Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Masaki, Nobuo*; Kato, Koji*; Yamamoto, Tomohiko; Miyagawa, Takayuki*; Fujita, Satoshi*; Okamura, Shigeki*
Nihon Kenchiku Gakkai Gijutsu Hokokushu, 28(68), p.81 - 84, 2022/02
no abstracts in English
Fukasawa, Tsuyoshi*; Okamura, Shigeki*; Yamamoto, Tomohiko; Kawasaki, Nobuchika; Hirotani, Tsutomu*; Moriizumi, Eriko*; Sakurai, Yu*; Masaki, Nobuo*
Proceedings of 2016 ASME Pressure Vessels and Piping Conference (PVP 2016) (Internet), 10 Pages, 2016/07
Half-scale thick rubber bearing to investigate ultimate properties application for a Sodium-cooled-Fast-Reactor. The fundamental restoring-force characteristics of the thick rubber bearings has been already cleared through the static loading tests using a half-scale thick rubber bearing, 800 mm in diameter. However, variations of the restoring force characteristics and ultimate properties have not been obtained yet. The purpose of this paper is to indicate the variation of the stiffness and damping ratio concerning restoring force characteristics and the breaking strain or stress as ultimate properties through static loading tests using the half-scale thick rubber bearings.
Shibama, Yusuke; Okano, Fuminori; Yagyu, Junichi; Kaminaga, Atsushi; Miyo, Yasuhiko; Hayakawa, Atsuro*; Sagawa, Keiich*; Mochida, Tsutomu*; Morimoto, Tamotsu*; Hamada, Takashi*; et al.
Fusion Engineering and Design, 98-99, p.1614 - 1619, 2015/10
Times Cited Count：4 Percentile：32.74(Nuclear Science & Technology)The JT-60SA vacuum vessel (150 tons) is a double wall torus structure and the maximum major radius of 5.0 m and height of 6.6 m. The manufacturing design concept is that the vessel is split in the 10 toroidal sectors manufactured at factory, and assembled on-site; seven of the 40-degree sectors, two of the 30-degree beside final one, and the final of the 20-degree. The final sector is assembled with the VV thermal shield and toroidal field magnets into the 340-degree as prepared in one sector. Sectors are temporally fitted on-site and adjusted one over the other before the assembly. After measurement of the dimensions and the reference, these sectors are transferred onto the cryostat base. First, three 80-degree sectors are manufactured with mating each 40-degree sector by direct joint welding. The rest sectors including the final sector are jointed with splice plates. Welding manipulator and its guide rails are used for these welding. In this paper, the detail of the VV sectors assembly including the final sector is explained. Welding technologies to joint the two of 40-degree sectors are reported with the present manufacturing status and the welding trial on the vertical stub with the partial mock-up of the final sector are discussed with the assembly process.
Yamamoto, Tomohiko; Kawasaki, Nobuchika; Fukasawa, Tsuyoshi*; Okamura, Shigeki*; Somaki, Takahiro*; Samejima, Yusuke*; Masaki, Nobuo*
Proceedings of 2015 ASME Pressure Vessels and Piping Conference (PVP 2015) (Internet), 7 Pages, 2015/07
Since a SFR (Sodium-cooled Fast Reactor) has thin-walled component structures, a seismic isolation system is employed to mitigate the seismic force. Seismic isolation system for applying the SFR consists of the laminated rubber bearing considering characteristics of SFR structures. This paper describes a basic mechanical characteristic examination with a 1/8 scale model and a characterization examination plan of half-scale laminated rubber.
Fukasawa, Tsuyoshi*; Okamura, Shigeki*; Yamamoto, Tomohiko; Kawasaki, Nobuchika; Somaki, Takahiro*; Sakurai, Yu*; Masaki, Nobuo*
Proceedings of 2015 ASME Pressure Vessels and Piping Conference (PVP 2015) (Internet), 10 Pages, 2015/07
This paper described the results of static loading tests using a half-scale rubber bearing model to investigate the fundamental characteristics such as restoring force of a rubber bearing applied to a Sodium-Cooled-Fast-Reactor (SFR). Since the SFR has thin-walled structures, a seismic isolation system is employed to mitigate the seismic force. The static loading tests were performed using the half-scale rubber bearing with a diameter of 800 mm in the range which exceeds a linear limit of horizontal direction and a yield stress of vertical direction to investigate the horizontal and vertical of each stiffness and damping ratio. The fundamental characteristic of rubber bearing employed to the SFR and the validity of a design formula became clear through the static tests.
protease I at pD 8.0; Protonation states and hydration structure in the free-formOnishi, Yuki*; Yamada, Taro*; Kurihara, Kazuo; Tanaka, Ichiro*; Sakiyama, Fumio*; Masaki, Takeharu*; Niimura, Nobuo*
Biochimica et Biophysica Acta; Proteins and Proteomics, 1834(8), p.1642 - 1647, 2013/08
Times Cited Count：8 Percentile：23.68(Biochemistry & Molecular Biology)The structure of the free-form of protease I (API) at pD 8.0 was refined by simultaneous use of single crystal X-ray and neutron diffraction data sets to investigate the protonation states of key catalytic residues of the serine protease. Occupancy refinement of the catalytic triad in the active site of API free-form showed that ca. 30% of the imidazole ring of H57 and ca. 70% of the hydroxyl group of S194 were deuterated. This observation indicates that a major fraction of S194 is protonated in the absence of a substrate. The protonation state of the catalytic triad in API was compared with the bovine 
-trypsin-BPTI complex. The comparison led to the hypothesis that close contact of a substrate with S194 could lower the acidity of its hydroxyl group, thereby allowing H57 to extract the hydrogen from the hydroxyl group of S194. H210, which is a residue specific to API, does not form a hydrogen bond with the catalytic triad residue D113. Instead, H210 forms a hydrogen bond network with S176, H177 and a water molecule. The close proximity of the bulky, hydrophobic residue W169 may protect this hydrogen bond network, and this protection may stabilize the function of API over a wide pH range.
Kuno, Yusuke; Oda, Takuji*; Tanaka, Satoru*; Fukasawa, Tetsuo*; Tanabe, Tomoyuki*; Tamai, Hiroshi; Horio, Kenta*; Hamasaki, Manabu*; Shinohara, Nobuo*; Ikeda, Yuta*
Proceedings of INMM 52nd Annual Meeting (CD-ROM), 10 Pages, 2011/07
The substance and implication of PR from the viewpoints of risk evaluation on nuclear proliferation was studied in this paper. As an example, ten next-generation reprocessing technology candidates were evaluated with GIF PR and PP methodology to find degree of relative difference in PR from the presently available technology - PUREX. PR effectiveness in proliferation risk was also assessed and it was found that the effectiveness of PR measures is subject to the status of each nation.
Yamasaki, Chisato*; Murakami, Katsuhiko*; Fujii, Yasuyuki*; Sato, Yoshiharu*; Harada, Erimi*; Takeda, Junichi*; Taniya, Takayuki*; Sakate, Ryuichi*; Kikugawa, Shingo*; Shimada, Makoto*; et al.
Nucleic Acids Research, 36(Database), p.D793 - D799, 2008/01
Times Cited Count：52 Percentile：71.76(Biochemistry & Molecular Biology)Here we report the new features and improvements in our latest release of the H-Invitational Database, a comprehensive annotation resource for human genes and transcripts. H-InvDB, originally developed as an integrated database of the human transcriptome based on extensive annotation of large sets of fulllength cDNA (FLcDNA) clones, now provides annotation for 120 558 human mRNAs extracted from the International Nucleotide Sequence Databases (INSD), in addition to 54 978 human FLcDNAs, in the latest release H-InvDB. We mapped those human transcripts onto the human genome sequences (NCBI build 36.1) and determined 34 699 human gene clusters, which could define 34 057 protein-coding and 642 non-protein-coding loci; 858 transcribed loci overlapped with predicted pseudogenes.
Shibama, Yusuke; Okano, Fuminori; Yagyu, Junichi; Kaminaga, Atsushi; Miyo, Yasuhiko; Hayakawa, Atsuro*; Sagawa, Keiich*; Mochida, Tsutomu*; Morimoto, Tamotsu*; Hamada, Takashi*; et al.
no journal, ,
no abstracts in English
