Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kamiya, Junichiro; Okabe, Kota; Kinsho, Michikazu; Moriya, Katsuhiro; Yamada, Ippei; Ogiwara, Norio*; Hikichi, Yusuke*; Wada, K.*
Journal of Physics; Conference Series, 1350, p.012149_1 - 012149_6, 2019/12
Times Cited Count：3 Percentile：82.21(Physics, Particles & Fields)To obtain a getter effect to titanium vacuum duct surface, the method to remove the oxide on the surface by sputtering with ionized molecules has been developed. In the method, a sheet-shaped gas distribution with a uniform and high density is generated through a narrow slit by a small amount of gas. In this report, the gas density distribution was calculated by the Monte Carlo simulation code. As a result, it was found that a gas injection from both directions was effective to generate uniform density distribution. Furthermore, the gas injection method was applied to a non-destructive beam profile monitor, that detects ions generated by the interaction between gas molecules and beam. In this monitor, dependence of the beam profile on the injected gas amount was measured. A small amount of injected gas was found to be ideal for the beam profile measurements in the unsaturated and a high S/N ratio region.
Moriya, Katsuhiro; Kawane, Yusuke*; Miura, Akihiko; Futatsukawa, Kenta*; Miyao, Tomoaki*
Journal of Physics; Conference Series, 1067, p.072009_1 - 072009_3, 2018/09
Times Cited Count：0 Percentile：0.11(Physics, Particles & Fields)no abstracts in English
Miura, Akihiko; Kawane, Yusuke*; Moriya, Katsuhiro; Futatsukawa, Kenta*; Miyao, Tomoaki*; Fukuoka, Shota*
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.2183 - 2186, 2018/06
In order to mitigate the beam loss during a beam transportation in the high-brilliant accelerator facilities, wire-based profile monitors are used to measure by both transverse and longitudinal beam profiles using wire-scanner monitors and bunch-shape monitors for the tuning of quadrupole magnets and buncher cavities. Signals are generated due to the direct interaction between a metallic wire and beam. We have used the tungsten wire as a high melting-point material by estimation of heat loading during the impact of beam particles. In addition, a spring is applied for the relaxing a flexure under wire's own weight. A tensile fracture test is conducted by supplying an electrical current as a simulated beam loading. As the results, we obtained the relation between the thermal limit to fracture and tension loading of tungsten wire.
Tochiyama, Osamu*; Niibori, Yuichi*; Tanaka, Koichi*; Moriya, Yusuke*; Yui, Mikazu; Shibata, Masahiro; Tetsu, Takeshi*
JNC TY8400 2002-014, 129 Pages, 2002/05
JNC-TY8400-2002-014.pdf:2.35MB
None
