Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
10
W/cm
Skobelev, I. Yu.*; Ryazantsev, S. N.*; Kulikov, R. K.*; Sedov, M. V.*; Filippov, E. D.*; Pikuz, S. A.*; Asai, Takafumi*; Kanasaki, Masato*; Yamauchi, Tomoya*; Jinno, Satoshi; et al.
Photonics (Internet), 10(11), p.1250_1 - 1250_11, 2023/11
Times Cited Count：0 Percentile：0(Optics)It is challenging to clearly distinguish the impacts of the optical field and collisional ionization in the evolution of the charge state of a plasma produced when matter interacts with high-intensity laser pulses. In this work, time-dependent calculations of plasma kinetics are used to show that it is possible only when low-density gaseous targets with sufficiently small clusters are used. In the case of Ar plasma, the upper limit of the cluster radius was estimated to be 
m.
Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.
High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02
As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950
C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.
RhSiYamauchi, Hiroki; Sari, D. P.*; Watanabe, Isao*; Yasui, Yukio*; Chang, L.-J.*; Kondo, Keietsu; Ito, Takashi; Ishikado, Motoyuki*; Hagihara, Masato*; Frontzek, M. D.*; et al.
Communications Materials (Internet), 1, p.43_1 - 43_6, 2020/07
High-temperature short-range order is discovered up to 720 K in MnRhSi by complementary use of neutron scattering and muon spin relaxation measurements.
Kuroda, Kenta*; Arai, Yosuke*; Rezaei, N.*; Kunisada, So*; Sakuragi, Shunsuke*; Alaei, M.*; Kinoshita, Yuto*; Bareille, C.*; Noguchi, Ryo*; Nakayama, Mitsuhiro*; et al.
Nature Communications (Internet), 11, p.2888_1 - 2888_9, 2020/06
Times Cited Count：20 Percentile：75.49(Multidisciplinary Sciences)Ono, Masato; Iigaki, Kazuhiko; Sawahata, Hiroaki; Shimazaki, Yosuke; Shimizu, Atsushi; Inoi, Hiroyuki; Kondo, Toshinari; Kojima, Keidai; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 4(2), p.020906_1 - 020906_8, 2018/04
On March 11th, 2011, the 2011 off the Pacific coast of Tohoku Earthquake of magnitude 9.0 occurred. When the great earthquake occurred, the High Temperature Engineering Test Reactor (HTTR) had been stopped under the periodic inspection and maintenance of equipment and instruments. A comprehensive integrity evaluation was carried out for the HTTR facility because the maximum seismic acceleration observed at the HTTR exceeded the maximum value of design basis earthquake. The concept of comprehensive integrity evaluation is divided into two parts. One is the "visual inspection of equipment and instruments". The other is the "seismic response analysis" for the building structure, equipment and instruments using the observed earthquake. All equipment and instruments related to operation were inspected in the basic inspection. The integrity of the facilities was confirmed by comparing the inspection results or the numerical results with their evaluation criteria. As the results of inspection of equipment and instruments associated with the seismic response analysis, it was judged that there was no problem for operation of the reactor, because there was no damage and performance deterioration. The integrity of HTTR was also supported by the several operations without reactor power in cold conditions of HTTR in 2011, 2013 and 2015. Additionally, the integrity of control rod guide blocks was also confirmed visually when three control rod guide blocks and six replaceable reflector blocks were taken out from reactor core in order to change neutron startup sources in 2015.
Kondo, Masatoshi*; Okubo, Nariaki; Irisawa, Eriko; Komatsu, Atsushi; Ishikawa, Norito; Tanaka, Teruya*
Energy Procedia, 131, p.386 - 394, 2017/12
Times Cited Count：6 Percentile：95.25(Energy & Fuels)The chemical behaviors of lead (Pb) based coolants in the air ingress accident of fast reactors were investigated by means of the thermodynamic considerations and the static oxidation experiments for Pb alloys at various chemical compositions. The results of the static oxidation tests for lead-bismuth (Pb-Bi) alloys indicated that Pb was depleted from the alloy due to the preferential formation of PbO in air at 773K. Pb-Bi oxide and Bi
O
were formed after the enrichment of Bi in the alloys due to the Pb depletion. The oxidation rates of the alloys were much larger than that of the steels, and became larger with higher Pb concentration in the alloys. The compatibility of Pb-Bi alloys with stainless steel was worse when the Pb concentration in the alloys became low, since the dissolution type corrosion was promoted by the Bi composition in the alloy. The Pb-Li alloys were oxidized as they formed LiPbO and LiCO. Then, Li was depleted from the alloy.
Adhi, P. M.*; Okubo, Nariaki; Komatsu, Atsushi; Kondo, Masatoshi*; Takahashi, Minoru*
Energy Procedia, 131, p.420 - 427, 2017/12
Times Cited Count：0 Percentile：0.03(Energy & Fuels)The ionic conductivity of solid electrolyte may insufficient, and the sensor output signal will deviate from the theoretical one in low temperature. The performance of oxygen sensor with Ag/air reference electrode (RE) and liquid Bi/BiO RE was tested in low-temperature LBE at 300
450C and the charge transfer reactions impedance at the electrode-electrolyte interface was analyzed by electrochemical impedance analysis (EIS). After steady state condition, both of the sensors performed well and can be used at 300450C. Bi/Bi/BiO RE has lower impedance than Ag/air RE. Therefore, the response time of the oxygen sensor with Bi/Bi/BiO RE is faster than the oxygen sensor with Ag/air RE in the low-temperature region.
Ono, Masato; Shimizu, Atsushi; Kondo, Makoto; Shimazaki, Yosuke; Shinohara, Masanori; Tochio, Daisuke; Iigaki, Kazuhiko; Nakagawa, Shigeaki; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 2(4), p.044502_1 - 044502_4, 2016/10
In the loss of forced core cooling test using High Temperature engineering Test Reactor (HTTR), the forced cooling of reactor core is stopped without inserting control rods into the core and cooling by Vessel Cooling System (VCS) to verify safety evaluation codes to investigate the inherent safety of HTGR be secured by natural phenomena to make it possible to design a severe accident free reactor. The VCS passively removes the retained residual heat and the decay heat from the core via the reactor pressure vessel by natural convection and thermal radiation. In the test, the local temperature was supposed to exceed the limit from the viewpoint of long-term use at the uncovered water cooling tube by thermal reflectors in the VCS, although the safety of reactor is kept. Through a cold test, which was carried out by non-nuclear heat input from gas circulators with stopping water flow in the VCS, the local higher temperature position was specified although the temperature was sufficiently lower than the maximum allowable working temperature, and natural circulation of water had insufficient cooling effect on the temperature of water cooling tube below 1C. Then, a new safe and secured procedure for the loss of forced core cooling test was established, which will be carried out soon after the restart of HTTR.
Ono, Masato; Iigaki, Kazuhiko; Shimazaki, Yosuke; Shimizu, Atsushi; Inoi, Hiroyuki; Tochio, Daisuke; Hamamoto, Shimpei; Nishihara, Tetsuo; Takada, Shoji; Sawa, Kazuhiro; et al.
Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 12 Pages, 2016/06
On March 11th, 2011, the Great East Japan Earthquake of magnitude 9.0 occurred. When the great earthquake occurred, the HTTR had been stopped under the periodic inspection and maintenance of equipment and instrument. In the great earthquake, the maximum seismic acceleration observed at the HTTR exceeded the maximum value in seismic design. The visual inspection of HTTR facility was carried out for the seismic integrity conformation of HTTR. The seismic analysis was also carried out using the observed earthquake motion at HTTR site to confirm the integrity of HTTR. The concept of comprehensive integrity evaluation for the HTTR facility is divided into two parts. One is the inspection of equipment and instrument. The other is the seismic response analysis using the observed earthquake. For the basic inspections of equipment and instrument were performed for all them related to the operation of reactor. The integrity of the facilities is confirmed by comparing the inspection results or the numerical results with their evaluation criteria. As the result of inspection of equipment and instrument and seismic response analysis, it was judged that there was no problem to operate the reactor, because there was no damage and performance deterioration, which affects the reactor operation. The integrity of HTTR was also supported by the several operations without reactor power in cold conditions of HTTR in 2011, 2013 and 2015.
Nishiuchi, Mamiko*; Sakaki, Hironao*; Esirkepov, T. Zh.*; Nishio, Katsuhisa; Pikuz, T. A.*; Faenov, A. Ya.*; Skobelev, I. Yu.*; Orlandi, R.; Pirozhkov, A. S.*; Sagisaka, Akito*; et al.
Plasma Physics Reports, 42(4), p.327 - 337, 2016/04
Times Cited Count：13 Percentile：59.33(Physics, Fluids & Plasmas)A combination of a petawatt laser and nuclear physics techniques can crucially facilitate the measurement of exotic nuclei properties. With numerical simulations and laser-driven experiments we show prospects for the Laser-driven Exotic Nuclei extraction-acceleration method proposed in [M. Nishiuchi et al., Phys. Plasmas 22, 033107 (2015)]: a femtosecond petawatt laser, irradiating a target bombarded by an external ion beam, extracts from the target and accelerates to few GeV highly charged short-lived heavy exotic nuclei created in the target via nuclear reactions.
Kanasaki, Masato; Jinno, Satoshi*; Sakaki, Hironao; Kondo, Kiminori; Oda, Keiji*; Yamauchi, Tomoya*; Fukuda, Yuji
Plasma Physics and Controlled Fusion, 58(3), p.034013_1 - 034013_6, 2016/03
Times Cited Count：23 Percentile：77.87(Physics, Fluids & Plasmas)In order to understand the synergetic interplay between the Coulomb explosion of clusters and the background gas dynamics, we have conducted ion acceleration experiments using CO
clusters (250 nm in dia.) embedded in background H gas with the J-KAREN laser (1 J, 40 fs, 10
contrast) at JAEA-KPSI. By a careful analysis of etch pit positions on CR-39 and their structures including the etch pit growth behavior analysis with the multi-step etching technique, energy spectra for protons from the background gas and carbon/oxygen ions from the clusters are obtained separately. The maximum energies of protons and carbon/oxygen ions are determined as 1.6 MeV and 1.1 MeV/u, respectively. Based on the experimental results, the acceleration mechanism of the background gas ions induced by Coulomb explosion of clusters is discussed with the help from numerical simulations which employ a particle-in-cell (PIC) method including relaxation and ionization processes of plasma particles.
Yogo, Akifumi*; Bulanov, S. V.; Mori, Michiaki; Ogura, Koichi; Esirkepov, T. Z.; Pirozhkov, A. S.; Kanasaki, Masato*; Sakaki, Hironao; Fukuda, Yuji; Bolton, P.; et al.
Plasma Physics and Controlled Fusion, 58(2), p.025003_1 - 025003_7, 2016/02
Times Cited Count：9 Percentile：46.03(Physics, Fluids & Plasmas)Sakai, Hiroshi*; Enami, Kazuhiro*; Furuya, Takaaki*; Kako, Eiji*; Kondo, Yoshinari*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Sato, Masato*; Shinoe, Kenji*; et al.
Proceedings of 56th ICFA Advanced Beam Dynamics Workshop on Energy Recovery Linacs (ERL 2015) (Internet), p.63 - 66, 2015/12
no abstracts in English
Nishiuchi, Mamiko; Sakaki, Hironao; Esirkepov, T. Z.; Nishio, Katsuhisa; Pikuz, T. A.*; Faenov, A. Ya.*; Pirozhkov, A. S.; Sagisaka, Akito; Ogura, Koichi; Kanasaki, Masato; et al.
Research Using Extreme Light; Entering New Frontiers with Petawatt-Class Lasers II (Proceedings of SPIE, Vol.9515), p.95151D_1 - 95151D_4, 2015/06
Times Cited Count：0 Percentile：0(Engineering, Electrical & Electronic)Experimental demonstration of multi-charged heavy ion acceleration from the interaction between the ultra-intense short pulse laser system and the metal target is presented. The laser pulse of 
10 J laser energy, 36 fs pulse width, and the contrast level of 10
from 200 TW class Ti:sapphire J-KAREN laser system at JAEA is used in the experiment. Almost fully stripped Fe ions accelerated up to 0.9 GeV are demonstrated. This is achieved by the high intensity laser field of 10Wcm
interacting with the solid density target. The demonstrated iron ions with high charge to mass ratio (Q/M) is difficult to be achieved by the conventional heavy ion source technique in the accelerators.
Nishiuchi, Mamiko; Sakaki, Hironao; Esirkepov, T. Z.; Nishio, Katsuhisa; Pikuz, T.*; Faenov, A.*; Skobelev, I. Yu.*; Orlandi, R.; Sako, Hiroyuki; Pirozhkov, A. S.; et al.
Physics of Plasmas, 22(3), p.033107_1 - 033107_8, 2015/03
Times Cited Count：71 Percentile：96.85(Physics, Fluids & Plasmas)Almost fully stripped Fe ions accelerated up to 0.9 GeV are demonstrated with a 200 TW femtosecond high-intensity laser irradiating a micron-thick Al foil with Fe impurity on the surface. An energetic low-emittance high-density beam of heavy ions with a large charge-to-mass ratio can be obtained, which is useful for many applications, such as a compact radio isotope source in combination with conventional technology.
Kiriyama, Hiromitsu; Mori, Michiaki; Pirozhkov, A. S.; Ogura, Koichi; Sagisaka, Akito; Kon, Akira; Esirkepov, T. Z.; Hayashi, Yukio; Kotaki, Hideyuki; Kanasaki, Masato*; et al.
IEEE Journal of Selected Topics in Quantum Electronics, 21(1), p.1601118_1 - 1601118_18, 2015/01
Times Cited Count：60 Percentile：95.3(Engineering, Electrical & Electronic)This paper reviews the development of a high-contrast high-intensity petawatt-class Ti:sapphire chirped-pulse amplification (CPA) laser for research on high field science. We discuss in detail the design, performance and characterization of the laser. We also describe the on-going upgrade of the laser system and some applications for the laser in relativistic dominated laser-matter interactions.
Jinno, Satoshi; Fukuda, Yuji; Sakaki, Hironao; Yogo, Akifumi; Kanasaki, Masato; Kondo, Kiminori; Faenov, A. Y.; Skobelev, I. Yu.*; Pikuz, T.; Boldarev, A. S.*; et al.
Progress in Ultrafast Intense Laser Science XI; Springer Series in Chemical Physics, Vol.109, p.215 - 233, 2015/00
Clusters formed in supersonic gas expansion through a three-staged conical nozzle have been verified by measuring the angular distribution of the light scattered from cluster target. The size distirbutions of the clusters are calculated based on the Mie theory. The reliability of the size measurement is verified to be an experimental error of 10% using standard particles. The mean sizes of CO clusters for the cases of CO/H and CO/He mixed-gas targets are estimated to be 0.26 
m and 0.22 m, respectively. For the CO/H, the cluster density is estimated to be 5.5 
clusters/cm
by measuring the attenuation of the laser beam intensity. Furthermore, total gas density profiles are obtained via the Abel inversion from the phase shift of the light passing through the target using an interferometer. The variation of the cluster mass fraction along the radial direction of the target is almost constant, which is consistent with a Boldarev's model.
Someya, Yoji; Tobita, Kenji; Yanagihara, Satoshi*; Kondo, Masatoshi*; Uto, Hiroyasu; Asakura, Nobuyuki; Hoshino, Kazuo; Nakamura, Makoto; Sakamoto, Yoshiteru
Fusion Engineering and Design, 89(9-10), p.2033 - 2037, 2014/10
Times Cited Count：9 Percentile：57.19(Nuclear Science & Technology)In the replacement period of a fusion power reactor, the assembly of blanket or divertor modules need to be removed from the reactor in order to minimize remote maintenance in the vacuum vessel and to attain a reasonable plant availability. In the hot cell, the modules will be removed from the backplate of the assembly. Here, note that the active cooling must be done by a way that does not cause contamination of the hot cell environment due to dispersion of tritium and tungsten dust. In this sense, the cooling scenario is adopted that the existing pipe of cooling water in the assembly is connected to a different cooling water system in the hot cell. In this scenario, the temperature of the assembly is maintained about 40-100C. On the other hand, the structural material (RAFM) of the blanket and divertor is not recycled due to its high contact dose rate. It should be crushed into small pieces to reduce volume of the waste and required storage space. Here, the decay heat must be removed by natural convection to keep the temperature below 65C for preventing water evaporation from the mortar. The RAFM is kept in the interim storage during 12 years until the required temperature conditions for mortar are ensured and then is disposed of.
Oguri, Hidetomo; Hasegawa, Kazuo; Ito, Takashi; Chishiro, Etsuji; Hirano, Koichiro; Morishita, Takatoshi; Shinozaki, Shinichi; Ao, Hiroyuki; Okoshi, Kiyonori; Kondo, Yasuhiro; et al.
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.389 - 393, 2014/10
no abstracts in English
Kondo, Masato*; Tsubouchi, Masaaki
Optics Express (Internet), 22(12), p.14135 - 14147, 2014/06
Times Cited Count：18 Percentile：66.56(Optics)We investigated liquid-sheet jets with controllable thickness for application to terahertz (THz) spectroscopy. Slit-type and colliding-jet nozzles were used to generate optically flat liquid jets. The thickness of the liquid sheet was determined precisely by spectral interference and THz time-domain-spectroscopy methods. By adjusting the collision angle of the colliding-jet nozzle, we could control the thickness of the liquid sheet from 50 to 120 m.
