Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kizu, Kaname; Murakami, Haruyuki; Tsuchiya, Katsuhiko; Yoshida, Kiyoshi; Nomoto, Kazuhiro*; Imai, Yoshio*; Minato, Tsuneaki*; Obana, Tetsuhiro*; Hamaguchi, Shinji*; Takahata, Kazuya*
IEEE Transactions on Applied Superconductivity, 23(3), p.4200104_1 - 4200104_4, 2013/06
Times Cited Count:23 Percentile:70.98(Engineering, Electrical & Electronic)The maximum magnetic field, current and voltage of CS for JT-60SA are 8.9 T, 20 kA and 10 kV, respectively. NbSn conductor with high field and high current density was developed. The outer diameter and height of CS are 2 and 1.6 m, respectively. Several components were newly developed and tested. To increase the supplying flux, winding diameter should be maximized as possible. The butt type joint was developed that can minimize the joint space. DGEBA epoxy used for main binder of insulation showed sufficient tensile strength even though the ray irradiation of 100 kGy. Insulation characteristics of 44 stack sample applying double of operational stress with operational cycle showed the larger withstand voltage than 21 kV. According to these results, the fabrication of CS can be started.
Murakami, Haruyuki; Kizu, Kaname; Tsuchiya, Katsuhiko; Yoshida, Kiyoshi; Yamauchi, Kunihito; Shimada, Katsuhiro; Terakado, Tsunehisa; Matsukawa, Makoto; Hasegawa, Mitsuru*; Minato, Tsuneaki*; et al.
IEEE Transactions on Applied Superconductivity, 22(3), p.9501405_1 - 9501405_5, 2012/06
Times Cited Count:4 Percentile:29.2(Engineering, Electrical & Electronic)The withstand voltage of turn insulation is essential issues for the superconducting magnet. The actual turn voltage is larger than the turn voltage under the ideal condition because of the voltage fluctuations of the power supply and the resonance phenomenon in the magnet. In this paper, the voltage measurement of the JT-60U power supply and the resonance characteristics of the EF4 are described. The actual maximum turn voltage is almost same as the voltage under the ideal condition.
Hasegawa, Mitsuru*; Horii, Hiroyuki*; Nomoto, Kazuhiro*; Imai, Yoshio*; Murai, Takashi*; Minato, Tsuneaki*; Kuno, Kazuo*; Tsuchiya, Katsuhiko; Murakami, Haruyuki; Kizu, Kaname; et al.
Proceedings of 24th International Cryogenic Engineering Conference (ICEC 24) and International Cryogenic Materials Conference 2012 (ICMC 2012) (CD-ROM), p.571 - 574, 2012/05
JT-60U magnet system will be upgraded to the superconducting coils (JT-60SA) in the Broader Approach project. JT-60SA magnet system has 18 Toroidal Field coils, a Central Solenoid with 4 modules and 6 Equilibrium Field (EF) coils. This paper describes the manufacturing procedure of EF4 coil, that is the first manufactured EF coil of JT-60SA. The winding pack of EF4 coil was successfully manufactured within geometrical tolerance requirements.
Tsuchiya, Katsuhiko; Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi; Murai, Takashi*; Okada, Yasuyuki*; Nomoto, Kazuhiro*; Minato, Tsuneaki*
no journal, ,
no abstracts in English
Murakami, Haruyuki; Kizu, Kaname; Tsuchiya, Katsuhiko; Yoshida, Kiyoshi; Hasegawa, Mitsuru*; Minato, Tsuneaki*; Sako, Katsuhisa*
no journal, ,
no abstracts in English