Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kajimoto, Ryoichi; Nakamura, Mitsutaka; Inamura, Yasuhiro; Kamazawa, Kazuya*; Ikeuchi, Kazuhiko*; Iida, Kazuki*; Ishikado, Motoyuki*; Murai, Naoki; Kira, Hiroshi*; Nakatani, Takeshi; et al.
Journal of Physics; Conference Series, 1021(1), p.012030_1 - 012030_6, 2018/06
Times Cited Count：3 Percentile：88.67(Nuclear Science & Technology)Sawamura, Masaru; Hajima, Ryoichi; Kubo, Takayuki*; Saeki, Takayuki*; Iwashita, Yoshihisa*; Tongu, Hiromu*; Hokonohara, Hisao*; Cenni, E.*
Proceedings of 17th International Conference on RF Superconductivity (SRF 2015) (Internet), p.1196 - 1199, 2015/12
The spoke cavity is expected to have advantages for compact ERL accelerator for X-ray source based on laser Compton scattering. We have been developing the spoke cavity under a research program of MEXT, Japan to establish the fabrication process. Since our designed shape of the spoke cavity is complicated due to increase the RF properties, we have been designing the mold including the process of press work and the support parts for vacuum tolerance with the mechanical simulation. In this paper we present status of the spoke cavity fabrication.
Sawamura, Masaru; Hajima, Ryoichi; Nishimori, Nobuyuki; Nagai, Ryoji; Iwashita, Yoshihisa*; Tongu, Hiromu*; Kubo, Takayuki*; Saeki, Takayuki*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.583 - 586, 2015/09
no abstracts in English
Hajima, Ryoichi; Sawamura, Masaru; Kubo, Takayuki*; Saeki, Takayuki*; Cenni, E.*; Iwashita, Yoshihisa*; Tongu, Hiromu*
Proceedings of 6th International Particle Accelerator Conference (IPAC '15) (Internet), p.2902 - 2904, 2015/06
A 5-year research program on the development of superconducting spoke cavities for electron accelerators has been funded by MEXT, Japan since 2013. The purpose of our program is establishing design and fabrication processes of superconducting spoke cavity optimized for compact X-ray sources based on laser Compton scattering. The spoke cavity is expected to realize a compact industrial-use X-ray source with a reasonable cost and easy operation. We have chosen a cavity frequency at 325 MHz due to possible operation at 4 K and carried out cavity shape optimization in terms of electromagnetic and mechanical properties. Production of press-forming dies is also in progress. In this paper, we present overview and up-to-date status of the research program.
Kubo, Takayuki*; Saeki, Takayuki*; Cenni, E.*; Iwashita, Yoshihisa*; Tongu, Hiromu*; Hajima, Ryoichi; Sawamura, Masaru
Proceedings of 6th International Particle Accelerator Conference (IPAC '15) (Internet), p.2892 - 2894, 2015/06
no abstracts in English
Kubo, Takayuki*; Saeki, Takayuki*; Cenni, E.*; Fujisawa, Hiroshi*; Iwashita, Yoshihisa*; Tongu, Hiromu*; Hajima, Ryoichi; Sawamura, Masaru
Proceedings of 27th International Linear Accelerator Conference (LINAC 2014) (Internet), p.1030 - 1033, 2014/12
A 325 MHz superconducting spoke cavity for the electron acceleration is under development to realize a compact industrial-use X-ray source with the laser-Compton scattering. Optimum designs of the spoke cavity have been searched by using the genetic algorithm, and multipactor simulations are currently in progress to finalize the detailed design. In parallel to the design-optimization efforts, studies toward fabrication processes are also being carried out. In this paper, progresses made so far and a current situation are briefly reviewed.
Sawamura, Masaru; Nagai, Ryoji; Nishimori, Nobuyuki; Hajima, Ryoichi; Iwashita, Yoshihisa*; Fujisawa, Hiroshi*; Tongu, Hiromu*; Kubo, Takayuki*; Saeki, Takayuki*
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.618 - 620, 2014/10
no abstracts in English
Sawamura, Masaru; Hajima, Ryoichi; Nagai, Ryoji; Kubo, Takayuki*; Fujisawa, Hiroshi*; Iwashita, Yoshihisa*; Tongu, Hiromu*
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.1946 - 1948, 2014/07
We have launched a 5-year research program to develop superconducting spoke cavity for laser Compton scattered (LCS) photon sources. For realizing a wide use of LCS X-ray and 
-ray sources in academic and industrial applications, we adopt 325-MHz super-conducting spoke cavity to electron beam drivers. The spoke cavity, originally invented for ion and proton acceleration, can be used for electron accelerators, in which we can make best use of features of spoke cavity: relative compactness in comparison with a TM cavity of the same frequency, robustness with respect to manufacturing inaccuracy due to its strong cell-to-cell coupling, couplers on outer conductor for the better packing in a linac, and so on. In this paper, we present our research plan and results of cavity shape optimization.
Iwashita, Yoshihisa*; Fujisawa, Hiroshi*; Tongu, Hiromu*; Hajima, Ryoichi; Nagai, Ryoji; Sawamura, Masaru; Kubo, Takayuki*
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.2543 - 2545, 2014/07
Superconducting spoke cavities for laser Compton scattered (LCS) photon sources is under development. The operating frequency is 325-MHz to accelerate electron beam for the LCS sources, where the size of the spoke cavity is less than an elliptical cavities with the same frequency. Because of the complicated shape of the cavity, it may be suffered from a strong multipactor effect. Some trial of multipactor analysis is described.
Okubo, Seisuke*; Fukui, Katsunori*; Hashiba, Kimihiro*; Hikima, Ryoichi; Tanno, Takeo; Sanada, Hiroyuki; Matsui, Hiroya; Sato, Toshinori
JAEA-Research 2011-040, 54 Pages, 2012/02
JAEA-Research-2011-040.pdf:2.85MB
With respect to high-level radioactive waste disposal, knowledge of the long-term mechanical stability of shafts and galleries excavated in rock are required, not only during construction and operation but also over a period of thousands of years after closure. Therefore, it is very important to understand the time-dependent behavior of rock for evaluating long-term mechanical stability. This report describes the results of the activities in FY2010. In Chapter 1, we provide an overview and the background to this study. In Chapter 2, the results of a long-term creep test on Tage tuff, started in FY1997 are described. In Chapter 3, the relation of loading-rate dependency of strength and stress dependency of creep life, the relationship of time dependency and probability distribution of strength or creep life and size effects are discussed to indicate more clearly the meaning of the value of "n" to express the degree of time dependency of the rock. In Chapter 4, failure criterions of a rock mass considering time dependency are discussed. In Chapter 5, the FEM analysis implemented with a generalized variable-compliance-type constitutive equation considering the change of "n" in confining pressure and strength distribution of rock mass carried out to clarify the long-term behavior of Toki granite is described. Finally, based on the numerical analysis, an in situ testing method is proposed.
Okubo, Seisuke*; Hikima, Ryoichi; Hirano, Toru*; Matsui, Hiroya
JAEA-Research 2010-031, 45 Pages, 2010/10
JAEA-Research-2010-031.pdf:1.22MB
Rock shows time-dependent behavior such as creep/relaxation. With respect to high-level radioactive waste disposal, knowledge of the long-term mechanical stability of shafts and galleries excavated in rock are required, not only during construction and operation but also over a period of thousands of years after closure. Therefore, it is very important to understand the time-dependent behavior of rock for evaluating long-term mechanical stability. The purpose of this study is determining the mechanisms of time-dependent behavior of rock by the precise test, observation and measurement, to develop methods for evaluating long-term mechanical stability. In previous work, testing techniques have been established and basic evaluation methods were developed. Recently, some parameters needed for simulation of time-dependent behavior were determined at the Mizunami underground research facilities. However, we did not have enough data to check on the reliability of the evaluation method for these parameters. This report describes the results of the activities in fiscal year 2009. In Chapter 1, we provide an overview and the background to this study. In Chapter 2, the results of the long-term creep test on Tage tuff, started in fiscal year, 1997 are described. In Chapter 3, methods for obtaining parameters of the constitutive equation for rock are reviewed and summarized. The time dependent behavior of Toki granite and Inada granite (40-80 
C) are also summarized based on data obtained prior to the previous fiscal year. In Chapter 4, the FEM analysis implemented with a generalized variable-compliance-type constitutive equation carried out to clarify the long-term behavior of Toki granite is described. Finally, based on the numerical analysis, an in situ testing method is proposed.
Yamamoto, Masahiro*; Uchiyama, Takashi*; Miyajima, Tsukasa*; Honda, Yosuke*; Sato, Kotaro*; Matsuba, Shunya*; Saito, Yoshio*; Kobayashi, Masanori*; Kurisu, Hiriki*; Hajima, Ryoichi; et al.
Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.717 - 720, 2010/08
A 500-kV photocathode DC electron gun which can supply the beam of a low emittance and a high average current has been developed in collaboration with KEK, JAEA, Hiroshima Univ., Nagoya Univ. and Yamaguchi Univ. The vacuum of the gun chamber has to be lower Extreme High Vacuum for maintain cathode-life time. A titanium chamber and new material of ceramic were employed to reduce outgassing rate. The result of outgassing rate of the gun chamber is described in this report.
Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Uchiyama, Takashi*; Kobayashi, Masanori*; Muto, Toshiya*; Matsuba, Shunya*; Sakanaka, Shogo*; Sato, Kotaro*; Saito, Yoshio*; et al.
Proceedings of 6th Annual Meeting of Particle Accelerator Society of Japan (CD-ROM), p.860 - 862, 2009/08
A newly 500 kV electron gun (2nd - 500 kV gun) for an ERL light source is designed at KEK. A new concept and state of-the-art technologies of vacuum system, ceramic insulators, high voltage power supply, photocathode and preparation system will be employed. The details are described in this report.
crystalAkahane, Yutaka; Aoyama, Makoto; Sugiyama, Akira; Kubo, Ryoichi; Ogawa, Kanade; Tsuji, Koichi; Yamakawa, Koichi
Optics Letters, 33(5), p.494 - 496, 2008/03
Times Cited Count：2 Percentile：14.69(Optics)A diode-pumped, cryogenically-cooled Yb:LuLiF regenerative amplifier has been developed for the first time to our knowledge. A chirped-seed pulse was amplified and compressed in the regenerative amplifier, simultaneously, which generated 
6-mJ, 13-ps pulses at 999 nm wavelength without a pulse compressor. Simultaneous lasing at 999 nm and 1024 nm, respectively, was demonstrated, which could be used for different frequency generation in the THz region.
Otsuki, Ryusei*; Nasu, Shoichi*; Fujimori, Ryosuke*; Anada, Kinji*; Ohashi, Kentaro*; Yamamoto, Ryoichi*; Fujii, Kimio; Okubo, Keisuke*
Funtai Oyobi Fummatsu Yakin, 51(8), p.622 - 625, 2004/08
Effects of carbon materials on weight yield of (C
+C
) and weight ratios of C to (C+C) in soot were examined by the Joule resistive heating of four kinds of carbon materials at He gas pressures from 0.7
10
8.010Pa for collector radii of 45, 50 and 55mm. The yields were in the range of 1 to 8% for graphite with hexagonal lattice, and better than those for glassy carbon. The most effective He gas pressure for the fullerene yield were in the range of 4.05.310Pa. Any collector radii dependence of the yields was not observed. The weight ratios of C to (C+C) were about 60 to 70%, and showed neither He gas pressure depenndennce nor collector radii depenndence four kinds of carbon materials.
Otsuki, Ryusei*; Nasu, Shoichi*; Ohashi, Kentaro*; Yamamoto, Ryoichi*; Fujii, Kimio; Okubo, Keisuke*
Funtai Oyobi Fummatsu Yakin, 51(8), p.626 - 629, 2004/08
The He, Ar and the Penning gas pressureeffects on the preparation yieldsof the fullerenes were investigated by means of the arc discharge method using graphite(PGX) anode buried in a tungsten rod and tungsten cathode for collector radii of 50mm. The maximum yield showed about 13-14 % at 67KPa in He gas. The yields in the mixtures of He and Ne gases (the Penning effect) were similar to those obtained in He gas. Weight ratios of C to (C+C) were about 20% in Ar gas, while those in He and Penning gas were about 60%. Ultra sonic vibration was effective to separate C from soot.
Saito, Shinzo; Tanaka, Toshiyuki; Sudo, Yukio; Baba, Osamu; Shindo, Masami; Shiozawa, Shusaku; Mogi, Haruyoshi; Okubo, Minoru; Ito, Noboru; Shindo, Ryuichi; et al.
JAERI 1332, 247 Pages, 1994/09
no abstracts in English
Akahane, Yutaka; Aoyama, Makoto; Sugiyama, Akira; Kubo, Ryoichi; Ogawa, Kanade; Tsuji, Koichi; Yamakawa, Koichi
no journal, ,
A diode-pumped, cryogenically-cooled Yb
:LuLiF regenerative amplifier has been developed for the first time to our knowledge, which generated 6-mJ, 13-ps pulses at 999 nm wavelength without a pulse compressor.
:LuLiF crystalAkahane, Yutaka; Aoyama, Makoto; Kubo, Ryoichi; Sugiyama, Akira; Ogawa, Kanade; Tsuji, Koichi; Yamakawa, Koichi
no journal, ,
A diode-pumped, cryogenically-cooled Yb:LuLiF regenerative amplifier has been developed for the first time to our knowledge, which generated 6-mJ, 13-ps pulses at 999 nm wavelength without a pulse compressor.
Akahane, Yutaka; Aoyama, Makoto; Sugiyama, Akira; Kubo, Ryoichi; Tsuji, Koichi; Ogawa, Kanade; Yamakawa, Koichi
no journal, ,
We have developed a diode-pumped, cryogenically-cooled Yb:LuLiF regenerative amplifier, for the first time to our knowledge, which amplified 999 and 1024 nm chirped seed pulse to 6 and 8.5 mJ, respectively. Durations of amplified laser pulses in the regen were compressed to 13.2 ps and 27.4 ps in 999 and 1024 nm amplification, respectively, by gain-narrowing of chirped pulses, which enables us to apply output laser pulses to nonlinear applications directly without additional pulse compressor. We have also demonstrated simultaneous two-color lasing at 999 nm and 1024 nm, which could be used for different frequency generation in the THz region.
