Physical protection corrective action program activities in JAEA

Shibata, Ryodai; Amano, Tsukasa; Yamada, Hiroyuki; Miyaji, Noriko; Nakamura, Hironobu

Dai-44-Kai Nihon Kaku Busshitsu Kanri Gakkai Nenji Taikai Kaigi Rombunshu (Internet), 4 Pages, 2023/11

In April 2020, JAEA has been introduced Physical Protection Corrective Action Program (PPCAP) with full-scale. It was needed to introduce unified operation for six sites with different business scales, and headquarters developed the common guideline. There was an impression that physical protection activities were carried out by a limited number of employees. Therefore, a problem was to root and activate PPCAP activities among all employees in order to make them effective. Five activities were implemented to solve this problem. As a result, more than 3,700 condition reports (CR) have been collected for 4 years. This paper reports on the activities related to the PPCAP that have been implemented at JAEA.

Crystallinity in periodic nanostructure surface on Si substrates induced by near- and mid-infrared femtosecond laser irradiation

Miyagawa, Reina*; Kamibayashi, Daisuke*; Nakamura, Hirotaka*; Hashida, Masaki*; Zen, H.*; Somekawa, Toshihiro*; Matsuoka, Takeshi*; Ogura, Hiroyuki*; Sagae, Daisuke*; Seto, Yusuke*; et al.

Scientific Reports (Internet), 12, p.20955_1 - 20955_8, 2022/12

https://doi.org/10.1038/s41598-022-25365-1

We evaluated Laser-Induced Periodic Surface Structure (LIPSS) crystal structures using the stress imaging station at BL22XU of JAEA-BL on SPring-8. Crystallization of LIPPS was used different two types laser these are Ti:Sapphire laser (wavelength: 800 nm) and MIR-FEL (mid-infrared free electron laser, wavelength 11.4 m). These lasers are different in the laser pulse structure and the wavelength. We investigated on the effects of formed LIPSS crystallization using different kind of laser. Measured synchrotron X-ray energy is 30 keV and beam size is 20 m. Detector of diffracted X-ray is two-dimensional detector (PILATUS300K, DECTRIS). LIPSS formed using Ti:Sapphire laser has deformed structure with good crystallinity. LIPSS formed using MIR-FEL has dislocation or fault without structural stress. These results show depending on select of laser forming LIPPS structure. These information becomes important a point of the functional application of LIPSS.

MIRS: an imaging spectrometer for the MMX mission

Barucci, M. A.*; Reess, J.-M.*; Bernardi, P.*; Doressoundiram, A.*; Fornasier, S.*; Le Du, M.*; Iwata, Takahiro*; Nakagawa, Hiromu*; Nakamura, Tomoki*; Andr, Y.*; et al.

Earth, Planets and Space (Internet), 73(1), p.211_1 - 211_28, 2021/12

https://doi.org/10.1186/s40623-021-01423-2

The MMX InfraRed Spectrometer (MIRS) is an imaging spectrometer on board of MMX JAXA mission. MIRS is built at LESIA-Paris Observatory in collaboration with four other French laboratories, collaboration and financial support of CNES and close collaboration with JAXA and MELCO. The instrument is designed to fully accomplish MMX's scientific and measurement objectives. MIRS will remotely provide near-infrared spectral maps of Phobos and Deimos containing compositional diagnostic spectral features that will be used to analyze the surface composition and to support the sampling site selection. MIRS will also study Mars atmosphere, in particular to spatial and temporal changes such as clouds, dust and water vapor.

Efforts of procurement and quality managements for physical protection system in JAEA

Shibata, Ryodai; Yamazaki, Katsuyuki; Yamada, Hiroyuki; Miyaji, Noriko; Nakamura, Hironobu

Dai-42-Kai Nihon Kaku Busshitsu Kanri Gakkai Nenji Taikai Kaigi Rombunshu (Internet), 4 Pages, 2021/11

Physical protection systems (PPS) operated for security in nuclear facilities uses computer-controlled systems. If malicious peoples change program or install computer virus to PPS, they are invalidated. Due to insufficient surveillance etc., and then unauthorized removal and sabotage may be caused. This paper introduces efforts of necessary procurement and quality managements etc., for decreasing there affect, and their details.

Study on eutectic melting behavior of control rod materials in core disruptive accidents of sodium-cooled fast reactors, 1; Project overview and progress until 2019

Yamano, Hidemasa; Takai, Toshihide; Furukawa, Tomohiro; Kikuchi, Shin; Emura, Yuki; Kamiyama, Kenji; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; et al.

Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 11 Pages, 2021/08

https://doi.org/10.1115/ICONE28-63301

One of the key issues in a core disruptive accident (CDA) evaluation in sodium-cooled fast reactors is eutectic reactions between boron carbide (BC) and stainless steel (SS) as well as its relocation. Such behaviors have never been simulated in CDA numerical analyses in the past, therefore it is necessary to develop a physical model and incorporate the model into the CDA analysis code. This study focuses on BC-SS eutectic melting experiments, thermophysical property measurement of the eutectic melt, and physical model development for the eutectic melting reaction. The eutectic experiments involve the visualization experiments, eutectic reaction rate experiments and material analyses. The thermophysical properties are measured in a range from solid to liquid state. The physical model is developed for a CDA computer code based on the measured data of the eutectic reaction rate and the physical properties. This paper describes the project overview and progress of experimental and analytical studies conducted until 2019. Specific results in this paper are the validation of physical model describing BC-SS eutectic reaction in the CDA analysis code, SIMMER-III, through the numerical analysis of the BC-SS eutectic melting experiments in which a BC block was placed in a SS pool.

Pressure dependence of ferromagnetic phase boundary in BaVSe studied with high-pressure SR

Sugiyama, Jun; Higemoto, Wataru; Andreica, D.*; Forslund, O. K.*; Nocerino, E.*; Mnsson, M.*; Sassa, Y.*; Gupta, R.*; Khasanov, R.*; Ota, Hiroto*; et al.

Physical Review B, 103(10), p.104418_1 - 104418_10, 2021/03

https://doi.org/10.1103/PhysRevB.103.104418

The magnetic nature of a quasi-one-dimensional compound, BaVSe, has been investigated with positive muon spin rotation and relaxation measurements at ambient and high pressures. At ambient pressure, the spectrum recorded under zero external magnetic field exhibited a clear oscillation below the Curie temperature due to the formation of quasistatic ferromagnetic order. As pressure increased from ambient pressure, was found to decrease slightly up to about 1.5 GPa, at which point started to increase rapidly with the further increase of the pressure. Based on a strong ferromagnetic interaction along the -axis, the result revealed that there are two magnetic interactions in the ab-plane.

Microscopic analyses on Zr adsorbed IDA chelating resin by PIXE and EXAFS

Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nomura, Kazunori; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Hagura, Naoto*; Kubota, Toshio*

Nuclear Instruments and Methods in Physics Research B, 477, p.54 - 59, 2020/08

https://doi.org/10.1016/j.nimb.2019.10.028

scattering length from photoproduction on the proton near the reaction threshold

Ishikawa, Takatsugu*; Fujimura, Hisako*; Fukasawa, Hiroshi*; Hashimoto, Ryo*; He, Q.*; Honda, Yuki*; Hosaka, Atsushi; Iwata, Takahiro*; Kaida, Shun*; Kasagi, Jirota*; et al.

Physical Review C, 101(5), p.052201_1 - 052201_6, 2020/05

https://doi.org/10.1103/PhysRevC.101.052201

The -electron state of the heavy fermion superconductor NpPdAl and the isostructural family

Metoki, Naoto; Aczel, A. A.*; Aoki, Dai*; Chi, S.*; Fernandez-Baca, J. A.*; Griveau, J.-C.*; Hagihara, Masato*; Hong, T.*; Haga, Yoshinori; Ikeuchi, Kazuhiko*; et al.

JPS Conference Proceedings (Internet), 30, p.011123_1 - 011123_6, 2020/03

https://doi.org/10.7566/JPSCP.30.011123

Rare earths (4) and actinides (5) provide variety of interesting states realized with competing interactions between the increasing number of electrons. Since crystal field splitting of many-body electron system is smaller than the bandwidth, (1) high resolution experiments are needed, (2) essentially no clear spectrum with well defined peaks is expected in itinerant Ce and U compounds, and (3) Np and Pu is strictly regulated. Therefore, systematic research on magnetic excitations by neutron scattering experiments of localized compounds and rare earth iso-structural reference is useful. We describe the electron states of heavy electron compounds NpPdAl and actinide and rare earth based iso-structural family.

Study on eutectic melting behavior of control rod materials in core disruptive accidents of sodium-cooled fast reactors, 1; Project overview

Yamano, Hidemasa; Takai, Toshihide; Furukawa, Tomohiro; Kikuchi, Shin; Emura, Yuki; Kamiyama, Kenji; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; et al.

Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.418 - 427, 2019/09

Eutectic reactions between boron carbide (BC) and stainless steel (SS) as well as its relocation are one of the key issues in a core disruptive accident (CDA) evaluation in sodium-cooled fast reactors. Since such behaviors have never been simulated in CDA numerical analyses, it is necessary to develop a physical model and incorporate the model into the CDA analysis code. This study is focusing on BC-SS eutectic melting experiments, thermophysical property measurement of the eutectic melt, and physical model development for the eutectic melting reaction. The eutectic experiments involve the visualization experiments, eutectic reaction rate experiments and material analyses. The thermophysical properties are measured in the range from solid to liquid state. The physical model is developed for a severe accident computer code based on the measured data of the eutectic reaction rate and the physical properties. This paper describes the project overview and progress of experimental and analytical studies by 2017. Specific results in this paper is boron concentration distributions of solidified BC-SS eutectic sample in the eutectic melting experiments, which would be used for the validation of the eutectic physical model implemented into the computer code.