Large spontaneous Hall effect with flexible domain control in the antiferromagnetic material TaMnP

Kotegawa, Hisashi*; Nakamura, Akira*; Huyen, V. T. N.*; Arai, Yuki*; To, Hideki*; Sugawara, Hitoshi*; Hayashi, Junichi*; Takeda, Keiki*; Tabata, Chihiro; Kaneko, Koji; et al.

Physical Review B, 110(21), p.214417_1 - 214417_8, 2024/12

https://doi.org/10.1103/PhysRevB.110.214417

Study on eutectic melting behavior of control rod materials in severe accidents of sodium-cooled fast reactors, 1; Project overview and progress until 2022

Yamano, Hidemasa; Takai, Toshihide; Emura, Yuki; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Morita, Koji*; Nakamura, Kinya*; Ahmed, Z.*; Pellegrini, M.*

Proceedings of 14th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation, and Safety (NUTHOS-14) (Internet), 12 Pages, 2024/08

This paper describes the project overview and progress of experimental and analytical studies conducted until 2022. A specific result in this paper is to obtain first experimental data of BC-SS eutectic freezing.

Tuning of spin-orbit coupling in chiral molecule-incorporated two-dimensional organic-inorganic hybrid perovskite copper halides with ferromagnetic exchange interactions

Taniguchi, Koji*; Huang, P.-J.*; Sagayama, Hajime*; Kiyanagi, Ryoji; Oishi, Kazuki*; Kito, Shunsuke*; Nakamura, Yuiga*; Miyasaka, Hitoshi*

Physical Review Materials (Internet), 8(2), p.024409_1 - 024409_10, 2024/02

https://doi.org/10.1103/PhysRevMaterials.8.024409

Summary report in FY2022 of subsidy program for the Project of Decommissioning and Contaminated Water Management "Development of Analysis and Estimation Technology for Characterization of Fuel Debris (Development of Technologies for Enhanced Analysis Accuracy, Thermal behavior Estimation, and Simplified Analysis of Fuel Debris)" started in FY2021

Koyama, Shinichi; Ikeuchi, Hirotomo; Mitsugi, Takeshi; Maeda, Koji; Sasaki, Shinji; Onishi, Takashi; Tsai, T.-H.; Takano, Masahide; Fukaya, Hiroyuki; Nakamura, Satoshi; et al.

Hairo, Osensui, Shorisui Taisaku Jigyo Jimukyoku Homu Peji (Internet), 216 Pages, 2023/11

https://en.dccc-program.jp/wp-content/uploads/20231117_JAEA.pdf

In FY 2021 and 2022, JAEA perfomed the subsidy program for "the Project of Decommissioning and Contaminated Water Management (Development of Analysis and Estimation Technology for Characterization of Fuel Debris (Development of Technologies for Enhanced Analysis Accuracy, Thermal Behavior Estimation, and Abbreviated Analysis))" started in FY 2021. This presentation material summarized the results of the project, which will be available shortly on the website of Management Office for the Project of Decommissioning, Contaminated Water and Treated Water Management.

Progress of evaluation of beam coupling impedance reduction for the Eddy-current type septum magnet in J-PARC MR

Kobayashi, Aine*; Toyama, Takeshi*; Nakamura, Takeshi*; Shobuda, Yoshihiro; Ishii, Koji*; Tomizawa, Masahito*; Takeuchi, Yasunao*; Sato, Yoichi*

Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.19 - 23, 2023/01

https://www.pasj.jp/web_publish/pasj2022/proceedings/PDF/TUOB/TUOB01.pdf

In the J-PARC main ring, density modulation due to longitudinal beam instability occurs during the debunching process of coasting beams. This leads to the generation of an electron cloud, which in turn causes transverse beam instabilities. The transverse beam instability causes beam loss and the electron cloud is assumed to cause vacuum degradation, both of which hinder the beam intensity enhancement, so it is essential to clarify the causes and countermeasures. In particular, the longitudinal impedance of several hundred MHz has been investigated as relevant, and measures to reduce the impedance of individual devices are underway. The Eddy-current type septum magnet, newly installed this year, was found to have a large impedance by simulation. Therefore, we are investigating a method to reduce the impedance by a flange loaded with SiC radio wave absorber, which can be applied to locations where there is no spatial margin to install a taper. In this report, we will discuss the characterization of SiC to be used in actual devices, impedance simulation reflecting the results of SiC evaluation, and evaluation of the effect of impedance countermeasures by impedance measurement using the wire method, and progress in evaluating the effect on the beam by beam simulation and beam study.

Materials science and fuel technologies of uranium and plutonium mixed oxide

Kato, Masato; Machida, Masahiko; Hirooka, Shun; Nakamichi, Shinya; Ikusawa, Yoshihisa; Nakamura, Hiroki; Kobayashi, Keita; Ozawa, Takayuki; Maeda, Koji; Sasaki, Shinji; et al.

Materials Science and Fuel Technologies of Uranium and Plutonium mixed Oxide, 171 Pages, 2022/10

https://doi.org/10.1201/9781003298205

Innovative and advanced nuclear reactors using plutonium fuel has been developed in each country. In order to develop a new nuclear fuel, irradiation tests are indispensable, and it is necessary to demonstrate the performance and safety of nuclear fuels. If we can develop a technology that accurately simulates irradiation behavior as a technology that complements the irradiation test, the cost, time, and labor involved in nuclear fuel research and development will be greatly reduced. And safety and reliability can be significantly improved through simulation of nuclear fuel irradiation behavior. In order to evaluate the performance of nuclear fuel, it is necessary to know the physical and chemical properties of the fuel at high temperatures. And it is indispensable to develop a behavior model that describes various phenomena that occur during irradiation. In previous research and development, empirical methods with fitting parameters have been used in many parts of model development. However, empirical techniques can give very different results in areas where there is no data. Therefore, the purpose of this study is to construct a scientific descriptive model that can extrapolate the basic characteristics of fuel to the composition and temperature, and to develop an irradiation behavior analysis code to which the model is applied.

Study on eutectic melting behavior of control rod materials in core disruptive accidents of sodium-cooled fast reactors, 1; Project overview and progress until 2020

Yamano, Hidemasa; Takai, Toshihide; Emura, Yuki; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; Morita, Koji*; Nakamura, Kinya*; Fukai, Hirofumi*; et al.

Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09

This paper describes the project overview and progress of experimental and analytical studies conducted until 2020. Specific results in this paper are the measurement of the eutectic reaction rates and the validation of physical model describing the eutectic reaction in the analysis code through the numerical analysis of the BC-SS eutectic reaction rate experiments in which a BC pellet was placed in a SS crucible.

Impedance reduction by a SiC-loaded flange and its application to the J-PARC main ring septum magnet

Kobayashi, Aine*; Toyama, Takeshi*; Nakamura, Takeshi*; Shobuda, Yoshihiro; Ishi, Koji*

Nuclear Instruments and Methods in Physics Research A, 1031, p.166515_1 - 166515_12, 2022/05

https://doi.org/10.1016/j.nima.2022.166515

The beam power of the main ring of the Japan Proton Accelerator Research Complex (J-PARC) is currently being increased. For high-power beam realization, it is essential to suppress the beam instability that limits the beam power and to estimate and enact countermeasures against the beam coupling impedance of individual devices. The fast-extraction (FX) septum magnet will be replaced with another magnet that copes with higher numbers of repetition cycles. Despite their different structures, both septa demonstrated a large impedance in estimates performed by the CST studio suite wake-field solver. The widely used taper impedance-reduction method would be effective but receives spatial constraints. By attaching a copper plate and SiC to the flange of the septum magnet, we could effectively reduce the impedance. The copper plate on the flange reduces the impedance below the cut-off frequency. Moreover, when SiC was loaded, the remaining impedance was three times lower than when using the copper plate alone. After applying this method to the new septum magnet, the maximum longitudinal impedance was reduced to 1% of the value without countermeasures, largely improving the beam stability condition. We also estimated the required thickness of SiC and the calorific value. This method saves space and is installed by simple attachment to the flange, regardless of the shape of the beam pipe. Therefore, it is also applicable to other devices.

Study on eutectic melting behavior of control rod materials in core disruptive accidents of sodium-cooled fast reactors, 1; Project overview and progress until 2019

Yamano, Hidemasa; Takai, Toshihide; Furukawa, Tomohiro; Kikuchi, Shin; Emura, Yuki; Kamiyama, Kenji; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; et al.

Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 11 Pages, 2021/08

https://doi.org/10.1115/ICONE28-63301

One of the key issues in a core disruptive accident (CDA) evaluation in sodium-cooled fast reactors is eutectic reactions between boron carbide (BC) and stainless steel (SS) as well as its relocation. Such behaviors have never been simulated in CDA numerical analyses in the past, therefore it is necessary to develop a physical model and incorporate the model into the CDA analysis code. This study focuses on BC-SS eutectic melting experiments, thermophysical property measurement of the eutectic melt, and physical model development for the eutectic melting reaction. The eutectic experiments involve the visualization experiments, eutectic reaction rate experiments and material analyses. The thermophysical properties are measured in a range from solid to liquid state. The physical model is developed for a CDA computer code based on the measured data of the eutectic reaction rate and the physical properties. This paper describes the project overview and progress of experimental and analytical studies conducted until 2019. Specific results in this paper are the validation of physical model describing BC-SS eutectic reaction in the CDA analysis code, SIMMER-III, through the numerical analysis of the BC-SS eutectic melting experiments in which a BC block was placed in a SS pool.

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.