Enhancement of the methodology of repository design and post-closure performance assessment for preliminary investigation stage, 3; Progress report on NUMO-JAEA collaborative research in FY2013 (Joint research)

Shibata, Masahiro; Sawada, Atsushi; Tachi, Yukio; Makino, Hitoshi; Wakasugi, Keiichiro; Mitsui, Seiichiro; Kitamura, Akira; Yoshikawa, Hideki; Oda, Chie; Ishidera, Takamitsu; et al.

JAEA-Research 2014-030, 457 Pages, 2015/03

JAEA-Research-2014-030.pdf:199.23MB

JAEA and NUMO have conducted a collaborative research work which is designed to enhance the methodology of repository design and post-closure performance assessment in preliminary investigation stage. With regard to (1) study on rock suitability in terms of hydrology, based on some examples of developing method of hydro-geological structure model, acquired knowledge are arranged using the tree diagram, and model uncertainty and its influence on the evaluation items were discussed. With regard to (2) study on scenario development, the developed approach for "defining conditions" has been reevaluated and improved from practical viewpoints. In addition, the uncertainty evaluation for the effect of use of cementitious material, as well as glass dissolution model, was conducted with analytical evaluation. With regard to (3) study on setting radionuclide migration parameters, based on survey of precedent procedures, multiple-approach for distribution coefficient of rocks was established, and the adequacy of the approach was confirmed though its application to sedimentary rock and granitic rock. Besides, an approach for solubility setting was developed including the procedure of selection of solubility limiting solid phase. The adequacy of the approach was confirmed though its application to key radionuclides.

Single crystal growth and transport properties of RRuAl (R = La and Pr)

Sakoda, Masahito*; Kubota, Kazuhiro*; Tanaka, Shuhei*; Matsuoka, Eiichi*; Sugawara, Hitoshi*; Matsuda, Tatsuma; Haga, Yoshinori

Journal of the Physical Society of Japan, 81(Suppl.B), p.SB011_1 - SB011_4, 2012/12

https://doi.org/10.1143/JPSJS.81SB.SB011

Current status of the control system for J-PARC accelerator complex

Yoshikawa, Hiroshi; Sakaki, Hironao; Sako, Hiroyuki; Takahashi, Hiroki; Shen, G.; Kato, Yuko; Ito, Yuichi; Ikeda, Hiroshi*; Ishiyama, Tatsuya*; Tsuchiya, Hitoshi*; et al.

Proceedings of International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS '07) (CD-ROM), p.62 - 64, 2007/10

J-PARC is a large scale facility of the proton accelerators for the multi-purpose of scientific researches in Japan. This facility consists of three accelerators and three experimental stations. Now, J-PARC is under construction, and LINAC is operated for one year, 3GeV synchrotron has just started the commissioning in this October the 1st. The completion of this facility will be next summer. The control system of accelerators established fundamental performance for the initial commissioning. The most important requirement to the control system of this facility is to minimize the activation of accelerator devices. In this paper, we show that the performances of each layer of this control system have been achieved in the initial stage.

Comparative study on the preparation and properties of radiation-grafted polymer electrolyte membranes based on fluoropolymer films

Chen, J.; Septiani, U.*; Asano, Masaharu; Maekawa, Yasunari; Kubota, Hitoshi*; Yoshida, Masaru

Journal of Applied Polymer Science, 103(3), p.1966 - 1972, 2007/03

https://doi.org/10.1002/app.24950

In this study, ETFE and PVDF films, together with the crosslinked PTFE (cPTFE) films have been compared on the basis of their preparation and properties of radiation-grafted polymer electrolyte membranes (PEM). The proton conductivity and chemical stability of the three types of membranes with the similar ion exchange capacity near 1.0 mmolg were investigated and discussed in detail. Although the ETFE-based PEM was relatively more stable, its proton conductivity was lower than those of the PVDF- and cPTFE-based membranes. On the other hand, the cPTFE-based membrane showed the significantly higher proton conductivity, but its chemical stability was shorter than that of the ETFE-based membrane. The difference in the preparation and properties of the PEMs was due to the difference in the crystallinity and intrinsic properties of the base films.

Influence of pre-irradiation atmosphere on the properties of polymer electrolyte membranes prepared using radiation grafting method

Septiani, U.*; Chen, J.; Asano, Masaharu; Maekawa, Yasunari; Yoshida, Masaru; Kubota, Hitoshi*

Journal of Materials Science, 42(4), p.1330 - 1335, 2007/02

https://doi.org/10.1007/s10853-006-1196-z

The influence of pre-irradiation atmosphere, argon and air, on radiation grafting of styrene into poly(ethylene-co-tetrafluoroethylene) (ETFE) films and the properties of the ETFE-based radiation-grafted polymer electrolyte membranes were investigated. The preparation and properties of the membranes were found to be strongly influenced by the -ray pre-irradiation atmosphere. The proton conductivity was measured in its water-saturated state at 25C, and the membrane durability was tested in a 3 % HO aqueous solution at 60C. The proton conductivity of the membrane prepared by pre-irradiation under air was higher than that of the membrane prepared under argon with the same ion exchange capacity level. However, the durability of the former was considerably lower than that of the latter. For instance, the membrane with an ion exchange capacity of about 1.0 mmolg-1 prepared under argon was twice as durable as that prepared under air. It was considered that the lower durability of the membrane prepared by pre-irradiation under air was because of the unstable ether bond introduced between the graft chains and the backbone chains. : polymer electrolyte membrane (PEM); radiation grafting; styrene; durability; ETFE

Nano-structure controlled polymer electrolyte membranes for fuel cell applications prepared by ion beam irradiation

Yamaki, Tetsuya; Kozone, Yuichi; Hiroki, Akihiro; Asano, Masaharu; Kubota, Hitoshi*; Yoshida, Masaru

ECS Transactions, 3(1), p.103 - 112, 2006/00

https://doi.org/10.1149/1.2356129

Fluoropolymer-based electrolyte membranes for water electrolyzers and fuel cells were prepared by using heavy ion beams from the cyclotron accelerator. The preparation method for these so-called "nano-scale structure-controlled membranes" involves (1) the swift heavy ion irradiation of polyvinylidene fluoride films and subsequent chemical etching to obtain cylindrical pores with a diameter of 100 nm, and (2) the filling of proton-conducting polymer chains into the etched pores by -ray-induced graft polymerization. The proton transport only in the thickness direction was observed for the resulting membranes with controlled ion exchange capacities, indicating the formation of one-dimensional straight proton-conducting pathways parallel to the ion-beam incident axis. The membranes exhibited a lower water uptake and reduced methanol permeability compared to commercially-available Nafion probably due to the restricted structures.

Polytetrafluoroethylene-based proton-conducting membranes prepared by ultraviolet-induced photografting

Chen, J.; Asano, Masaharu; Maekawa, Yasunari; Sakamura, Takahiro*; Kubota, Hitoshi*; Yoshida, Masaru

Electrochemical and Solid-State Letters, 9(11), p.G326 - G329, 2006/00

https://doi.org/10.1149/1.2344827

A novel process comprising UV-induced photografting of styrene into PTFE films and subsequent sulfonation has been developed for preparing proton-conducting membranes. The significance of this process is that the graft chains can penetrate throughout the PTFE base films; the resultant sulfonated electrolyte membrane with a low degree of grafting near 7% shows higher proton conductibility and better mechanical properties, similar to those of Nafion membrane. Furthermore, the performances of the UV-photografted electrolyte membranes are better as compared to those of the radiation grafted electrolyte membranes.

Preparation of proton exchange membranes based on crosslinked polytetrafluoroethylene for fuel cell applications

Yamaki, Tetsuya; Kobayashi, Kazuhiro; Asano, Masaharu; Kubota, Hitoshi*; Yoshida, Masaru

Polymer, 45(19), p.6569 - 6573, 2004/09

https://doi.org/10.1016/j.polymer.2004.07.048

We prepared proton exchange membranes by the -ray-induced post grafting of styrene into crosslinked polytetrafluoroethylene (PTFE) films and subsequent sulfonation. The degree of grafting was controlled in the range of 7-75% by the crosslinking density of the PTFE matrix as well as the grafting conditions. Under our preparation conditions, the films at the grafting yield of 30% were found to produce ion exchange membranes with a homogeneous distribution of sulfonic acid groups. The resulting membranes showed a large ion exchange capacity up to 2.9 meq g, which exceeded the performance of commercially-available perfluorosulfonic acid films such as Nafion; nevertheless, they appeared to be dimensionally stable in water. These should undoubtedly result from the use of the crosslinked PTFE films as graft substrates and make our ion exchange membranes promising for applications to polymer electrolyte fuel cells.

Preparation of crosslinked fluoropolymer electrolyte membranes for use in fuel cells and then investigated their structural properties

Inoue, Yutaka; Kobayashi, Kazuhiro; Yamaki, Tetsuya; Asano, Masaharu; Kubota, Hitoshi*; Yoshida, Masaru

Dai-2-Kai 21-Seiki Rengo Shimpojiumu; Kagaku Gijutsu To Ningen Rombunshu, p.257 - 260, 2003/00

We prepared crosslinked fluoropolymer electrolyte membranes for use in fuel cells and then investigated their structural properties by X-ray diffraction (XRD) analysis. The radiation-induced grafting of styrene into crosslinked polytetrafluoroethylene (PTFE) films and subsequent sulfonation enabled us to obtain the electrolyte membrane with a sufficient ion exchange capacity, which exceeds that of the commercially-available film, Nafion. As the crosslinking and styrene grafting reactions proceeded, the size of the PTFE crystallites in the film became smaller, thereby decreasing the film crystallinity. Interestingly, in contrast to Nafion, the resulting sulfonated membranes were found to have high crystallinity.

Simultaneously occurring process of radiation-induced polymerization, crosslinking, and degradation of N-isopropylacrylamide

Yoshida, Masaru; *; Asano, Masaharu; Suwa, Takeshi; Kubota, Hitoshi*; Katakai, Ryoichi*

J. Polym. Sci., Part A, 35, p.3075 - 3077, 1997/00

no abstracts in English