Arokiaswamy, J. A.*; Batra, C.*; Chang, J. E.*; Garcia, M.*; Herranz, L. E.*; Klimonov, I. A.*; Kriventsev, V.*; Li, S.*; Liegeard, C.*; Mahanes, J.*; et al.
IAEA-TECDOC-2006, 380 Pages, 2022/00
The IAEA coordinated research project on "Radioactive Release from the Prototype Sodium Cooled Fast Reactor under Severe Accident Conditions" was devoted to realistic numerical simulation of fission products and fuel particles inventory inside the reference sodium cooled fast reactor volumes under severe accident conditions at different time scales. The scope of analysis was divided into three parts, defined as three work packages (WPs): (1) in-vessel source term estimation; (2) primary system/containment system interface source term estimation; and, (3) in-containment phenomenology analysis. Comparison of the results obtained in WP-1 indicates that the release fractions of noble gases and cesium radionuclides, and fractions of radionuclides released to the cover gas are in a good agreement. In the analysis using a common pressure history in WP-2, the results were in good agreement indicating that the accuracy of the analysis method of each institution is almost the same. The standalone case, which uses a set of pre-defined release fractions, was defined for WP-3 which enables to decouple this part of analysis from previous WPs. There is broad consensus among the predicted results by all the participants in WP-3.
Briggs, L.*; Monti, S.*; Hu, W.*; Sui, D.*; Su, G. H.*; Maas, L.*; Vezzoni, B.*; Partha Sarathy, U.*; Del Nevo, A.*; Petruzzi, A.*; et al.
Proceedings of 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16) (USB Flash Drive), p.3030 - 3043, 2015/08
The International Atomic Energy Agency Coordinated Research Project, "Benchmark Analyses of an EBR-II Shutdown Heat Removal Test" is in the third year of its four-year term. Nineteen participants representing eleven countries have simulated two of the most severe transients performed during the Shutdown Heat Removal Tests program conducted at Argonne's Experimental Breeder Reactor II. Benchmark specifications were created for these two transients, enabling project participants to develop computer models of the core and primary heat transport system, and simulate both transients. In phase 1 of the project, blind simulations were performed and then evaluated against recorded data. During phase 2, participants have refined their models to address areas where the phase 1 simulations did not predict as well as desired the experimental data. This paper describes the progress that has been made to date in phase 2 in improving on the earlier simulations and presents the direction of planned work for the remainder of the project.
Passerini, S.*; Carardi, C.*; Grandy, C.*; Azpitarte, O. E.*; Chocron, M.*; Japas, M. L.*; Bubelis, E.*; Perez-Martin, S.*; Jayaraj, S.*; Roelofs, F.*; et al.
Proceedings of 2015 International Congress on Advances in Nuclear Power Plants (ICAPP 2015) (CD-ROM), p.780 - 790, 2015/05
Pascal, V.*; Prulhire, G.*; Vanier, M.*; Fontaine, B.*; Devan, K.*; Chellapandi, P.*; Kriventsev, V.*; Monti, S.*; Mikityuk, K.*; Chenu, A.*; et al.
Proceedings of International Conference on the Physics of Reactors; The Role of Reactor Physics toward a Sustainable Future (PHYSOR 2014) (CD-ROM), 16 Pages, 2014/09
no abstracts in English
Monti, S.*; Toti, A.*; Stanculescu, A.*; Pascal, V.*; Fontaine, B.*; Herrenschmidt, A.*; Prulhiere, G.*; Vanier, M.*; Varaine, F.*; Vasile, A.*; et al.
IAEA-TECDOC-1742, 247 Pages, 2014/06
Monti, S.*; Latge, C.*; Long, B.*; Azpitarte, O. E.*; Chellapandi, P.*; Stieglitz, R.*; Eckert, S.*; Ohira, Hiroaki; Lee, J.*; Roelofs, F.*; et al.
Proceedings of 2014 International Congress on the Advances in Nuclear Power Plants (ICAPP 2014) (CD-ROM), p.474 - 481, 2014/04
Pascal, V.*; Prulhire, G.*; Fontaine, B.*; Devan, K.*; Chellapandi, P.*; Kriventsev, V.*; Monti, S.*; Mikityuk, K.*; Semenov, M.*; Taiwo, T.*; et al.
Proceedings of 2013 International Congress on Advances in Nuclear Power Plants (ICAPP 2013) (USB Flash Drive), 11 Pages, 2013/04
The control rod withdrawal test was one of the various Phenix End-of-Life tests performed in 2009. The main goal was to determine the impact of a rod insertion and/or extraction on the radial power distribution in the fissile core at nominal power. The framework of the Technical Working Group on Fast Reactors (TWG-FR) activities in IAEA, decided to launch a Coordinated Research Project (CRP), devoted to benchmarking analyses on the test. The CRP was performed by experts coming from CEA, ANL, IGCAR, IPPE, IRSN, JAEA, KIT and PSI. After a short description of the test conducted in the Phenix reactor, this paper presents some results obtained in the course of the CRP with special emphasis on control rod efficiencies and power deformation by subassemblies. The paper also discusses the discrepancies found when comparing calculated results with experimental data as well as some preliminary conclusions on the source of these discrepancies.