Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Watakabe, Tomoyoshi; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2024 Pressure Vessels & Piping Conference (PVP 2024) (Internet), 8 Pages, 2024/07
We have developed the buckling strength equations of vessels for fast reactors with seismic isolation system. The applicability of the buckling equations was confirmed by a series of buckling tests and analyses under monotonic or cyclic axial compressive load accompanied with constant horizontal load in the previous reports. In this report, we proposed a correction factor to reduce the buckling strength calculated by the buckling equations for large initial imperfections. A series of elastic-plastic buckling analyses considering large displacement and large strain theories was conducted to Grade 91 steel and austenitic stainless steel vessels which has a wide range of dimensions, initial imperfection amplitude, and vertical/horizontal load ratio. The simulation results showed that the correction factor generally shows a reduction tendency of buckling strength corresponding to initial imperfection amplitude, and the modified buckling equations are applicable to the vessels in fast reactors even for large initial imperfection amplitude which exceeds half the wall thickness.
Arima-Osonoi, Hiroshi*; Takata, Shinichi; Kasai, Satoshi*; Ouchi, Keiichi*; Morikawa, Toshiaki*; Miyata, Noboru*; Miyazaki, Tsukasa*; Aoki, Hiroyuki; Iwase, Hiroki*; Hiroi, Kosuke; et al.
Journal of Applied Crystallography, 56(6), p.1802 - 1812, 2023/12
Times Cited Count:3 Percentile:67.34(Chemistry, Multidisciplinary)Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. Moreover, a series of finite element analyzes using a model with residual stress due to welding revealed that the effect of residual stress on buckling strength is negligible in the evaluation method.
Yang, Z. H.*; Kubota, Yuki*; Corsi, A.*; Yoshida, Kazuki; Sun, X.-X.*; Li, J. G.*; Kimura, Masaaki*; Michel, N.*; Ogata, Kazuyuki*; Yuan, C. X.*; et al.
Physical Review Letters, 126(8), p.082501_1 - 082501_8, 2021/02
Times Cited Count:55 Percentile:96.38(Physics, Multidisciplinary)A quasifree (,
) experiment was performed to study the structure of the Borromean nucleus
B, which had long been considered to have a neutron halo. By analyzing the momentum distributions and exclusive cross sections, we obtained the spectroscopic factors for
and
orbitals, and a surprisingly small percentage of 9(2)% was determined for
. Our finding of such a small
component and the halo features reported in prior experiments can be explained by the deformed relativistic Hartree-Bogoliubov theory in continuum, revealing a definite but not dominant neutron halo in
B. The present work gives the smallest
- or
-orbital component among known nuclei exhibiting halo features and implies that the dominant occupation of
or
orbitals is not a prerequisite for the occurrence of a neutron halo.
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
Proceedings of ASME 2020 Pressure Vessels and Piping Conference (PVP 2020) (Internet), 9 Pages, 2020/08
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. In addition, buckling strength evaluated by elasto-plastic buckling analysis had good accuracy compared to each test result by considering the stress-strain relationship and imperfection of test specimen.
Yokoyama, Tatsunori; Kimura, Junichi*; Mitsuguchi, Takehiro; Danhara, Toru*; Hirata, Takafumi*; Sakata, Shuhei*; Iwano, Hideki*; Maruyama, Seiji*; Chang, Q.*; Miyazaki, Takashi*; et al.
Geochemical Journal, 52(6), p.531 - 540, 2018/12
Times Cited Count:17 Percentile:60.82(Geochemistry & Geophysics)Mitsumi, Minoru*; Ezaki, Kazunari*; Komatsu, Yuki*; Toriumi, Koshiro*; Miyato, Tatsuya*; Mizuno, Motohiro*; Azuma, Nobuaki*; Miyazaki, Yuji*; Nakano, Motohiro*; Kitagawa, Yasutaka*; et al.
Chemistry; A European Journal, 21(27), p.9682 - 9696, 2015/06
Times Cited Count:9 Percentile:29.31(Chemistry, Multidisciplinary)Kuroki, Ryota; Miyazaki, Hiroshi*; Kato, Takashi
Ketsueki Furonteia, 25(2), p.171 - 180, 2015/02
no abstracts in English
Hiraishi, Masatoshi*; Iimura, Soshi*; Kojima, Kenji*; Yamaura, Junichi*; Hiraka, Haruhiro*; Ikeda, Kazutaka*; Miao, P.*; Ishikawa, Yoshihisa*; Torii, Shuki*; Miyazaki, Masanori*; et al.
Nature Physics, 10(4), p.300 - 303, 2014/04
Times Cited Count:106 Percentile:95.15(Physics, Multidisciplinary)Ito, Chikara; Ito, Keisuke; Ishikawa, Takashi; Yoshida, Akihiro; Sanada, Yukihisa; Torii, Tatsuo; Notomi, Akihiro*; Wakabayashi, Genichiro*; Miyazaki, Nobuyuki*
Hoshasen, 39(1), p.7 - 11, 2013/09
no abstracts in English
Makihara, Akiko*; Yokose, Tamotsu*; Tsuchiya, Yoshihisa*; Miyazaki, Yoshio*; Abe, Hiroshi; Shindo, Hiroyuki*; Ebihara, Tsukasa*; Maru, Akifumi*; Morikawa, Koichi*; Kuboyama, Satoshi*; et al.
IEEE Transactions on Nuclear Science, 60(1), p.230 - 235, 2013/02
Times Cited Count:6 Percentile:42.20(Engineering, Electrical & Electronic)no abstracts in English
Strasser, P.*; Shimomura, Koichiro*; Koda, Akihiro*; Kawamura, Naritoshi*; Fujimori, Hiroshi*; Makimura, Shunsuke*; Kobayashi, Yasuo*; Nakahara, Kazutaka*; Kato, Mineo*; Takeshita, Soshi*; et al.
Journal of Physics; Conference Series, 225, p.012050_1 - 012050_8, 2010/06
Times Cited Count:13 Percentile:95.53(Physics, Applied)Yamasaki, Chisato*; Murakami, Katsuhiko*; Fujii, Yasuyuki*; Sato, Yoshiharu*; Harada, Erimi*; Takeda, Junichi*; Taniya, Takayuki*; Sakate, Ryuichi*; Kikugawa, Shingo*; Shimada, Makoto*; et al.
Nucleic Acids Research, 36(Database), p.D793 - D799, 2008/01
Times Cited Count:52 Percentile:70.94(Biochemistry & Molecular Biology)Here we report the new features and improvements in our latest release of the H-Invitational Database, a comprehensive annotation resource for human genes and transcripts. H-InvDB, originally developed as an integrated database of the human transcriptome based on extensive annotation of large sets of fulllength cDNA (FLcDNA) clones, now provides annotation for 120 558 human mRNAs extracted from the International Nucleotide Sequence Databases (INSD), in addition to 54 978 human FLcDNAs, in the latest release H-InvDB. We mapped those human transcripts onto the human genome sequences (NCBI build 36.1) and determined 34 699 human gene clusters, which could define 34 057 protein-coding and 642 non-protein-coding loci; 858 transcribed loci overlapped with predicted pseudogenes.
Fukuda, Mitsuhiro; Okumura, Susumu; Ishii, Yasuyuki; Saito, Yuichi; Miyawaki, Nobumasa; Mizuhashi, Kiyoshi; Agematsu, Takashi; Kurashima, Satoshi; Chiba, Atsuya; Sakai, Takuro; et al.
Dai-14-Kai Kasokuki Kagaku Kenkyu Happyokai Hokokushu, p.302 - 304, 2003/00
no abstracts in English
Kondo, Hitoshi; ; Namekawa, Takashi; ; Miyazaki, Hitoshi; Tanimoto, Kenichi
JNC TN9410 2001-006, 43 Pages, 2000/12
In order to make a contribution to the clearance level decision work of the research facility which handle radioisotope (RI), fuel and so on, the amount of waste from decommissioning the facility was investigated. The investigation were the estimation of the amount of decommissioning waste and the evaluation of the amount of clearance level waste for four facilities which are Fuel Monitorring Facility (FMF), Alpha-Gamma Facility (AGF), Materials Monitoring Facility (MMF), and Waste Dismantling Facility (WDF). The result of estimation and valuation are as follows. (1)The amount of the decommissioning waste for FMF is about 71500 tons. (Concrete is about 67500 tons, metal is about 3,600 tons, and others is about 300 tons.) (2)The amount of the decommissioning waste for AGF is about 14200 tons. (Concrete is about 13300 tons, metal is about 600 tons, and others is about 200 tons.) (3)The amount of the decommissioning waste for MMF is about 18000 tons. (Concrete is about 17100 tons, metal is about 700 tons, and others is about 100 tons.) (4)The amount of the decommissioning waste for WDF is about 28600 tons. (Concrete is about 27900 tons, metal is about 700 tons, and others is about 20 tons.) (5)All concrete waste and over 70% of metal waste is included the clearance level or non-radioactive waste. (6)By excluding a waste under the clearance level from a disassembly waste, the radioactive waste for the decommissioning the facility can be drastically reduced.
Yokoyama, Tatsunori; Kokubu, Yoko; Mitsuguchi, Takehiro; Murakami, Hiroaki; Hirata, Takafumi*; Sakata, Shuhei*; Danhara, Toru*; Iwano, Hideki*; Maruyama, Seiji*; Chang, Q.*; et al.
no journal, ,
no abstracts in English
Yokoyama, Tatsunori; Kokubu, Yoko; Mitsuguchi, Takehiro*; Murakami, Hiroaki; Hirata, Takafumi*; Sakata, Shuhei*; Danhara, Toru*; Iwano, Hideki*; Maruyama, Seiji*; Chang, Q.*; et al.
no journal, ,
no abstracts in English
Miyazaki, Itsuki*; Higemoto, Wataru; Oda, Yuto; Ito, Takashi; Isobe, Masaaki*
no journal, ,
Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi
no journal, ,
Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to cnfirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. In addition, buckling strength evaluated by elasto-plastic buckling analysis had good accuracy compared to each test result by considering the stress-strain relationship and imperfection of test specimen.
Higemoto, Wataru; Okazawa, Takeshi*; Oda, Yuto; Miyazaki, Itsuki*; Ito, Takashi; Yoshida, Yoshiyuki*
no journal, ,