Vibration tests for failure mode analysis of piping system toward Natech risk assessment

Takito, Kiyotaka; Furuya, Osamu*; Nakamura, Izumi*; Okuda, Yukihiko

Proceedings of the ASME 2025 Pressure Vessels & Piping Conference (PVP2025) (Internet), 10 Pages, 2025/07

Natech stands for Natural Hazard Triggered Technological Accidents. The assessment of Natech and the implementation of appropriate measures have been highlighted by the accidents at the Fukushima Daiichi Nuclear Power Plant (NPP), and the gas tank fire caused by the earthquake in Japan. However, the data related to the structural failure with the system function is not sufficient to carry out the assessment of Natech in industrial plants, not only at NPPs. Therefore, the authors have investigated piping failure modes under seismic input to refer to the relationship between piping failure modes and assurance of piping function. Moreover, the authors have already performed the elbow and tee loading tests, the shaking table tests on a simple piping system to observe the referred failure modes of small-bore carbon steel piping. As a result, the authors have shown two of the referred modes are an elbow collapse and the axial crack growth of an elbow. In addition, it observed bifurcating into collapse mode and low cycle fatigue mode due to the relation between the dead load and input acceleration level. Consequently, to observe the failure modes under more realistic configurations, the authors fabricated a three-dimensional pipe specimen with multiple elbows and performed vibration tests using the vibration table in this study. The test specimen was designed to observe an elbow collapse or the axial crack growth on an elbow and under shaking table test. From the above, this paper reports the overview of this study and the results of the vibration tests. Especially, it shows the observed two different failure modes, axial plus circumferential crack and not just an elbow collapse but the overall fall including deformation of multiple elements under the shaking table tests.

Pulsed muon facility of J-PARC MUSE

Shimomura, Koichiro*; Koda, Akihiro*; Pant, A. D.*; Sunagawa, Hikaru*; Fujimori, Hiroshi*; Umegaki, Izumi*; Nakamura, Jumpei*; Fujihara, Masayoshi; Tampo, Motonobu*; Kawamura, Naritoshi*; et al.

Interactions (Internet), 245(1), p.31_1 - 31_6, 2024/12

https://doi.org/10.1007/s10751-024-01863-8

Development of failure mitigation technologies for improving resilience of nuclear structures

Kasahara, Naoto*; Yamano, Hidemasa; Nakamura, Izumi*; Demachi, Kazuyuki*; Sato, Takuya*; Ichimiya, Masakazu*

International Journal of Pressure Vessels and Piping, 211, p.105298_1 - 105298_6, 2024/10

https://doi.org/10.1016/j.ijpvp.2024.105298

Circular polarization measurement for individual gamma rays in capture reactions with intense pulsed neutrons

Endo, Shunsuke; Abe, Ryota*; Fujioka, Hiroyuki*; Ino, Takashi*; Iwamoto, Osamu; Iwamoto, Nobuyuki; Kawamura, Shiori*; Kimura, Atsushi; Kitaguchi, Masaaki*; Kobayashi, Ryuju*; et al.

European Physical Journal A, 60(8), p.166_1 - 166_10, 2024/08

https://doi.org/10.1140/epja/s10050-024-01392-6

Damage status definition of piping system in industrial plants for mitigation of natech risk due to closure on elbows

Takito, Kiyotaka; Okuda, Yukihiko; Nakamura, Izumi*; Furuya, Osamu*

Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 10 Pages, 2024/03

no abstracts in English

Upgrade of seismic design procedure for piping systems based on elastic-plastic response analysis

Nakamura, Izumi*; Otani, Akihito*; Okuda, Yukihiko; Watakabe, Tomoyoshi; Takito, Kiyotaka; Okuda, Takahiro; Shimazu, Ryuya*; Sakai, Michiya*; Shibutani, Tadahiro*; Shiratori, Masaki*

Dai-10-Kai Kozobutsu No Anzensei, Shinraisei Ni Kansuru Kokunai Shimpojiumu (JCOSSAR2023) Koen Rombunshu (Internet), p.143 - 149, 2023/10

https://doi.org/10.60316/jcossar.10.0_143

In 2019, the JSME Code Case for seismic design of nuclear power plant piping systems was published. The Code Case provides the strain-based fatigue criteria and detailed inelastic response analysis procedure as an alternative design rule to the current seismic design, which is based on the stress evaluation by elastic response analysis. In 2022, it was approved to revise the Code Case with improving the cycle counting method for fatigue evaluation to the Rain flow method. In addition, the discussion to incorporate the elastic-plastic behavior of support structures is now in progress for the next revision of the Code Case. This paper discusses the contents and background of the 2022 revision, the progress of the next revision, and future tasks.

Development of nondestructive elemental analysis system for Hayabusa2 samples using muonic X-rays

Osawa, Takahito; Nagasawa, Shunsaku*; Ninomiya, Kazuhiko*; Takahashi, Tadayuki*; Nakamura, Tomoki*; Wada, Taiga*; Taniguchi, Akihiro*; Umegaki, Izumi*; Kubo, Kenya*; Terada, Kentaro*; et al.

ACS Earth and Space Chemistry (Internet), 7(4), p.699 - 711, 2023/04

https://doi.org/10.1021/acsearthspacechem.2c00303

The concentrations of carbon and other major elements in asteroid samples provide very important information on the birth of life on the Earth and the solar-system evolution. Elemental analysis using muonic X-rays is one of the best analytical methods to determine the elemental composition of solid materials, and notably, is the only method to determine the concentration of light elements in bulk samples in a non-destructive manner. We developed a new analysis system using muonic X-rays to measure the concentrations of carbon and other major elements in precious and expectedly tiny samples recovered from the asteroid Ryugu by spacecraft Hayabusa2. Here we report the development process of the system in 4 stages and their system configurations, The analysis system is composed of a stainless-steel analysis chamber, an acrylic glove box for manipulating asteroid samples in a clean environment, and Ge semiconductor detectors arranged to surround the analysis chamber. The performance of the analysis system, including the background level, which is crucial for the measurement, was greatly improved from the first stage to the later ones. Our feasibility study showed that the latest model of our muonic X-ray analysis system is capable of determining the carbon concentration in Hayabusa2's sample model with an uncertainty of less than 10 percent in a 6-day measurement.

Evaluation of detector performances of new thin position-sensitive scintillation detectors for SENJU diffractometer

Nakamura, Tatsuya; To, Kentaro; Koizumi, Tomokatsu; Kiyanagi, Ryoji; Ohara, Takashi; Ebine, Masumi; Sakasai, Kaoru

Proceedings of 2022 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room Temperature Semiconductor Detector Conference (2022 IEEE NSS MIC RTSD) (Internet), 2 Pages, 2022/11

https://doi.org/10.1109/NSS/MIC44845.2022.10399279

A new thin position-sensitive scintillation neutron detectors have been developed to replace present scintillation detectors in SENJU diffractometer at J-PARC MLF. The SENJU diffractometer originally composed of 37 position-sensitive detectors, where each detector has neutron sensitive area of 256 256 mm with a pixel size of 4 4 mm. To renew some original detectors the new detectors have been developed based on ZnS scintillator and wavelength-shifting fibers technology. The developed replacement detectors were designed with a thin thickness of 12 cm, which is 40% of the original detector. The new detectors have also improved detector performances to the original ones in terms of detection efficiency (60% for 2-A neutrons) and count uniformity (5-8%). The produced six detector modules have been implemented to the beamline after checking their detector performances in the lab.

PSTEP: Project for solar-terrestrial environment prediction

Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.

Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12

https://doi.org/10.1186/s40623-021-01486-1

The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.

Two-dimensional scintillation neutron detectors for the extension of SENJU diffractometer

Nakamura, Tatsuya; To, Kentaro; Koizumi, Tomokatsu; Kiyanagi, Ryoji; Ohara, Takashi; Ebine, Masumi; Sakasai, Kaoru

Proceedings of 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC 2020), Vol.1, p.483 - 484, 2021/09

https://doi.org/10.1109/NSS/MIC42677.2020.9507813

Two-dimensional neutron detectors were developed for the extension of SENJU time-of-flight Laue single crystal neutron diffractometer in J-PARC MLF. The detectors are to be installed at the additional detector bank for the SENJU instrument. The detector module is made based on ZnS scintillator and wavelength-shifting fiber technology, where each detector module maintains a neutron-sensitive area of 256256 mm with a pixel size of 44 mm. To meet the tight space limitation in the instrument, the detector was designed as compact as possible. The detector has a depth of 170 mm, which is about 40% smaller than that of the original SENJU detector. All four produced detectors exhibited similar detector performances: detection efficiency 50-60% for 2- neutron, Co gamma-ray sensitivity 110, count uniformity 3-6%.