Development of the buckling evaluation method for large scale vessels in fast reactors by the testing of Grade 91 steel and austenitic stainless steel vessels subjected to horizontal and cyclic vertical loading

Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Okajima, Satoshi

Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 8 Pages, 2023/07

Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Gr.91 and austenitic stainless steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively.

Development of the buckling evaluation method for large scale vessel in fast reactors by the testing of austenitic stainless steel vessel with severe initial imperfection subjected to horizontal and vertical loading

Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Okajima, Satoshi

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 9 Pages, 2022/07

Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of austenitic stainless steel. The buckling modes and strength data in the load region where the interaction of cyclic axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. Moreover, a series of finite element analyzes to confirm the applicability of the evaluation method in 2.25Cr-1Mo steel and up to 650 C were conducted.

Development of the buckling evaluation method for large scale vessel by the testing of Gr.91 vessel subjected to vertical and horizontal loading

Okafuji, Takashi*; Miura, Kazuhiro*; Sago, Hiromi*; Murakami, Hisatomo*; Ando, Masanori; Miyazaki, Masashi

Proceedings of ASME 2020 Pressure Vessels and Piping Conference (PVP 2020) (Internet), 9 Pages, 2020/08

https://doi.org/10.1115/PVP2020-21328

Buckling evaluation methods capable of evaluating elasto-plastic buckling under axial compression, bending, and shear loads are required for cylindrical vessels of fast reactors to cope with thinning due to increasing diameter and application to the seismic isolation design against huge seismic ground motion. In this study, in order to confirm the applicability of the proposal evaluation method, several buckling tests and FE analyses were carried out using the specimens made of Modified 9Cr-1Mo steel. The buckling modes and strength data in the load region where the interaction of axial compression, bending and shear buckling could occur were examined. As a result, it was confirmed that the proposal evaluation method estimated the buckling load in the tests conservatively. In addition, buckling strength evaluated by elasto-plastic buckling analysis had good accuracy compared to each test result by considering the stress-strain relationship and imperfection of test specimen.

Determination of fusion barrier distributions from quasielastic scattering cross sections towards superheavy nuclei synthesis

Tanaka, Taiki*; Narikiyo, Yoshihiro*; Morita, Kosuke*; Fujita, Kunihiro*; Kaji, Daiya*; Morimoto, Koji*; Yamaki, Sayaka*; Wakabayashi, Yasuo*; Tanaka, Kengo*; Takeyama, Mirei*; et al.

Journal of the Physical Society of Japan, 87(1), p.014201_1 - 014201_9, 2018/01

https://doi.org/10.7566/JPSJ.87.014201

Excitation functions of quasielastic scattering cross sections for the Ca + Pb, Ti + Pb, and Ca + Cm reactions were successfully measured by using the gas-filled recoil-ion separator GARIS. Fusion barrier distributions were extracted from these data, and compared with the coupled-channels calculations. It was found that the peak energies of the barrier distributions for the Ca + Pb and Ti + Pb systems coincide with those of the 2n evaporation channel cross sections for the systems, while that of the Ca + Cm is located slightly below the 4n evaporation ones. This results provide us helpful information to predict the optimum beam energy to synthesize superheavy nuclei.

Complex chemistry with complex compounds

Eichler, R.*; Asai, Masato; Brand, H.*; Chiera, N. M.*; Di Nitto, A.*; Dressler, R.*; Dllmann, Ch. E.*; Even, J.*; Fangli, F.*; Goetz, M.*; et al.

EPJ Web of Conferences, 131, p.07005_1 - 07005_7, 2016/12

https://doi.org/10.1051/epjconf/201613107005

In recent years gas-phase chemical studies assisted by physical pre-separation allowed for the productions and investigations of fragile single molecular species of superheavy elements. The latest highlight is the formation of very volatile hexacarbonyl compound of element 106, Sg(CO). Following this success, second-generation experiments were performed to measure the first bond dissociation energy between the central metal atom and the surrounding ligand. The method using a tubular decomposition reactor was developed and successfully applied to short-lived Mo(CO), W(CO), and Sg(CO).

Estimation of the lifetime of resin insulators against baking temperature for JT-60SA in-vessel coils

Sukegawa, Atsuhiko; Murakami, Haruyuki; Matsunaga, Go; Sakurai, Shinji; Takechi, Manabu; Yoshida, Kiyoshi; Ikeda, Yoshitaka

Fusion Engineering and Design, 98-99, p.2076 - 2079, 2015/10

https://doi.org/10.1016/j.fusengdes.2015.06.018

The JT-60SA project is a EU - JA satellite tokamak under Broader Approach in support of the ITER project. In-vessel coils are designed and assembled by JA. The resin-insulator is required to have a heat resistance against the baking temperature of vacuum vessel of 200C (40000 hour). Thus the assessment of the heat load is fundamental for the design of the coils. However, the estimation of the lifetime of resin-insulator under the high-temperature region has not been examined. In the present study, the estimation of the lifetime of seven candidate resin-insulators such as epoxy resin and cyanate-ester resin under the 220C temperature region have been performed for the current coils design. Weight reduction of the seven candidate insulators was measured at different heating times under 180C, 200C and 220C environment using three thermostatic ovens, respectively. The reduction of the insulators has been used as input for Weibull-analysis towards Arrhenius-plot. Lifetime of the resins has been estimated for the first time at the high temperature region by the plot. Lifetime of the resin-insulators have been evaluated and discussed as well as the available temperature of the in-vessel coils.

Production of Nb and Ta for chemical studies of element 105, Db, using the GARIS gas-jet system

Huang, M.*; Haba, Hiromitsu*; Murakami, Masashi*; Asai, Masato; Kaji, Daiya*; Kanaya, Jumpei*; Kasamatsu, Yoshitaka*; Kikunaga, Hidetoshi*; Kikutani, Yuki*; Komori, Yukiko*; et al.

Journal of Radioanalytical and Nuclear Chemistry, 304(2), p.845 - 849, 2015/05

https://doi.org/10.1007/s10967-014-3877-4

A technique to utilize radioisotopes of Nb and Ta was developed for chemical studies of element 105, Db, by coupling a gas-jet transport system to the RIKEN gas-filled recoil ion separator (GARIS). The short-lived Nb and Ta were produced with nuclear reactions using a F beam whose energy was the same as that to produce Db. Then, they were separated with GARIS and extracted to a chemistry laboratory with the gas-jet transport system. By changing only magnetic field of GARIS and inserting an energy degrader and a shutter for recoil ions, we could deliver the Nb and Ta to a chemistry device for Db without changing other experimental conditions.

In situ synthesis of volatile carbonyl complexes with short-lived nuclides

Even, J.*; Ackermann, D.*; Asai, Masato; Block, M.*; Brand, H.*; Di Nitto, A.*; Dllmann, Ch. E.*; Eichler, R.*; Fan, F.*; Haba, Hiromitsu*; et al.

Journal of Radioanalytical and Nuclear Chemistry, 303(3), p.2457 - 2466, 2015/03

https://doi.org/10.1007/s10967-014-3793-7

Rapid In situ synthesis of metal carbonyl complexes has been demonstrated using short-lived isotopes produced in nuclear fission and fusion reactions. The short-lived isotopes with high recoil energy directly react with carbon-monoxides and form carbonyl complexes. Only highly volatile complexes were fast transported in a gas stream to counting and chemistry devices. Short-lived Mo, Tc, Ru, Rh, W, Re, Os, and Ir were found to form volatile carbonyl complexes, while no volataile complex of Hf and Ta were detected. This technique has been applied to a chemical investigation of the superheavy element Sg (atomic number 106), and will be applicable to various fields of nuclear science with short-lived transition metal isotopes.

Synthesis and detection of a Seaborgium carbonyl complex

Even, J.*; Yakushev, A.*; Dllmann, Ch. E.*; Haba, Hiromitsu*; Asai, Masato; Sato, Tetsuya; Brand, H.*; Di Nitto, A.*; Eichler, R.*; Fan, F. L.*; et al.

Science, 345(6203), p.1491 - 1493, 2014/09

https://doi.org/10.1126/science.1255720

A new superheavy element complex, a seaborgium carbonyl, has been successfully synthesized, and its adsorption property has been studied using a cryo-thermochromatography and -detection apparatus COMPACT. Nuclear reaction products of short-lived Sg preseparated with a gas-filled recoil ion separator GARIS at RIKEN were directly injected into a gas cell filled with He/CO mixture gas, and chemical reaction products of volatile carbonyl complexes were trasported to COMPACT. The Sg carbonyl complex detected with COMPACT was found to be very volatile with adsorption enthalpy of 50 kJ/mol, from which we have concluded that this complex should be a Sg hexacarbonyl Sg(CO). This is the first synthesis of organometallic compounds of transactinide elements for which only simple inorganic comounds have been synthesized so far.

Engineering scale development test of MOX fuel fabrication technology to establish commercialized fast reactor fuel, 1; The O/M ratio preparation tests of sintered pellets

Takato, Kiyoto; Murakami, Tatsutoshi; Suzuki, Kiichi; Shibanuma, Kimikazu; Hatanaka, Nobuhiro; Yamaguchi, Bungo; Tobita, Yoshimasa; Shinozaki, Masaru; Iimura, Naoto; Okita, Takatoshi; et al.

JAEA-Technology 2013-026, 42 Pages, 2013/10

JAEA-Technology-2013-026.pdf:3.17MB

In order to cope with making a commercial fast reactor fuel burn-up higher, oxygen-to-metal (O/M) ratio in the fuel specification is designed to 1.95. As the test for the fabrication of such low O/M ratio pellets, two kinds of O/M ratio preparation tests of different reduction mechanism were done. In the first test, we evaluated the technology to prepare the O/M ratio low by annealing the sintered pellets in production scale. In addition, we know from past experience that O/M ratio of the sintered pellets can be reduced by residual carbon when the de-waxed pellets with high carbon content are sintered. Thus, in another test, the green pellets containing a large amount of organic additives were sintered and we evaluated the technology to produce the low O/M ratio sintered pellets by the reduction due to residual carbon. From the first test results, we found a tendency that the higher annealing temperature or the longer annealing time resulted in the lower O/M ratio. However, the amount of O/M ratio reduction was small and it is estimated that a substantial annealing time is necessary to prepare the O/M ratio to 1.95. It is considered that reducing O/M ratio by annealing was difficult because atmosphere gas containing oxygen released from pellets remained and the O/M ratio was changed to the value equilibrated with the gas having high oxygen potential. From another test results, it was confirmed that O/M ratio was reduced by the reduction due to residual carbon. We found that it was important to manage an oxygen potential of atmosphere gas in a sintering furnace low to reduce the O/M ratio effectively.