciplinary)A stability of cuboidal ' phase under heavy irradiation was studied for newly developed Ni-based Oxide Dispersion Strengthened (ODS) superalloy as a candidate for the core structural materials in VHTR or GFR. The ion irradiation was applied at 873K, 1073K, 1273K and the dose was 100 dpa. The ' phase remained the cuboidal shape at 873K but got out of the shape at 1073K after irradiation. Those growths can be explained by the Nelson-Hudson-Mazey (NHM) model. For the result of 1273K irradiation, however, huge ' phase appeared in the whole irradiated area at the post irradiation-observation. This behavior is interpreted in terms of disordering of the ordered ' phase due to cascade collision, and thus increasing Gibbs free energy of the disordered phase induces a change of the element distribution inside the irradiated area. The ordered ' phase was reproduced from the disordered state at the cooling after ion irradiation.
Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kurata, Masaki; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Sato, Daiki*; Murakami, Nozomu*; et al.
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.206 - 216, 2019/09
After the nuclear accident at Fukushima Daiichi Power Plant, research and development (R&D) program for establishing technical basis of accident-tolerant fuel (ATF) started from 2015 in Japan. Since then, both experimental and analytical studies necessary for designing a new light water reactor (LWR) core with ATF candidate materials are being conducted within the Japanese ATF R&D Consortium for implementing ATF to the existing LWRs, accompanying with various technological developments required. Until now, we have accumulated experimental data of the candidate materials by out-of-pile tests, developed fuel evaluation codes to apply to the ATF candidate materials, and evaluated fuel behavior simulating operational and accidental conditions by the developed codes. In this paper, the R&D progresses of the ATF candidate materials considered in Japan are reviewed based on the information available such as proceedings of international conference and academic papers, providing an overview of ATF program in Japan.
Otani, Masashi*; Futatsukawa, Kenta*; Hirano, Koichiro; Kondo, Yasuhiro; Miura, Akihiko; Oguri, Hidetomo; Liu, Y.*
Nuclear Instruments and Methods in Physics Research A, 908, p.313 - 317, 2018/11
Times Cited Count：1 Percentile：11.47(Instruments & Instrumentation)It is extremely important to diagnose beams in accelerators to improve accelerator operation. In the low velocity section of a proton or heavy ion linac, the diagnostic method for longitudinal beam properties is less established compared to that for transverse properties. We have developed a new diagnostic method for the longitudinal bunch size by utilizing an RF deflector. We evaluated the uncertainty in bunch size measurement through simulation, and it was obtained as 0.5
. In addition, we measured longitudinal beam emittance through bunch size measurements at several RF amplitudes of an upstream buncher. The measured emittance was 0.13
0.01
deg
MeV, which was consistent with the simulation result.
Kondo, Keietsu; Aoki, So; Yamashita, Shinichiro; Ukai, Shigeharu*; Sakamoto, Kan*; Hirai, Mutsumi*; Kimura, Akihiko*
Nuclear Materials and Energy (Internet), 15, p.13 - 16, 2018/05
Times Cited Count：18 Percentile：87.82(Nuclear Science & Technology)Radiation hardening and microstructural evolution of ion irradiated 12Cr-6Al ODS ferritic steel was studied. Ion irradiation experiments were performed using Fe ions up to the nominal displacement damage of 20 dpa at the irradiation temperature was 300C. The monotonical increase of radiation hardening with dose was confirmed by experimentally obtained hardness data. The radiation hardening was also calculated theoretically by introducing the microstructural character examined by TEM into the dispersed barrier hardening model. The results showed a good agreement with the experimentally obtained data up to 5 dpa, while a slight discrepancy was found between theoretical and experimental hardness values at 20 dpa. Radiation hardening was mainly caused by irradiation-induced defect clusters below the irradiation dose of 5 dpa. As the irradiation dose increased toward 20 dpa, an additional influence of the radiation appeared, which was assumed to be induced by 
' phase transformation.
Yamashita, Shinichiro; Nagase, Fumihisa; Kurata, Masaki; Nozawa, Takashi; Watanabe, Seiichi*; Kirimura, Kazuki*; Kakiuchi, Kazuo*; Kondo, Takao*; Sakamoto, Kan*; Kusagaya, Kazuyuki*; et al.
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09
In Japan, the research and development (R&D) project on accident tolerant fuel and other components (ATFs) of light water reactors (LWRs) has been initiated in 2015 for establishing technical basis of ATFs. The Japan Atomic Energy Agency (JAEA) has coordinated and carried out this ATF R&D project in cooperation with power plant providers, fuel venders and universities for making the best use of the experiences, knowledges in commercial uses of zirconium-base alloys (Zircaloy) in LWRs. ATF candidate materials under consideration in the project are FeCrAl steel strengthened by dispersion of fine oxide particles(FeCrAl-ODS) and silicon carbide (SiC) composite, and are expecting to endure severe accident conditions in the reactor core for a longer period of time than the Zircaloy while maintaining or improving fuel performance during normal operations. In this paper, the progresses of the R&D project are reported.
Sakamoto, Kan*; Hirai, Mutsumi*; Ukai, Shigeharu*; Kimura, Akihiko*; Yamaji, Akifumi*; Kusagaya, Kazuyuki*; Kondo, Takao*; Yamashita, Shinichiro
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 7 Pages, 2017/09
This paper will show the overview of current status of development of accident tolerant FeCrAl-ODS fuel claddings for BWRs (boiling water reactors) in the program sponsored and organized by the Ministry of Economy, Trade and Industry (METI) of Japan. This program is being carried out to create the technical basis for the practical use of the accident tolerant fuels and the other components in LWRs through multifaceted activities. In the development of FeCrAl-ODS fuel claddings both the experimental and the analytical studies have been performed. The acquisition and accumulation of key material properties of FeCrAl-ODS fuel claddings were conducted by using bar, sheet and tube shaped FeCrAl-ODS materials fabricated in this program to support the evaluations in the analytical studies. A neutron irradiation test was also started in the ORNL High Flux Isotope Reactor (HFIR) to examine the effect of neutron irradiation on the mechanical properties.
Shibata, Takanori*; Ikegami, Kiyoshi*; Liu, Y.*; Maruta, Tomofumi*; Naito, Fujio*; Takagi, Akira*; Asano, Hiroyuki; Kondo, Yasuhiro; Miura, Akihiko; Oguri, Hidetomo; et al.
Proceedings of 28th International Linear Accelerator Conference (LINAC 2016) (Internet), p.251 - 253, 2017/05
After upgrade of J-PARC Linac in 2014, Low Energy Beam Transport (LEBT) beam commissioning of the J-PARC LINAC has been made for improving H
beam intensity extracted from Linac. Currents of two solenoid coils and steering magnets in LEBT are optimized with extraction and acceleration voltages for static acceleration in ion source (IS) which decides on an initial emittance diagram of H beam. As a result of LEBT and IS parameter optimization, beam transmission rate of RFQ has been reached up to 96% in 50 mA H current operation. Moreover, PIC-MC (Particle-In-Cell Monte-Carlo) simulation models developed for H transport in LEBT. Comparison between experimental and numerical results are presented to clarify beam physics from IS exit to RFQ entrance.
Kondo, Yasuhiro; Asano, Hiroyuki*; Chishiro, Etsuji; Hirano, Koichiro; Ishiyama, Tatsuya; Ito, Takashi; Kawane, Yusuke; Kikuzawa, Nobuhiro; Meigo, Shinichiro; Miura, Akihiko; et al.
Proceedings of 28th International Linear Accelerator Conference (LINAC 2016) (Internet), p.298 - 300, 2017/05
We have constructed a linac for development of various accelerator components at J-PARC. The ion source is same as the J-PARC linac's, and the RFQ is a used one in the J-PARC linac. The beam energy is 3 MeV and nominal beam current is 30 mA. The accelerator has been already commissioned, and the first development program, laser-charge-exchange experiment for the transmutation experimental facility, has been started. In this paper, present status of this 3-MeV linac is presented.
Takei, Hayanori; Chishiro, Etsuji; Hirano, Koichiro; Kondo, Yasuhiro; Meigo, Shinichiro; Miura, Akihiko; Morishita, Takatoshi; Oguri, Hidetomo; Tsutsumi, Kazuyoshi
Proceedings of 5th International Beam Instrumentation Conference (IBIC 2016) (Internet), p.736 - 739, 2017/03
The Accelerator-driven System (ADS) is one of the candidates for transmuting long-lived nuclides, such as minor actinide (MA), produced by nuclear reactors. For efficient transmutation of the MA, a precise pre-diction of neutronics of ADS is required. In order to obtain the neutronics data for the ADS, the Japan Pro-ton Accelerator Research Complex (J-PARC) has a plan to build the Transmutation Physics Experimental Facility (TEF-P), in which a 400-MeV negative proton (H) beam will be delivered from the J-PARC linac. Since the TEF-P requires a stable proton beam with a power of less than 10W, a stable and meticulous beam extraction method is required to extract a small amount of the proton beam from the high power beam using 250kW. To fulfil this requirement, the Laser Charge Exchange (LCE) method has been developed. The LCE strips the electron of the H beam and neutral protons will separate at the bending magnet in the proton beam transport. To demonstrate the charge exchange of the H, a preliminary LCE experiment was conducted using a linac with energy of 3MeV in J-PARC. As a result of the experiment, a charge-exchanged H
beam with a power of about 5W equivalent was obtained under the J-PARC linac beam condition, and this value almost satisfied the power requirement of the proton beam for the TEF-P.
Hirano, Koichiro; Asano, Hiroyuki; Ishiyama, Tatsuya; Ito, Takashi; Okoshi, Kiyonori; Oguri, Hidetomo; Kondo, Yasuhiro; Kawane, Yusuke; Kikuzawa, Nobuhiro; Sato, Yoshikatsu; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.310 - 313, 2016/11
We have used a beam scraper with the incident angle of 65deg to reduce the beam power deposition density in the MEBT between a 324 MHz RFQ and a 50-MeV DTL of the J-PARC linac. The 65 scraper was irradiated by the H beam up to particle number of 1.47E22. We observed a lot of surface projections with several hundred micrometers high in the beam irradiation damage on the scraper by using the laser microscope. In order to study the limits of scrapers, we constructed a new 3 MeV linac at J-PARC. We will conduct the scraper irradiation test at the end of this year.
Takei, Hayanori; Hirano, Koichiro; Tsutsumi, Kazuyoshi; Chishiro, Etsuji; Miura, Akihiko; Kondo, Yasuhiro; Morishita, Takatoshi; Oguri, Hidetomo; Meigo, Shinichiro
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.987 - 991, 2016/11
Accelerator-driven system (ADS) is one of candidates to transmute long-lived nuclides such as minor actinide (MA) produced at nuclear reactor. For efficient transmutation of the MA, precise prediction of neutronics of ADS is indispensable. In order to obtain the neutronics data for the ADS, J-PARC has a plan to build the Transmutation Physics Experimental Facility (TEF-P). Since the TEF-P requires stable power of the beam and will operate with thermal power less than 500 W and the proton beam power of 10 W so that a stable and meticulous beam extraction method is required to extract small amount of the beam from the high power LINAC beam with 250 kW. To fulfill requirement, Laser charge exchange method (LCE) has been developed for delivery of 400-MeV proton beam with 25Hz to the TEF-P. The LCE strips the electron of H beam and H
will separate at the bending magnet at the proton beam transport. The LCE device consists of YAG-laser with high power as 1.6 J/shot and 25 Hz and transport control system with high accuracy of the beam position. For the demonstration of the charge exchange of the H, the further LCE tests is conducted using H beam with energy of 3-MeV at RFQ test stand in J-PARC. In this paper, present status of LCE tests is presented.
Ogino, Chiaki*; Kahar, P.*; Lee, J. M.*; Sato, Katsuya; Ono, Yutaka; Kondo, Akihiko*
JAEA-Review 2015-022, JAEA Takasaki Annual Report 2014, P. 105, 2016/02
Hirano, Koichiro; Kondo, Yasuhiro; Kawane, Yusuke; Shinozaki, Shinichi; Miura, Akihiko; Morishita, Takatoshi; Sawabe, Yuki; Sugimura, Takashi*; Naito, Fujio*; Fang, Z.*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.944 - 947, 2015/09
Two RF-deflecting cavities as a chopper and a beam scraper have been used in the MEBT1 between a 324 MHz RFQ and a 50-MeV DTL of the J-PARC Linac. We replaced with a newly fabricated RF chopper to decrease beam loss for the operation with 50 mA. We installed two new scrapers to absorb the higher power of the deflected beam by the RF chopper. This paper describes the RF chopper system and beam irradiation test results of the scraper.
Kondo, Yasuhiro; Morishita, Takatoshi; Yamazaki, Saishun; Hori, Toshihiko; Sawabe, Yuki; Chishiro, Etsuji; Fukuda, Shimpei; Hasegawa, Kazuo; Hirano, Koichiro; Kikuzawa, Nobuhiro; et al.
Physical Review Special Topics; Accelerators and Beams, 17(12), p.120101_1 - 120101_8, 2014/12
Times Cited Count：6 Percentile：42.73(Physics, Nuclear)We performed a beam test of a new radio frequency quadrupole linac (RFQ III) for the beam current upgrade of the Japan Proton Accelerator Research Complex. First, the conditioning of RFQ III was conducted, and after 20 h of conditioning, RFQ III became very stable with a nominal peak power and duty factor of 400 kW and 1.5%, respectively. An off-line beam test was subsequently conducted before installation in the accelerator tunnel. The transmission, transverse emittance, and energy spread of the 50-mA negative hydrogen beam from RFQ III were measured and compared with simulation results. The experiment and simulation results showed good agreement; therefore, we conclude that the performance of RFQ III conforms to its design.
Oguri, Hidetomo; Hasegawa, Kazuo; Ito, Takashi; Chishiro, Etsuji; Hirano, Koichiro; Morishita, Takatoshi; Shinozaki, Shinichi; Ao, Hiroyuki; Okoshi, Kiyonori; Kondo, Yasuhiro; et al.
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.389 - 393, 2014/10
no abstracts in English
Hirano, Koichiro; Ito, Takashi; Kondo, Yasuhiro; Shinozaki, Shinichi; Chishiro, Etsuji; Miura, Akihiko; Morishita, Takatoshi; Ikegami, Masanori*; Kubota, Chikashi*; Sugimura, Takashi*; et al.
Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.858 - 861, 2014/06
Two RF-deflecting cavities as a chopper and a beam scraper have been used in the MEBT between a 324 MHz RFQ and a 50-MeV DTL of the J-PARC Linac. We plan to increase a peak beam current up to 50 mA by replacing an ion source and a RFQ after the summer shutdown in 2014. Beam loss occurs in the RF chopper for the 50 mA operation. Moreover, the beam scraper cannot fully stand the beam load with 50 mA, 0.5 ms, 3 MeV, and 25 Hz. We have studied the new RF chopper cavity by using HFSS code and the tandem scraper system with two scrapers.
Miyao, Tomoaki*; Miura, Akihiko; Kondo, Yasuhiro; Morishita, Takatoshi; Sugimura, Takashi*; Ouchi, Nobuo; Oguri, Hidetomo; Maruta, Tomofumi*; Naito, Fujio
Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1049 - 1052, 2014/06
In J-PARC linac, a project for energy and intensity upgrade has been progressed using 50 mA RFQ(Radio-Frequency-Quadrupole) linac cavity. Because the RFQ had already fabricated, test stand for its performance test was newly produced. In the test stand, we designed and fabricated the monitoring system including beam current monitors for the beam transmission measurement and the beam phase monitors for the energy measurement. We will refer the detail of the monitoring system and the data obtained during the performance test. New testing devices are also mentioned.
Wakai, Eiichi; Kim, B. J.; Nozawa, Takashi; Kikuchi, Takayuki; Hirano, Michiko*; Kimura, Akihiko*; Kasada, Ryuta*; Yokomine, Takehiko*; Yoshida, Takahide*; Nogami, Shuhei*; et al.
Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 6 Pages, 2013/03
Nishimura, Akihiko; Nogiwa, Kimihiro; Otobe, Tomohito; Okubo, Tadakatsu*; Hono, Kazuhiro*; Kondo, Keietsu; Yokoyama, Atsushi
Ultramicroscopy, 109(5), p.467 - 471, 2009/04
Times Cited Count：7 Percentile：28.99(Microscopy)Influence of femtosecond laser pulse condition on the performance of an energy compensated tomographic atom probe (ECOTAP) was investigated. Chirping ratio for laser pulses was controlled by a compressor stage. We have succeeded to get tomographic images of oxide dispersion strengthen steel, which will be used as fast breeder reactors. The ECOTAP successfully observed that the instability of the femtosecond laser pulses make the mass peaks slightly sifted or broadened to higher mass number. To investigate insulator materials, numerical simulation of conductivity increase on diamond has been successfully demonstrated.
