Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakasawa, Hayato*; Shobu, Takahisa; Tominaga, Aki; Fujii, Masashi*; Matsumoto, Hironari*; Matsuda, Michiko*; Shimada, Takeshi*; Trivedi, V.*; Tachibana, Makoto*; Tsujii, Naohito*; et al.
Funtai Oyobi Fummatsu Yakin, 72(Suppl.), p.S997 - S1001, 2025/03
Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Sunagawa, Hikaru*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Fujihara, Masayoshi; Tampo, Motonobu*; Kawamura, Naritoshi*; et al.
Interactions (Internet), 245(1), p.31_1 - 31_6, 2024/12
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Ishihara, Takanori; Hakoiwa, Hiroaki; Asamori, Koichi; Murakami, Osamu; Fukuda, Shoma; Ogita, Yasuhiro; Kagami, Saya; et al.
JAEA-Research 2024-013, 65 Pages, 2024/11
This annual report documents the progress of research and development (R&D) in the 2nd fiscal year of the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028) to provide the scientific base for assessing geosphere stability for long-term isolation of high-level radioactive waste. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. The current status of R&D activities with previous scientific and technological progress is summarized.
Niwa, Masakazu; Shimada, Akiomi; Asamori, Koichi; Sueoka, Shigeru; Komatsu, Tetsuya; Nakajima, Toru; Ogata, Manabu; Uchida, Mao; Nishiyama, Nariaki; Tanaka, Kiriha; et al.
JAEA-Review 2024-035, 29 Pages, 2024/09
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2024. The objectives and contents of this research are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.
Morito, Makoto*; Fujii, Shun*; Yoshimura, Koki*; Sanada, Yukihisa; Baba, Shoichiro*; Matsunaga, Hiroshi*; Mori, Takami*; Sato, Keiichiro*; Tahara, Junichiro*
Proceedings of 34th International Ocean and Polar Engineering Conference (ISOPE-2024), p.3754 - 3761, 2024/06
This study proposes a method that combines sliding mode control and neural networks as a control method for unmanned surface vehicle to measure radiation in submarine soil. Sliding mode control is used as the base of control input, and corrective inputs are added using a neural network controller so that one of the parameters of sliding mode control, , and its rate of change are reduced. After producing a control system using this method, we conducted simulation tests and sea area tests to evaluate whether the survey could be conducted using this method.
Mori, Yuichiro*; Kagi, Hiroyuki*; Aoki, Katsutoshi*; Takano, Masahiro*; Kakizawa, Sho*; Sano, Asami; Funakoshi, Kenichi*
Earth and Planetary Science Letters, 634, p.118673_1 - 118673_8, 2024/05
Times Cited Count:1 Percentile:58.96(Geochemistry & Geophysics)To investigate silicon effects on the hydrogen-induced volume expansion of iron, neutron diffraction and X-ray diffraction experiments were conducted to examine hcp-FeSi
under high pressures and high temperatures. Neutron diffraction experiments were performed on the deuterated hcp-Fe
Si
at 13.5 GPa and 900 K, and at 12.1 GPa and 300 K. By combining the P-V-T equation of state of hcp-Fe
Si
, present results indicate that the hydrogen-induced volume expansion of hcp-Fe
Si
is 10% greater than that of pure hcp iron. Using the obtained values, we estimated the hydrogen content that would reproduce the density deficit in the inner core, which was 50% less than that without the effect of silicon. Possible hydrogen content,
, in the inner core and the outer core was calculated to be 0.07 and 0.12-0.15, respectively, when reproducing the density deficit of the inner core with hcp-Fe
Si
Hx.
Zhang, H.*; Umehara, Yutaro*; Yoshida, Hiroyuki; Mori, Shoji*
International Journal of Heat and Mass Transfer, 218, p.124750_1 - 124750_11, 2024/01
Times Cited Count:6 Percentile:63.68(Thermodynamics)Takano, Masahiro*; Kagi, Hiroyuki*; Mori, Yuichiro*; Aoki, Katsutoshi*; Kakizawa, Sho*; Sano, Asami; Iizuka-Oku, Riko*; Tsuchiya, Taku*
Journal of Mineralogical and Petrological Sciences (Internet), 119(1), p.240122_1 - 240122_9, 2024/00
Times Cited Count:0 Percentile:0.00(Mineralogy)Hydrogenation of iron sulfide (FeS) under high-pressure and high-temperature conditions has attracted attention because hydrogen and sulfur are promising candidates as light elements in the cores of the Earth and other terrestrial planets. In earlier reports describing the hydrogenation of FeS, the chemical compositions of starting materials were not fully clarified. This study reports in-situ neutron and X-ray diffraction measurements under high-pressure and high-temperature conditions of an Fe-S-H system using a stochiometric Fe1.000S (troilite) as a starting material. The occupancies determined were significantly lower than those reported from earlier studies, indicating that the hydrogenation of FeS can be affected strongly by the stoichiometry of iron sulfide.
Kawahara, Takahiro; Suda, Shoya; Fujikura, Toshiki; Masai, Seita; Omori, Kanako; Mori, Masakazu; Kurosawa, Tsuyoshi; Ishihara, Keisuke; Hoshi, Akiko; Yokobori, Tomohiko
JAEA-Technology 2023-020, 36 Pages, 2023/12
We have been storing drums containing radioactive waste (radioactive waste packages) at waste storage facilities. We have been managing radioactive waste packages along traditional safety regulations. However, over 40 years has passed from a part of them were brought in pit-type waste storage facility L. Most of them are carbon steel 200 L drums, and surface of them are corroded. For better safety management, we started to take drums out from the pit and inspect them in FY 2019. After each inspection, we repair them or remove the contents of the drum and refill new drums if necessary. In this report, we will introduce the planning, the review of the plan, and the trial operation of this project.
Zhang, H.*; Umehara, Yutaro*; Yoshida, Hiroyuki; Mori, Shoji*
International Journal of Heat and Mass Transfer, 211, p.124253_1 - 124253_13, 2023/09
Times Cited Count:8 Percentile:75.36(Thermodynamics)Kondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
Times Cited Count:23 Percentile:94.90(Multidisciplinary Sciences)no abstracts in English
Wang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.
Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08
Times Cited Count:3 Percentile:64.77(Astronomy & Astrophysics)Detailed -ray spectroscopy of the exotic neon isotope
Ne has been performed using the one-neutron removal reaction from
Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for
Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.
Nonaka, Yosuke*; Wakabayashi, Yuki*; Shibata, Goro; Sakamoto, Shoya*; Ikeda, Keisuke*; Chi, Z.*; Wan, Y.*; Suzuki, Masahiro*; Tanaka, Arata*; Tanaka, Masaaki*; et al.
Physical Review Materials (Internet), 7(4), p.044413_1 - 044413_10, 2023/04
Times Cited Count:5 Percentile:55.08(Materials Science, Multidisciplinary)Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Natori, Hiroaki*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Tampo, Motonobu*; Kawamura, Naritoshi*; Teshima, Natsuki*; et al.
Journal of Physics; Conference Series, 2462, p.012033_1 - 012033_5, 2023/03
Times Cited Count:0 Percentile:0.00(Physics, Applied)Zhang, H.*; Mori, Shoji*; Hisano, Tsutomu*; Yoshida, Hiroyuki
International Journal of Multiphase Flow, 159, p.104342_1 - 104342_15, 2023/02
Times Cited Count:10 Percentile:66.12(Mechanics)Ono, Ayato; Takayanagi, Tomohiro; Fuwa, Yasuhiro; Shinozaki, Shinichi; Ueno, Tomoaki*; Horino, Koki*; Sugita, Moe; Yamamoto, Kazami; Kinsho, Michikazu; Ikoma, Naoya*; et al.
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.395 - 399, 2023/01
At J-PARC, an ignitron is used for the crowbar device of the klystron power supply for high-frequency acceleration of a linear accelerator. Ignitron uses mercury, which is of limited use worldwide, and is expected to be discontinued in the future. Therefore, we designed a semiconductor crowbar switch for short-circuit protection of klystron using a MOS gate thyristor. We have manufactured an oval-type board module that realizes an operating output of 3 kV, 40 kA, and 50 s per board. For the control power supply to each board module assuming a high voltage of 120 kV, we adopted a self-power supply method that creates a control power supply with a high-voltage DCDC converter from the voltage shared and charged by each board module. It was possible to confirm the operating performance on a 1/2 scale (60 kV, 40 kA) against the voltage of the existing equipment (120 kV, 40 kA) by connecting twenty oval board modules in series. The output test result will be reported.
Verma, V.*; Sakamoto, Shoya*; Ishikawa, Koichiro*; Singh, V. R.*; Ishigami, Keisuke*; Shibata, Goro; Kadono, Toshiharu*; Koide, Tsuneharu*; Kuroda, Shinji*; Fujimori, Atsushi*
Physica B; Condensed Matter, 642, p.414129_1 - 414129_5, 2022/10
Times Cited Count:5 Percentile:39.61(Physics, Condensed Matter)Ishii, Yui*; Yamamoto, Arisa*; Sato, Naoki*; Nambu, Yusuke*; Kawamura, Seiko; Murai, Naoki; Ohara, Koji*; Kawaguchi, Shogo*; Mori, Takao*; Mori, Shigeo*
Physical Review B, 106(13), p.134111_1 - 134111_7, 2022/10
Times Cited Count:0 Percentile:0.00(Materials Science, Multidisciplinary)Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.
Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09
Times Cited Count:7 Percentile:77.01(Nuclear Science & Technology)In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.
Omori, Kazuki; Yamauchi, Sho; Yanagibashi, Futoshi; Sasaki, Shunichi; Wada, Takuya; Suzuki, Hisanori; Domura, Kazuyuki; Takeuchi, Kenji
Nihon Hozen Gakkai Dai-18-Kai Gakujutsu Koenkai Yoshishu, p.245 - 248, 2022/07
Tokai Reprocessing Plant (TRP), which is shifted to decommissioning stage, stores large amount of high-level radioactive liquid waste (HLLW). Although TRP is implementing vitrification of HLLW to reduce the risks related to HLLW storage, additional 20 years are required to complete vitrification of HLLW. Therefore, TRP is implementing safety countermeasure related to seismic resistance of HLLW storage facility as one of the top priorities. The results of the seismic evaluation indicate that although the facility itself is seismically resistant, there is a risk of insufficient binding force acting between the facility and the surrounding ground. Thus, replacement of the surrounding ground with concrete is performed. Since the countermeasures, to protect existing buries structure and coordinate with the other construction projects around the site, are required, the dedicated team was setup to handle the process and safety management of the concrete replacement construction.