Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Doda, Norihiro; Nakamine, Yoshiaki*; Yoshimura, Kazuo; Kuwagaki, Kazuki; Hamase, Erina; Yokoyama, Kenji; Kikuchi, Norihiro; Mori, Takero; Hashidate, Ryuta; Tanaka, Masaaki
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 29, 6 Pages, 2024/06
As a part of the development of the "Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant lifecycle (ARKADIA)" to utilize the knowledge obtained through the sodium-cooled fast reactors (SFRs) and combine the latest numerical simulation technologies, ARKADIA-Design is being developed to support the optimization of SFRs in the conceptual design stage. ARKADIA-Design consists of three systems of Virtual Plant Life System (VLS), Enhanced and AI-aided optimization System (EAS), and Knowledge Management System (KMS). A design optimization framework controls the linkage among the three systems through the interfaces in each system. In this study, we have developed a prototype of the framework for core design optimization using the coupled analysis functions in VLS and optimization control function in the linkage of EAS and VLS to investigate the applicability of the framework to the SFR design optimization process.
Yoshimura, Kazuo; Doda, Norihiro; Nakamine, Yoshiaki*; Fujisaki, Tatsuya*; Igawa, Kenichi*; Iida, Masaki*; Tanaka, Masaaki
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
In Japan Atomic Energy Agency, a virtual plant model of the sodium-cooled fast reactor plant composed in a computer is being developed to reduce the development cost, by replacing the experiments to the numerical simulations with coupled analyses of the physical phenomena accounting for the interaction between components under various plant conditions. Through the numerical analysis of the ULOHS test in the U.S. experimental fast reactor named EBR-II, applicability of the virtual plant model was confirmed in comparison with the measured data including the core inlet temperature and the reactor power.
Doda, Norihiro; Nakamine, Yoshiaki*; Kuwagaki, Kazuki; Hamase, Erina; Kikuchi, Norihiro; Yoshimura, Kazuo; Matsushita, Kentaro; Tanaka, Masaaki
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 28, 5 Pages, 2023/05
As a part of the development of the "Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant lifecycle (ARKADIA)" to automatically optimize the life cycle of innovative nuclear reactors including fast reactors, ARKADIA-design is being developed to support the optimization of fast reactor in the conceptual design stage. ARKADIA-Design consists of three systems (Virtual plant Life System (VLS), Evaluation assistance and Application System (EAS), and Knowledge Management System (KMS)). A design optimization framework controls the connection between the three systems through the interfaces in each system. This paper reports on the development of an optimization analysis control function that performs design optimization analysis combining plant behavior analysis by VLS and optimization study by EAS.
Doda, Norihiro; Nakamine, Yoshiaki*; Igawa, Kenichi*; Iwasaki, Takashi*; Murakami, Satoshi*; Tanaka, Masaaki
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 27, 6 Pages, 2022/06
As a part of the development of the "Advanced Reactor Knowledge- and AI-aided Design Integration Approach through the whole plant lifecycle (ARKADIA)" to automatically optimize the life cycle of innovative nuclear reactors including fast reactors, ARKADIA-design is being developed to support the optimization of fast reactor design in the conceptual stage. ARKADIA-Design consists of three systems (Virtual plant Life System (VLS), Evaluation assistance and Application System (EAS), and Knowledge Management System (KMS)). A design optimization framework controls the cooperation between the three systems through the interfaces in each system. This paper reports on the development status of the "VLS interface," which has a control function of coupling analysis codes in VLS.
Ito, Kei; Ezure, Toshiki; Ohshima, Hiroyuki; Kawamura, Takumi*; Nakamine, Yoshiaki*
Proceedings of 9th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-9) (CD-ROM), 6 Pages, 2014/11
The authors have been studied the vortex cavitation in sodium-cooled fast reactors. In this paper, the authors present a modified evaluation method for vortex cavitation, in which a surface tension is modeled mechanistically. Namely, the cavity radius is calculated in consideration of radial pressure distribution, saturated vapor pressure and the pressure jump condition at an interface. As the basic validation of the developed surface tension model, numerical analyses of a simple experiment under various velocity conditions are performed. The evaluation results give qualitatively appropriate tendency, that is, the cavity radius becomes larger with the higher liquid velocity and/or lower reference pressure which cause the larger pressure drop at the vortex. In addition, the authors evaluate the influence of the kinematic viscosity which plays an important role in the vortex cavitation occurrences in the experiments.
Ito, Kei; Ezure, Toshiki; Ohno, Shuji; Kamide, Hideki; Nakamine, Yoshiaki*; Imai, Yasutomo*
JAEA-Research 2013-007, 75 Pages, 2013/10
In Japan Atomic Energy Agency (JAEA), various thermal hydraulics phenomena in an upper plenum region are evaluated in the study on the safety design criteria of the sodium-cooled fast reactor in Japan (JSFR). The gas entrainment (GE) from a free surface of coolant and the vortex cavitation (VC) at the H/L intake are important phenomena to be evaluated. Since these phenomena occur by the significant pressure drop in the vicinity of a vortex center, a technique to evaluate a vortex behavior is indispensable. The authors are developing a GE evaluation method using a numerical analysis and a vortex model. In this study, the evaluations are performed on the GE behavior in the 1/1.8 scaled water model test. In addition, a VC evaluation method is proposed on the basis of the GE evaluation method. As a basic validation of the VC evaluation method, the basic sub-surface vortex test in JAEA is evaluated.
Ito, Kei; Ohshima, Hiroyuki; Nakamine, Yoshiaki*; Imai, Yasutomo*
Journal of Power and Energy Systems (Internet), 6(2), p.151 - 164, 2012/06
Suppression of gas entrainment (GE) phenomena caused by free surface vortices are very important to establish an economically superior design of the sodium-cooled fast reactor in Japan (JSFR). Therefore, the authors are developing a CFD-based evaluation method in which the non-linearity and locality of the GE phenomena can be considered. In this study, the authors develop a turbulent vortex model to evaluate the GE phenomena more accurately. Then, the improved GE evaluation method with the turbulent viscosity model is validated by analyzing the GC lengths observed in a simple experiment. The evaluation results show that the GC lengths analyzed by the improved method are shorter in comparison to the original method, and give better agreement with the experimental data.
Ito, Kei; Ezure, Toshiki; Ohno, Shuji; Nakamine, Yoshiaki*; Kawamura, Takumi*
no journal, ,
In Japan Atomic Energy Agency, an evaluation method for the submerged-vortex cavitation at a pipe intake has been examined as a part of the establishment of the safety design criteria for a sodium-cooled fast reactor. The submerged-vortex cavitation is nonlinear and highly complicated phenomenon, and therefore it is difficult to predict the occurrence condition based on the macroscopic quantities, e.g. the flow rate. In this study, the authors proposes a new evaluation method based on a three-dimensional CFD.
Ito, Kei; Ezure, Toshiki; Ohshima, Hiroyuki; Kawamura, Takumi*; Nakamine, Yoshiaki*
no journal, ,
The prevention of vortex cavitation is one of key factors in the safety design criteria for sodium-cooled fast reactors. Therefore, the authors have developed a CFD-based evaluation method to determine the occurrence of the vortex cavitation. In this paper, the accuracy of the evaluation method is enhanced by developing a surface tension model by which the cavity radius is calculated in consideration of radial pressure distribution, saturated vapor pressure and the pressure jump condition at an interface. As a basic validation of the developed surface tension model, numerical analyses of a simple experiment under various velocity and pressure conditions are performed. The evaluation results give qualitatively appropriate cavity radius which becomes larger with the higher liquid velocity and/or lower reference pressure. Therefore, the developed surface tension model is considered to be physically-appropriate.