Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Glazyrin, K.*; Spektor, K.*; Bykov, M.*; Carvalho, P. H. B.*; Dong, W.*; K
rmann, F.*; 佐野 亜沙美; 服部 高典; Beyer, D. C.*; Sahlberg, M.*; et al.
Nature Communications (Internet), 17, p.2622_1 - 2622_10, 2026/03
被引用回数：0 パーセンタイル：0.00高エントロピー材料の研究は様々な科学分野に貢献し、応用面で興味深い特性を次々と明らかにしている。本研究では、高温高圧下におけるX線・中性子飛行時間法実験および第一原理計算により、カンター合金(CoCrFeNiMn)の水素抵抗性を調査した。我々は、カンター合金組成に基づく面心立方(fcc)型水素化物の形成を報告する。さらに、水素含有量の推定を含むその特性評価を提供する。これらの知見は、高エントロピー合金および高エントロピー水素化物の複雑な化学に関する知見の蓄積に貢献するものである。
Rossi, F.; Lee, J.; 吉見 優希*; 芝 知宙; 寺田 和司*; 堀 順一*
第46回日本核物質管理学会年次大会会議論文集(インターネット), 4 Pages, 2025/12
The Japan Atomic Energy Agency is developing a non-destructive system to detect fissile nuclear materials within a sample combining resonance analysis from prompt fission neutrons, capture gamma-rays, and transmitted neutrons. The detection setup includes an array of plastic scintillators at the sample and a downstream 
Li scintillator. Recent improvements focus on better neutron/gamma discrimination using advanced EJ-276D plastic scintillators and optimized pulse shape discrimination analysis. Tests were conducted at the Kyoto University time-of-flight facility with natural and enriched uranium samples. This paper presents the latest design updates and experimental results from the system's development. This work is supported by MEXT under the subsidy for the "promotion for strengthening nuclear security and the like".
Rossi, F.; Lee, J.; 吉見 優希*; 弘中 浩太; 小泉 光生; 芝 知宙; 寺田 和司*; 堀 順一*
ESARDA Bulletin (Internet), 67, p.59 - 67, 2025/12
ISCN is developing an advanced neutron resonance analysis system for the identification and quantification of fissile materials. This system integrates three complementary techniques: NRTA, NRCA, and NRFNA, enabling simultaneous detection and improving sensitivity for fissile material identification. To evaluate the system's performance, we conducted a series of experiments using natural uranium samples with a thickness from 1.5 to 6.0 mm enclosed in a 2 cm thick box made of lead. The results show that even if the presence of lead generates significant background noise due to neutron scattering and reflection, a clear identification of 
U signatures is possible. These findings highlight the system's versatility and effectiveness in shielding scenarios, offering a promising tool for nuclear security and nonproliferation applications. By enabling concurrent measurements, the system improves accuracy and provides an innovative method for enhancing regulatory and safeguard efforts in the nuclear industry. This work is supported by MEXT under the subsidy for the "promotion for strengthening nuclear security and the like".
/graphene/yttrium iron garnet quadruple heterostructuresChoi, J. W.*; 吉川 貴史; Lee, S.-K.*; 他13名*
Journal of Materials Chemistry A, 13(32), p.26690 - 26699, 2025/08
Strong spin-orbit coupling (SOC) materials and graphene have recently emerged as promising interfacial layers for tailoring spin transport in normal metal/ferromagnet heterostructures. However, spin-to-charge conversion in Pt/two-dimensional (2D) layer/graphene/yttrium iron garnet (YIG) heterostructures remains experimentally unexplored. This study investigates the effects of monolayer graphene and its interfacial coupling with a non-magnetic 2D transition metal dichalcogenide (TMDC) with relatively strong SOC on the longitudinal spin Seebeck effect (LSSE) in Pt/TiSe (or ZrSe)/graphene/YIG quadruple heterostructures. Interfacial SOC between TMDC and graphene is demonstrated to induce an additional spin-to-charge conversion channel in the Pt layer, generating a charge current opposite in direction to the conventional inverse spin Hall effect-induced current from YIG and thereby leading to a net suppression of the LSSE signal. Thus, the study highlights the potential of non-magnetic TMDC interlayers for modulating spin transport, offering new design pathways for spintronic devices.
Kim, Y. S.*; Kang, T.*; Hong, S.-K.*; Brechtl, J.*; Lebyodkin, M.*; Cheng, Y.-H.*; Huang, E.-W.*; Liaw, P. K.*; Harjo, S.; Gong, W.; et al.
Acta Materialia, 292, p.120970_1 - 120970_16, 2025/06
被引用回数：8 パーセンタイル：91.94(Materials Science, Multidisciplinary)Metallic materials can exhibit low-temperature serrated deformation (LTSD) at cryogenic temperatures, potentially causing sudden failures. Understanding LTSD is thus crucial for ensuring material reliability in such environments. LTSD has been explained by two main mechanisms: (i) dislocation-based mechanical instability and (ii) thermomechanical instability, but each has limitations when considered alone. To address this, we propose a new LTSD mechanism, a thermally induced dislocation dynamics model, based on cryogenic experimental evidence. This model accounts for dislocation avalanches and localized heating, leading to hierarchical dislocation networks and transitions in deformation modes. A modified deformation-mechanism map for SS316L is also presented. Our findings highlight the rate-dependent nature of LTSD and negative strain-rate sensitivity, including the first observation of links between small stress fluctuations and large serrations.
Kim, M.*; Lee, C.*; 杉田 裕; Kim, J.-S.*; Jeon, M.-K.*
Geomechanics for Energy and the Environment, 41, p.100628_1 - 100628_9, 2025/03
被引用回数：1 パーセンタイル：45.01(Energy & Fuels)この研究では、DECOVALEX-2023プロジェクトの一環として幌延の地下研究施設で実施された実規模大の人工バリア試験の数値解析を使用して、非等温二相流のモデリングに対する主要変数の選択の影響を調査した。検証済みの数値モデルを使用して、人工バリアシステム内の不均質多孔質媒体の熱-水連成挙動を解析した。支配方程式を離散化する際の2つの異なる主要変数スキームを比較したところ、結果に大きな違いがあることが明らかになった。
Lee, J.; Rossi, F.; 児玉 有; 弘中 浩太; 小泉 光生; 佐野 忠史*; 松尾 泰典*; 堀 順一*
Annals of Nuclear Energy, 211, p.111017_1 - 111017_7, 2025/02
被引用回数：1 パーセンタイル：23.55(Nuclear Science & Technology)Silica glass has been used as a base and host material in vitrified radioactive waste and lithium glass scintillator for neutron detection because of its superb transparency, high heat resistance, and excellent chemical inertness. Therefore, an accurate total cross section of the silica glass is important to evaluate the criticality safety for the vitrified wastes and to understand the neutron response for lithium glass scintillators accurately. In the present study, to provide the accurate total cross section in the thermal and epithermal energy range, the neutron transmission measurements were carried out by a pulsed neutron beam with the time-of-flight method at the Kyoto University Institute for Integrated Radiation and Nuclear Science - Linear Accelerator. We obtained the neutron total cross section of the silica glass in the energy region from 0.002 eV to 25 eV. The obtained results were compared and discussed with the previous results and the evaluated data.
小泉 光生; 伊藤 史哲*; Lee, J.; 弘中 浩太; 高橋 時音; 鈴木 敏*; 有川 安信*; 安部 勇輝*; Wei, T.*; 余語 覚文*; et al.
第45回日本核物質管理学会年次大会会議論文集(インターネット), 4 Pages, 2024/11
Neutron resonance transmission analysis (NRTA) is a non-destructive method applicable for measuring nuclear material using a time-of-flight (TOF) technique with a pulsed neutron source. To realize a high resolution compact NRTA system, use of a short-pulsed neutron source is essential. Laser-driven neutron sources (LDNSs) are well-suit for generating such neutron beams due to their short pulse width. The advances in laser technology will further reduce the system's size and improve practicality. In this study, we demonstrate the measurement of a neutron transmission TOF spectrum of a sample containing indium and silver using the LDNS of the Osaka University. The obtained spectrum was analyzed using the least-square nuclear-resonance fitting program, REFIT, showcasing for the first time the potential of an LDNS for nondestructive areal-density material characterization.
小泉 光生; 伊藤 史哲*; Lee, J.; 弘中 浩太; 高橋 時音; 鈴木 敏*; 有川 安信*; 安部 勇輝*; Lan, Z.*; Wei, T.*; et al.
Scientific Reports (Internet), 14, p.21916_1 - 21916_9, 2024/09
被引用回数：4 パーセンタイル：60.28(Multidisciplinary Sciences)Laser-driven neutron sources (LDNSs) can generate strong short-pulse neutron beams, which are valuable for scientific studies and engineering applications. Neutron resonance transmission analysis (NRTA) is a nondestructive technique used for determining the areal density of each nuclide in a material sample using pulsed thermal and epithermal neutrons. Herein, we report the first successful NRTA performed using an LDNS driven by the Laser for Fast Ignition Experiment at the Institute of Laser Engineering, Osaka University. The key challenge was achieving a well-resolved resonance transmission spectrum for material analysis using an LDNS with a limited number of laser shots in the presence of strong background noise. We addressed this by employing a time-gated Li-glass scintillation neutron detector to measure the transmission spectra, reducing the impact of electromagnetic noise and neutron and gamma-ray flashes. Output waveforms were recorded for each laser shot and analyzed offline using a counting method. This approach yielded a spectrum with distinct resonances, which were attributed to 
In and 
Ag, as confirmed through neutron transmission simulation. The spectrum was analyzed using the least-square nuclear-resonance fitting program, REFIT, demonstrating the possibility of using an LDNS for nondestructive areal-density material characterization.
Nguyen, T.-D.*; Singh, C.*; Kim, Y. S.*; Han, J. H.*; Lee, D.-H.*; Lee, K.*; Harjo, S.; Lee, S. Y.*
Journal of Materials Research and Technology, 31, p.1547 - 1556, 2024/07
被引用回数：9 パーセンタイル：75.08(Materials Science, Multidisciplinary)This study investigates the mechanical properties of a friction-stir-welded (FSW) AA6061-T6 aluminum alloy at ultra-low temperature (ULT) of 20 K. In-situ neutron diffraction and orientation imaging microscopy were employed to compare the tensile deformation behavior of the base metal (BM) and heat-affected zone (HAZ) in the FSW aluminum plate. The results demonstrate that compared to room-temperature (RT), ULT induces a significant improvement in tensile strength and ductility in both the BM and HAZ. The enhanced mechanical properties in BM at ULT result from a more homogeneous deformation than occurs at RT. On the other hand, HAZ at ULT exhibits an even lower yield strength than at RT, but the strain hardening rate (SHR) is the most significant among the alloys, leading to a tensile strength of 346 MPa and the highest ductility of 46.8%. The lowest yield strength corresponds to the lowest-hardness zones in HAZ, caused by dissolved/coarsened precipitates during the FSW process.
Li-glass detector to gamma rays by a coincidence method伊藤 史哲*; Lee, J.; 弘中 浩太; 高橋 時音; 鈴木 敏*; 持丸 貴則*; 堀 順一*; 寺田 和司*; 小泉 光生
Nuclear Instruments and Methods in Physics Research A, 1064, p.169465_1 - 169465_9, 2024/07
被引用回数：0 パーセンタイル：0.00(Instruments & Instrumentation)The response of a gamma-ray spectrometer is generally determined by analyzing full-energy peaks. However, full-energy peaks cannot be measured easily in the case of scintillation detectors that consist of light elements, such as glass scintillators. Only a strong Compton plateau appears in the spectrum of such detectors. Therefore, Compton edgers were used to evaluate the response of these detectors. The response of a low-resolution Li-glass detector to gamma rays was measured for the first time by a coincidence method with a high-resolution LaBr
:Ce detector using cascade gamma rays (2.75 and 1.37 MeV) from a 
Na source. Coincidence gates were applied at the peaks of the spectrum of the LaBr:Ce detector at the 0.51 MeV annihilation peak, and the sum peaks of a gamma ray and a backscattered gamma ray. By analyzing the gated spectra of the Li-glass detector, the energy-dependent detector response (i.e., the output strength and its dispersion) was determined.
Rossi, F.; Lee, J.; 児玉 有; 弘中 浩太; 小泉 光生; 堀 順一*; 寺田 和司*; 佐野 忠史*
Proceedings of 65th Annual Meeting of the Institute of Nuclear Materials Management (Internet), 8 Pages, 2024/07
Various non-destructive assay techniques are being used to verify different nuclear material. However, one of the difficulties of current NDA is the measurement of highly radioactive materials. Since 2015, the JAEA has been working on the development of various active non-destructive assay techniques to address some of the current challenges in nuclear safeguards. Among the various technologies proposed, the Neutron Resonance Analysis system combines signatures from NRTA, NRCA and the newly proposed NRFNA. The combination of those techniques can provide accurate information on the small fissile content in a sample. Neutrons are generated by a pulsed neutron source and slowed down into the moderator. Neutrons are collimated using lead and borated polyethylene to reach the sample, where various neutron-induced reactions occur. n/g PSD plastic scintillators are used to measure the captured gamma rays and fission neutrons at sample location. GS20 is used to collect the transmitted neutrons downstream of the source-sample beamline. A first measurement campaign was performed using natural uranium sample. The possibility of using NRFNA to identify fissile materials within a sample was clearly demonstrated, but the detectors used were not sufficient to achieve a good n/g PSD. New PSD scintillators were introduced. A first measurement campaign was performed in 2023. The acquired data are currently being analyzed, but preliminary results show distinct fission resonance peaks of increasing intensity with varying thicknesses of the same natural uranium samples. Currently, an assembly of multiple scintillators is being investigated to provide a better signal. The new setup will be tested starting in early 2024. In this paper, we will describe in detail the NRA project development and the latest results from experimental campaign. This work is supported by MEXT under the subsidy for the "promotion for strengthening nuclear security and the like"
Kim, Y. S.*; Chae, H.*; Lee, D.-Y.*; Han, J. H.*; Hong, S.-K.*; Na, Y. S.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Lee, S.-Y.*
Materials Science & Engineering A, 899, p.146453_1 - 146453_7, 2024/05
被引用回数：11 パーセンタイル：81.15(Nanoscience & Nanotechnology)This work focused on the mechanical properties and serration-involved deformation behavior of advanced alloys at 15 K. Evolution of stacking faults and 
-martensite improved the mechanical performance of CoCrNi alloys, and significant strain-induced martensite transformation of DED-SS316L led to superior strength and strain hardening. A magnitude in stress drop was governed by dislocation density, phase type, and lattice defects, irrespective of processing method. FCC {200} notably was influenced recovery behavior after stress drop, and the contribution of strain energy density by serration on tensile toughness was the greatest for HR-CoCrNi.
Chae, H.*; Huang, E.-W.*; Jain, J.*; Lee, D.-H.*; Harjo, S.; 川崎 卓郎; Lee, S. Y.*
Metals and Materials International, 30(5), p.1321 - 1330, 2024/05
被引用回数：8 パーセンタイル：52.40(Materials Science, Multidisciplinary)In situ neutron diffraction during tensile deformation was performed for the stainless steels prepared by the additive manufacturing (AM) processes with two strategies: vertically built and horizontally built. The AM steels were further aged without solid solution treatment. As the results, the retained austenite was found to be more stable because the chemical composition became homogeneous by aging, and the onset of deformation induced martensitic transformation was delayed.
Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Duguet, T.*; G
mez-Ramos, M.*; Holt, J. D.*; Hu, B. S.*; et al.
Physical Review C, 109(3), p.034312_1 - 034312_15, 2024/03
被引用回数：3 パーセンタイル：59.72(Physics, Nuclear)理化学研究所RIビームファクトリーにて中性子過剰核
Arビームからの1中性子ノックアウト反応実験を行い、
Arのエネルギー準位および分光学的因子を導出した。特に、第一励起状態の
への分光学的因子が大きいことから、始状態のArの基底状態において中性子が
軌道を多く占めていることがわかった。これは、中性子数32がよい魔法数として知られる
Caとは異なった性質であり、カルシウムからアルゴンへと陽子が2個減ることで閉殻構造が大きく崩れることが明らかになった。
Lee, J.; 弘中 浩太; 伊藤 史哲*; 小泉 光生; 堀 順一*; 佐野 忠史*
Journal of Nuclear Science and Technology, 61(1), p.23 - 30, 2024/01
被引用回数：6 パーセンタイル：70.30(Nuclear Science & Technology)In the short-distance time-of-flight (TOF) measurements, the background events increase exponentially with decreasing the distance, and the high background increases the uncertainty of the measurement data. The moderated neutron beam includes the time-dependent background originating from the neutron moderator, such as 2.2 MeV gamma rays emitted by 
H(n,
) reaction in the moderator. In this paper, to achieve a compact neutron resonance transmission analysis system with high accuracy, we studied the relationship between the moderator and time-dependent background due to gamma rays. Monte Carlo simulations were carried out with the PHITS and the JENDL-4.0 to investigate the time distributions of neutrons and gamma rays emitted from the moderator. Ratios of the gamma-ray intensity to neutron intensity (S/S
ratio) were calculated for various moderators and flight distances. From the obtained results, moderator designs for maintaining low S/S ratio were discussed.
Lee, J.; 児玉 有; Rossi, F.; 弘中 浩太; 小泉 光生; 堀 順一*; 佐野 忠史*
第44回日本核物質管理学会年次大会会議論文集(インターネット), 4 Pages, 2023/11
核不拡散・核セキュリティ総合支援センターでは、試料中に含まれる少量の核分裂性物質を特定し定量する能力を向上させるための技術として、中性子飛行時間法を用いた中性子共鳴核分裂中性子分析(Neutron Resonance Fission Neutron Analysis: NRFNA)の技術開発を進めている。本発表会では、核分裂性物質の非破壊分析のために進めているNRFNA技術の紹介及びその基礎実験の結果について報告する。
Be ground-state molecular structure using Be(
)He triple differential reaction cross-section measurementsLi, P. J.*; Beaumel, D.*; Lee, J.*; Assi
, M.*; Chen, S.*; Franchoo, S.*; Gibelin, J.*; Hammache, F.*; Harada, T.*; 延与 佳子*; et al.
Physical Review Letters, 131(21), p.212501_1 - 212501_7, 2023/11
被引用回数：31 パーセンタイル：94.10(Physics, Multidisciplinary)Beのクラスター構造を()反応を用いて調査した。三重微分断面積が実験的に測定され、Tohsaki-Horiuchi-Schuck-Rpke波動関数の方法や反対称化分子動力学を用いた歪曲波インパルス近似計算と比較した。実験データと理論計算の顕著な一致が確認され、Beの比較的コンパクトな分子状態を確認した。
Domal, S. J.*; Correa-Alfonso, C. M.*; Paulbeck, C. J.*; Griffin, K. T.*; 佐藤 達彦; 船本 幸代*; Cullings, H. M.*; Egbert, S. D.*; 遠藤 章; Hertel, N. E.*; et al.
Health Physics, 125(4), p.245 - 259, 2023/10
被引用回数：2 パーセンタイル：29.31(Environmental Sciences)原爆被爆者に対する線量評価は、大人・小児・幼児の3体の単純な数学ファントムに基づいて構築されたDS02システムが利用されており、妊婦や胎児に対する詳細な線量評価は行われていかなった。そこで、放射線影響研究所を中心とする日米共同研究チームは、最新の計算科学に基づいて1945年の日本人体型を再現した様々な人体模型(J45シリーズ)を開発し、より精度の高い線量評価を実施してきた。本研究では、様々な週齢の胎児・妊婦人体模型を用いて、その姿勢が被ばく線量に与える影響を検討した。その結果、妊婦の姿勢は、特に胎児の被ばく線量に大きな影響を与えることが分かった。
Esser, S. P.*; Rahlff, J.*; Zhao, W.*; Predl, M.*; Plewka, J.*; Sures, K.*; Wimmer, F.*; Lee, J.*; Adam, P. S.*; McGonigle, J.*; et al.
Nature Microbiology (Internet), 8(9), p.1619 - 1633, 2023/09
被引用回数：14 パーセンタイル：81.39(Microbiology)CRISPR-Cas systems defend prokaryotic cells from viruses, plasmids, and other mobile genetic elements. Capitalizing on multi-omics approaches, we show here that the CRISPR-Cas systems of uncultivated archaea also play an integral role in mitigating potentially detrimental interactions with episymbionts. A comprehensive analysis of CRISPR-Cas-based infection histories revealed that uncultivated deep-subsurface archaeal primary-producers defend themselves from archaeal episymbionts of the DPANN superphylum of archaea, some of which are known to fuse their membranes with their host. We show that host cells counter these attacks by deploying one of two CRISPR-Cas systems (type I-B and type III-A) to target and disrupt essential genes in the episymbiont. However, genome-scale modeling of metabolic interactions between two deep subsurface host-symbiont systems revealed that host cells also benefit from the symbionts via metabolic complementation. We speculate that populations of these uncultivated archaeal episymbionts are currently transitioning from a parasitic lifestyle to one of mutualism, as must have occurred in countless mutualistic systems known today. By expanding our analysis to thousands of archaeal genomes, we conclude that CRISPR-Cas mediated resistance to archaeal episymbiosis evolved independently in various archaeal lineages and may be a wide-spread evolutionary phenomenon.
