Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Watakabe, Tomoyoshi; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2024 Pressure Vessels & Piping Conference (PVP 2024) (Internet), 8 Pages, 2024/07
We have developed the buckling strength equations of vessels for fast reactors with seismic isolation system. The applicability of the buckling equations was confirmed by a series of buckling tests and analyses under monotonic or cyclic axial compressive load accompanied with constant horizontal load in the previous reports. In this report, we proposed a correction factor to reduce the buckling strength calculated by the buckling equations for large initial imperfections. A series of elastic-plastic buckling analyses considering large displacement and large strain theories was conducted to Grade 91 steel and austenitic stainless steel vessels which has a wide range of dimensions, initial imperfection amplitude, and vertical/horizontal load ratio. The simulation results showed that the correction factor generally shows a reduction tendency of buckling strength corresponding to initial imperfection amplitude, and the modified buckling equations are applicable to the vessels in fast reactors even for large initial imperfection amplitude which exceeds half the wall thickness.
Kumada, Takayuki; Iwahara, Daisuke*; Nishitsuji, Shotaro*; Akutsu, Kazuhiro*; Miura, Daisuke; Motokawa, Ryuhei; Sugita, Tsuyoshi; Torikai, Naoya*; Amino, Naoya*; Oku, Takayuki; et al.
Journal of Physical Chemistry C, 128(21), p.8797 - 8802, 2024/05
Times Cited Count：0 Percentile：0.00(Chemistry, Physical)We elucidated the entanglement of polybutadiene and silane coupling agent (SCA) molecules bound to Si substrates using spin-contrast-variation (SCV) neutron reflectivity (NR). In an annealed integral blend film of polybutadiene and SCA, a SCA layer generated on the Si substrate was composed of 70 vol. percent SCA molecules extended perpendicularly from the silicon substrate and entangled with 30 vol. percent polybutadiene molecules. By contrast, in an SCA-precoated polybutadiene film, the SCA-precoated layer is composed of densely packed SCA molecules forming crystal-like structure, and thus did not become entangled with the postcoated polybutadiene molecules. This poor entanglement resulted in poor binding between polybutadiene and Si substrate.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Okajima, Satoshi
Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 8 Pages, 2023/07
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Gr.91 and austenitic stainless steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively.
Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Oku, Takayuki; Torikai, Naoya*; Niizeki, Tomotake*
Hamon, 32(4), p.165 - 168, 2022/11
We demonstrated the advantage of spin-contrast-variation neutron reflectometry on the structure analysis of buried interface between resin and porous silica layers. The interface structure was not reproduced by the normal Gaussian model, but by the asymmetric interface model where crosslinked polymer chains neither permeate the pore nor follow the surface roughness of the silica layer.
Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Oishi, Kazuki*; Morikawa, Toshiaki*; Kawamura, Yukihiko*; Suzuki, Junichi*; Oku, Takayuki; Torikai, Naoya*; Niizeki, Tomotake*
Journal of Applied Crystallography, 55(5), p.1147 - 1153, 2022/10
Times Cited Count：2 Percentile：35.52(Chemistry, Multidisciplinary)Spin-contrast-variation neutron reflectivity obtains multiple reflectivity curves from a single sample and a single beam source. We used the strong point of the technique to reveal that, although methylated-perhydropolysilazane-derived silica layer has a higher porosity near the interface with acrylic urethane resin, the resin did not permeate the pore network.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Okajima, Satoshi
Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 9 Pages, 2022/07
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of austenitic stainless steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. Moreover, a series of finite element analyzes to confirm the applicability of the evaluation method in 2.25Cr-1Mo steel and up to 650 
C were conducted.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. Moreover, a series of finite element analyzes using a model with residual stress due to welding revealed that the effect of residual stress on buckling strength is negligible in the evaluation method.
Miura, Hikaru*; Ishimaru, Takashi*; Ito, Yukari*; Kuribara, Yuichi; Otosaka, Shigeyoshi*; Sakaguchi, Aya*; Misumi, Kazuhiro*; Tsumune, Daisuke*; Kubo, Atsushi*; Higaki, Shogo*; et al.
Scientific Reports (Internet), 11, p.5664_1 - 5664_11, 2021/03
Times Cited Count：15 Percentile：64.34(Multidisciplinary Sciences)For the first time, we isolated and investigated seven CsMPs (radioactive caesium-bearing microparticles) from marine particulate matter and sediment. From the elemental composition, the 
Cs/
Cs activity ratio, and the Cs activity per unit volume results, we inferred that the five CsMPs collected from particulate matter were emitted from Unit 2 of the FDNPP, whereas the two CsMPs collected from marine sediment were possibly emitted from Unit 3. The presence of CsMPs can cause overestimation of the solid-water distribution coefficient of Cs in marine sediments and particulate matter and a high apparent radiocaesium concentration factor for marine biota. CsMPs emitted from Unit 2, which were collected from the estuary of a river that flowed through a highly contaminated area, may have been deposited on land and then transported by the river. By contrast, CsMPs emitted from Unit 3 were possibly transported eastward by the wind and deposited directly onto the ocean surface.
Kumada, Takayuki; Akutsu, Kazuhiro*; Oishi, Kazuki*; Morikawa, Toshiaki*; Kawamura, Yukihiko*; Sahara, Masae*; Suzuki, Junichi*; Miura, Daisuke*; Torikai, Naoya*
J-PARC 20-02; J-PARC MLF Annual Report 2019, p.38 - 40, 2021/00
Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Suzuki, Junichi*; Torikai, Naoya*
Hamon, 30(4), p.207 - 211, 2020/11
We developed a technique of spin-contrast-variation neutron reflectivity (SCV-NR) for structural analyses of multilayer films. The SCV-NR curves of the polystyrene monolayer film were precisely reproduced using a common set of structural parameters and neutron scattering length density at each proton polarization. This result ensures that SCV-NR curves are not deformed by inhomogeneous PH due to the spin-diffusion mechanism. The number of structural parameters of the lamellar microphase-separated poly(styrene-block-isoprene) thin film is too large to determine with a single unpolarized reflectivity curve only. However, these parameters converged through the global analysis of the SCV-NR curves. In this manner, SCV-NR determines the structure of multilayer films while excluding the incorrect structural model that accidentally accounts for a single unpolarized reflectivity curve only.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2020 Pressure Vessels and Piping Conference (PVP 2020) (Internet), 9 Pages, 2020/08
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. In addition, buckling strength evaluated by elasto-plastic buckling analysis had good accuracy compared to each test result by considering the stress-strain relationship and imperfection of test specimen.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Kubo, Koji*; Sato, Kenichiro*; Wakai, Takashi; Shimomura, Kenta
Nihon Kikai Gakkai M&M 2017 Zairyo Rikigaku Kanfuarensu Koen Rombunshu (Internet), p.591 - 595, 2017/10
no abstracts in English
Ishizawa, Akihiro*; Idomura, Yasuhiro; Imadera, Kenji*; Kasuya, Naohiro*; Kanno, Ryutaro*; Satake, Shinsuke*; Tatsuno, Tomoya*; Nakata, Motoki*; Nunami, Masanori*; Maeyama, Shinya*; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 92(3), p.157 - 210, 2016/03
The high-performance computer system Helios which is located at The Computational Simulation Centre (CSC) in The International Fusion Energy Research Centre (IFERC) started its operation in January 2012 under the Broader Approach (BA) agreement between Japan and the EU. The Helios system has been used for magnetised fusion related simulation studies in the EU and Japan and has kept high average usage rate. As a result, the Helios system has contributed to many research products in a wide range of research areas from core plasma physics to reactor material and reactor engineering. This project review gives a short catalogue of domestic simulation research projects. First, we outline the IFERC-CSC project. After that, shown are objectives of the research projects, numerical schemes used in simulation codes, obtained results and necessary computations in future.
Sakai, Hiroshi*; Enami, Kazuhiro*; Furuya, Takaaki*; Kako, Eiji*; Kondo, Yoshinari*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Sato, Masato*; Shinoe, Kenji*; et al.
Proceedings of 56th ICFA Advanced Beam Dynamics Workshop on Energy Recovery Linacs (ERL 2015) (Internet), p.63 - 66, 2015/12
no abstracts in English
Numata, Naoto*; Asakawa, Tomoyuki*; Sakai, Hiroshi*; Umemori, Kensei*; Furuya, Takaaki*; Shinoe, Kenji*; Enami, Kazuhiro*; Egi, Masato*; Sakanaka, Shogo*; Michizono, Shinichiro*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.566 - 570, 2015/09
no abstracts in English
Umemori, Kensei*; Enami, Kazuhiro*; Furuya, Takaaki*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Sakai, Hiroshi*; Sato, Masato*; Shinoe, Kenji*; Sawamura, Masaru; et al.
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.2537 - 2539, 2014/07
We developed ERL main linac cryomodule for Compact ERL (cERL) project, which was constructed in KEK. The module includes two 9-cell L-band superconducting cavities. After construction of cERL recirculation loop, beam operation was started. First electron beam successfully passed the main linac cavities. After adjusting beam optics, energy recovery operation was achieved. Main linac cavity was enough stable for ERL beam operation, however, field emission was a problem for long term operation.
Enami, Kazuhiro*; Furuya, Takaaki*; Sakai, Hiroshi*; Sato, Masato*; Shinoe, Kenji*; Umemori, Kensei*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Arakawa, Dai*; et al.
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.2534 - 2536, 2014/07
We evaluated a slidejack tuner adopted as compact ERL Main Linac tuner. The tuner compensates the frequency by extending a cavity. Tuning is driven by two system, piezo and slidejack system. Slide-jack mechanism with long stroke drives coarsely piezo adjust precisely and fast. We tested performance of the tuners on operation.
Sato, Masato*; Enami, Kazuhiro*; Furuya, Takaaki*; Michizono, Shinichiro*; Miura, Takako*; Qiu, F.*; Sakai, Hiroshi*; Shinoe, Kenji*; Umemori, Kensei*; Sawamura, Masaru; et al.
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.2531 - 2533, 2014/07
For the main linac of ERL, high loaded Q (QL) operation is desirable to reduce the input generator power. In such operation mode, the suppression of the micophonics is important to stabilize RF amplitude and phase. One of reasons which causes microphonics is mechanical vibration, which changes the cavity frequency. The vibrations of the cavities, the cryomodule and the floor were investigated and compared with the microphnics data taken during cERL operation.
and EuAlNakamura, Ai*; Hiranaka, Yuichi*; Hedo, Masato*; Nakama, Takao*; Miura, Yasunao*; Tsutsumi, Hiroki*; Mori, Akinobu*; Ishida, Kazuhiro*; Mitamura, Katsuya*; Hirose, Yusuke*; et al.
JPS Conference Proceedings (Internet), 3, p.011012_1 - 011012_6, 2014/06
Nakamura, Ai*; Hiranaka, Yuichi*; Hedo, Masato*; Nakama, Takao*; Miura, Yasunao*; Tsutsumi, Hiroki*; Mori, Akinobu*; Ishida, Kazuhiro*; Mitamura, Katsuya*; Hirose, Yusuke*; et al.
Journal of the Physical Society of Japan, 82(10), p.104703_1 - 104703_10, 2013/10
Times Cited Count：38 Percentile：82.14(Physics, Multidisciplinary)
