Estimating fine melt pool, coarse melt pool, and heat affected zone effects on the strengths of additive manufactured AlSi10Mg alloys

Lam, T.-N.*; Lee, A.*; Chiu, Y.-R.*; Kuo, H.-F.*; 川崎 卓郎; Harjo, S.; Jain, J.*; Lee, S. Y.*; Huang, E.-W.*

Materials Science & Engineering A, 856, p.143961_1 - 143961_9, 2022/10

https://doi.org/10.1016/j.msea.2022.143961

Fine melt pool (FMP), coarse melt pool (CMP), and heat affected zone (HAZ) are generally observed in the additive manufactured AlSi10Mg alloys. In this study, we demonstrated that the yield strength can be estimated by the combination of the sizes and volume fractions of FMP, CMP, HAZ together with the second-phase hardening. Two different AlSi10Mg alloys fabricated via powder bed fusion (PBF) process were prepared to examine the lattice strain evolution of constituent phases during uniaxial tensile loading via in-situ neutron diffraction measurements. The horizontally-built (Hz-built) exhibited a much better yield and tensile strength as well as elongation compared to the vertically-built (Vt-built) AlSi10Mg alloy. We reported empirical strength quantification based on the sizes and ratios of fine melt pool (FMP), coarse melt pool (CMP), and heat affected zone (HAZ) together with the possible failure mode to prevent early fracture in the additive manufactured alloys.