Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 27

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

X-ray CT basic data about inspection of irradiated fuel assembly

Ishimi, Akihiro; Tachi, Yoshiaki; Katsuyama, Kozo; Misawa, Susumu*

JAEA-Data/Code 2014-012, 72 Pages, 2014/08

JAEA-Data-Code-2014-012.pdf:82.93MB

The Fuels Monitoring Section (FMS) of Japan Atomic Energy Agency (JAEA) has carried out examination of the fuel assemblies irradiated at Experimental Fast Reactor Joyo to verify about deformation and damage using X-ray computed tomography (CT) technique. This technique can observe deformation and internal information of the irradiated fuel assembly without dismantling and thus can apply to inspections of the irradiated fuel assembly in Fukushima Daiichi Nuclear Power Plant (1F). In order to obtain X-ray CT basic data for 1F fuel assembly inspection, the simulated specimens were made and the X-ray CT examinations were performed in the Fuels Monitoring Facility (FMF). This paper compiled the data about the X-ray CT examination of the simulated specimens.

Journal Articles

Status of experimental and analytical thermal-hydraulic studies on severe accident events at Fukushima Dai-ichi NPP

Takase, Kazuyuki; Yoshida, Hiroyuki; Liu, W.; Misawa, Takeharu; Nagatake, Taku; Yamashita, Susumu

Proceedings of 2013 International Congress on Advances in Nuclear Power Plants (ICAPP 2013) (USB Flash Drive), 6 Pages, 2013/04

Journal Articles

Beam diagnostics in the J-PARC linac for ACS upgrade

Miura, Akihiko; Sato, Susumu; Tomisawa, Tetsuo; Igarashi, Zenei*; Miyao, Tomoaki*; Ikegami, Masanori*; Toyama, Takeshi*

Proceedings of 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC 2011) (Internet), p.50 - 52, 2011/08

J-PARC had developed the beam diagnostic devices for the present J-PARC linac and has used them since the operation start. J-PARC linac began the energy upgrade project since 2009 and 21 ACS cavities will be installed. Because the beam parameters are updated due to the project, new beam diagnostic devices are additionally fabricated and the diagnostic devices at the downstream part where the beam energy will be increased up to 400 MeV by ACS cavities should be developed. In this paper, we introduce the development of the beam diagnostic devices for the project and the new developing devices.

Journal Articles

Study of J-PARC linac beam position monitor as phase monitor

Sato, Susumu; Miura, Akihiko; Tomisawa, Tetsuo; Sako, Hiroyuki; Morishita, Takatoshi; Ueno, Akira; Hasegawa, Kazuo; Yoshikawa, Hiroshi; Igarashi, Zenei*; Ikegami, Masanori*

Proceedings of 2009 Particle Accelerator Conference (PAC '09) (DVD-ROM), p.3591 - 3593, 2009/05

Journal Articles

Beam energy measurement at J-PARC linac

Sato, Susumu; Igarashi, Zenei*; Tomisawa, Tetsuo; Miura, Akihiko; Ueno, Akira; Sako, Hiroyuki; Morishita, Takatoshi; Kondo, Yasuhiro; Shen, G.; Akikawa, Hisashi*; et al.

Proceedings of 5th Annual Meeting of Particle Accelerator Society of Japan and 33rd Linear Accelerator Meeting in Japan (CD-ROM), p.500 - 502, 2008/00

no abstracts in English

Journal Articles

Profile measurement and transverse matching in J-PARC linac

Akikawa, Hisashi*; Igarashi, Zenei*; Ikegami, Masanori*; Lee, S.*; Sato, Susumu; Shen, G.; Tomisawa, Tetsuo; Ueno, Akira

Proceedings of 2007 Particle Accelerator Conference (PAC '07) (Internet), p.1472 - 1474, 2007/08

Beam commissioning of J-PARC linac has been performed since November 2006. We have wire scanners in order to measure beam profile and perform transverse matching. Four wire scanners are installed at each matching section. We report the result of measurement of beam profile and matching.

Journal Articles

Beam position monitor and its calibration in J-PARC LINAC

Sato, Susumu; Tomisawa, Tetsuo; Sako, Hiroyuki; Shen, G.; Ueno, Akira; Akikawa, Hisashi*; Igarashi, Zenei*; Lee, S.*; Ikegami, Masanori*; Kamikubota, Norihiko*

Proceedings of 2007 Particle Accelerator Conference (PAC '07) (Internet), p.4072 - 4074, 2007/08

The beam commissioning of J-PARC LINAC has been started in November 2006. Beam Position Monitors (BPM's) which had been calibrated on the bench setup with a scanning wire, take beam-based-calibration method in order to enable the beam to pass at the centre of a quadrupole magnet (Q-magnet). The installed BPM's and their calibration methods are described.

Journal Articles

Development of design technology on thermal-hydraulic performance in tight-lattice rod bundle, 3; Numerical estimation on rod bowing effect based on X-ray CT data

Misawa, Takeharu; Onuki, Akira; Mitsutake, Toru*; Katsuyama, Kozo; Misawa, Susumu*; Nagamine, Tsuyoshi; Nakamura, Yasuo; Akimoto, Hajime

Proceedings of 15th International Conference on Nuclear Engineering (ICONE-15) (CD-ROM), 8 Pages, 2007/04

Journal Articles

Commissioning strategies for J-PARC linac and L3BT

Ikegami, Masanori*; Lee, S.*; Akikawa, Hisashi*; Igarashi, Zenei*; Kondo, Yasuhiro; Okawa, Tomohiro; Ueno, Akira; Sako, Hiroyuki; Ao, Hiroyuki; Sato, Susumu; et al.

KEK Proceedings 2006-15 (CD-ROM), p.347 - 349, 2007/03

We plan to start the beam commissioning of J-PARC linac with reduced energy of 181 MeV in the end of this year. Detailed commissioning strategies for the linac and the succeeding beam transport line, to which we refer as L3BT or Linac-to-3-GeV-synchrotron Beam Transport, will be presented in this talk. The emphasis will be put on the commissioning procedures for two debuncher cavities and a transverse collimator system located in L3BT, because they are key elements in determining the final beam quality at the injection point to the succeeding 3-GeV synchrotron. The unique design and features of the collimator system are also presented.

Journal Articles

Upgrade of beam diagnostics in LEBT and MEBT of J-PARC LINAC

Sato, Susumu; Tomisawa, Tetsuo; Kondo, Yasuhiro; Ueno, Akira; Akikawa, Hisashi*; Igarashi, Zenei*; Lee, S.*; Kubota, Chikashi*; Ikegami, Masanori*

Proceedings of 23rd International Linear Accelerator Conference (LINAC 2006) (CD-ROM), p.268 - 270, 2007/00

In the J-PARC LINAC, upgrade of beam diagnostics of LEBT and MEBT is taken. Three beam current monitors and two beam phase monitors are added. In the LEBT and MEBT section, large number of accelerator devices are placed. Therefore to save the space, several modifications are needed, for example, additional monitors need to be welded with each other. Those details of the upgrade of beam diagnostics system are described.

Journal Articles

Installation of beam monitor sensors in the LINAC section of J-PARC

Sato, Susumu; Tomisawa, Tetsuo; Ao, Hiroyuki; Ueno, Akira; Akikawa, Hisashi*; Igarashi, Zenei*; Lee, S.*

Proceedings of 10th European Particle Accelerator Conference (EPAC '06) (CD-ROM), p.1151 - 1153, 2006/00

In the LINAC section of J-PARC, we have several type of sensors of monitor, i.e, Beam Position Monitor, Beam Profile Monitor, Beam Size Monitor, Current Monitor, Beam Phase Monitor, Beam Loss Monitor. Those sensors are being installed currently. The procedures, remarks during the installation, status are described in this paper. As an examle, the beam postion monitors are one of sensors which are taken cared intensively for their positioning on their housing quadrupole magnet, then our cares during their installation are described.

Journal Articles

Design of larger BPM in J-PARC LINAC

Sato, Susumu; Igarashi, Zenei*; Akikawa, Hisashi*; Tomisawa, Tetsuo; Lee, S.*; Ueno, Akira; Ikegami, Masanori*; Ao, Hiroyuki

Proceedings of 3rd Annual Meeting of Particle Accelerator Society of Japan and 31st Linear Accelerator Meeting in Japan (CD-ROM), p.127 - 129, 2006/00

In J-PARC LINAC section, several types of beam position monitors (BPMs) from 37.7 mm to 120 mm in diameter are allocated. In this paper, background of design and key points for a larger diameter (180 mm) of BPM are reported.

Journal Articles

Developments of the calibration tools for beam position monitor at J-PARC LINAC

Sato, Susumu; Tomisawa, Tetsuo; Akikawa, Hisashi; Ueno, Akira; Lee, S.*; Igarashi, Zenei*; Ikegami, Masanori*; Toyama, Takeshi*; Kamikubota, Norihiko*

Proceedings of 2005 Particle Accelerator Conference (PAC '05) (CD-ROM), p.2777 - 2779, 2005/00

The J-PARC LINAC requires for fine control of beam position to minimize beam loss. So that BPMs need to be calibrated with the accuracy of about a hundred micro-meters. The accuracy of BPMs are calibrated with the calibration tool and real beam. In this paper, details of these developments around BPMs are to be reported.

Journal Articles

Investigation of photo neutralization efficiency of high intensity H$$^{-}$$ beam with Nd:YAG laser in J-PARC

Tomisawa, Tetsuo; Akikawa, Hisashi; Sato, Susumu; Ueno, Akira; Kondo, Yasuhiro; Oigawa, Hiroyuki; Sasa, Toshinobu; Hasegawa, Kazuo; Lee, S.*; Igarashi, Zenei*; et al.

Proceedings of 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC 2005), p.275 - 277, 2005/00

The photo neutralization method with Nd:YAG laser for negative hydrogen ions has been expected as an available candidate for the transverse beam profile measurement. The fraction of photo detached electron can also be used for charge exchange procedure to extract very low power proton beam for Transmutation Experimental Facility in J-PARC. The laser system has advantages of maintenance and radiation hardness in high intensity proton accelerators. In order to establish the low power beam extraction system and beam profile monitor, the photo neutralization efficiency must be surveyed in practical beam line with high intensity H$$^{-}$$ beam. In this paper, an experimental set-up and preliminary results of photo neutralization method for intense H$$^{-}$$ beam in J-PARC MEBT1 are described.

Journal Articles

Design of 4-stripline beam position monitors of the J-PARC linac SDTL

Tomisawa, Tetsuo; Kishiro, Junichi; Hiroki, Fumio; Sato, Susumu; Igarashi, Zenei*; Lee, S.*; Nigorikawa, Kazuyuki*; Toyama, Takeshi*

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.165 - 167, 2004/08

It proceeds with the beam monitor production of the beam diagnosis system with J-PARC. In this paper, the present status of beam position monitors (BPM) for the SDTL is described. The impedance of strip line monitor have been adjusted in the construction of housing and electrodes of the BPM. The 4-stripline BPM has already been examined in the medium energy beam transport (MEBT) line. Preliminary results of beam position measurement for various beam conditions are reported.

Journal Articles

Beam commissioning of the J-PARC linac DTL1 at KEK

Kondo, Yasuhiro; Akikawa, Hisashi; Anami, Shozo*; Asano, Hiroyuki*; Fukui, Yuji*; Igarashi, Zenei*; Ikegami, Kiyoshi*; Ikegami, Masanori*; Ito, Takashi; Kawamura, Masato*; et al.

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.156 - 158, 2004/08

A commissioning of the J-PARC linac DTL1 is now under way at KEK. A 30mA H$$^{-}$$ beam was accelerated to 19.7-MeV, and 100% transmission was obtained with a 20-msec-pulse-width and 12.5-Hz-repetition beam. In this paper, present status of the DTL1 commissioning and preliminary results of the commissioning, such as emittance measurements, are presented.

Journal Articles

Systematic calibration of beam position monitor at J-PARC LINAC

Sato, Susumu; Tomisawa, Tetsuo; Hiroki, Fumio; Lee, S.*; Igarashi, Zenei*; Ikegami, Masanori*; Ueno, Akira; Kondo, Yasuhiro; Hasegawa, Kazuo; Toyama, Takeshi*; et al.

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.467 - 469, 2004/08

As a joint project of KEK and JAERI, a MW class of high intensity proton accelerator (J-PARC), consisting of Linac, 3 GeV-RCS, 50 GeV-MR, is under construction. For this accelerator, it is required to minimize the beam loss (typically, lower than0.1$$sim$$1 W/m at the linac). To achieve the requirement, beam trajectory needs to be controlled with accuracy of some 100 $$mu$$m. The first stage of the acceleration (up to 181 MeV during the first stage of construction) is done by linac. The beam position monitor (BPM) in the linac utilizes 4 stripline pickups (50 ohm) on the beam transportation chamber. In this paper, systematic calibration of the BPM is described.

Journal Articles

Systematic calibration of beam position monitor in the high intensity proton accelerator (J-PARC) linac

Sato, Susumu; Igarashi, Zenei*; Lee, S.*; Tomisawa, Tetsuo; Hiroki, Fumio; Kishiro, Junichi; Ikegami, Masanori*; Kondo, Yasuhiro; Hasegawa, Kazuo; Ueno, Akira; et al.

Proceedings of 22nd International Linear Accelerator Conference (LINAC 2004), p.429 - 431, 2004/00

As a joint project of KEK and JAERI, a MW class of high intensity proton accelerator (J-PARC), consisting of Linac, 3 GeV-RCS, 50 GeV-MR, is under construction at Tokai, Japan. For this accelerator, it is required to minimize the beam loss (typically, lower than 0.1$$sim$$1 W/m at the linac). To achieve the requirement, beam trajectory needs to be controlled with accuracy of some 100 micro-meter. The first stage of the acceleration (up to 181 MeV during the first stage of construction) is done by linac. The beam position monitor (BPM) in the linac utilizes 4 strip-line pickups (50 ohm) on the beam transportation chamber. In this paper, systematic calibration of the BPM is described.

Oral presentation

Measurement of fuel pin displacement in fuel assembly for fast reactor

Katsuyama, Kozo; Nagamine, Tsuyoshi; Nakamura, Yasuo; Misawa, Susumu*

no journal, , 

no abstracts in English

Oral presentation

Development of design technology on thermal-hydraulic performance in tight-lattice rod bundles, 2; Measurement of rod-bowing effect test assembly by X-ray CT technique

Katsuyama, Kozo; Misawa, Susumu*; Mitsutake, Toru*; Misawa, Takeharu; Nagamine, Tsuyoshi; Nakamura, Yasuo; Onuki, Akira; Akimoto, Hajime

no journal, , 

no abstracts in English

27 (Records 1-20 displayed on this page)