検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 120 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Validation of evaluation model for analysis of steam reformer in HTGR hydrogen production plant

石井 克典; 青木 健; 井坂 和義; 野口 弘喜; 清水 厚志; 佐藤 博之

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05

JAEA initiated High Temperature engineering Test Reactor (HTTR) heat application test project to establish coupling technologies between HTGR and a hydrogen production plant necessary to achieve large-scale, low cost, and carbon-free hydrogen production. One important element for the coupling technologies is a system analysis code which can simulate dynamic behavior of a HTGR hydrogen production system to design a plant control system for the effects of circulated helium heat through both facilities. The code is required to deal with a complex system which involves several subsystems and different physics with different timescales. As a first step of the development, we developed a heat and mass balance evaluation model of a helium-heated steam reformer. This report will present the outline of the developed model and simulation results with comparison to the experimental results.

論文

Development of safety design philosophy of HTTR-Heat Application Test Facility

青木 健; 清水 厚志; 野口 弘喜; 倉林 薫; 安田 貴則; 野本 恭信; 飯垣 和彦; 佐藤 博之; 坂場 成昭

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05

本研究では、高温ガス炉と水素製造施設を接続したHTTR(高温工学試験研究炉)-熱利用試験施設に対する安全設計方針を開発した。検討の結果、高圧ガスや可燃性ガスにより想定される災害に対して公衆安全を確保するため、水素製造施設に対しては現行の化学プラントで適用されている法規を適用する安全設計方針を提示した。また、水素製造施設の異常に伴う漏えい可燃性物質の火災爆発や水素製造施設除熱量の変動に対する原子炉施設の通常運転機能の確保等の対策を含め、水素製造施設を接続した原子炉施設特有の安全要件に適合した安全設計方針を提示した。HTTR-熱利用試験施設に対して開発された安全設計方針は、HTTR-熱利用試験施設の基本設計や詳細設計に活用される見込みである。

論文

Development plan for coupling technology between high temperature gas-cooled reactor HTTR and hydrogen production facility, 1; Overview of the HTTR heat application test plan to establish high safety coupling technology

野本 恭信; 水田 直紀; 守田 圭介; 青木 健; 沖田 将一朗; 石井 克典; 倉林 薫; 安田 貴則; 田中 真人; 井坂 和義; et al.

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05

JAEA initiated an HTTR heat application test plan to develop for coupling technology between HTGR and hydrogen production facility. The principal objective of this test plan is to establish the high safety coupling technology for coupling a hydrogen production facility to HTGR through the demonstration of a hydrogen production by the proven technology of methane steam reforming method utilizing the HTTR as a high temperature heat source. The other objective is to develop for coupling equipment such as a high temperature isolation valve, a helium gas circulator and a high temperature insulation pipe. This paper describes the overview of an HTTR heat application test plan such as a draft test schedule and test targets for the demonstration of a hydrogen production. This paper also presents basic specifications of an HTTR heat application test facility such as the HTTR modification strategy, overall system configuration and heat and mass balance at rated test operation for the demonstration of a hydrogen production. Furthermore, the operation plan during the normal start-up and shut-down processes is proposed.

論文

Development plan for coupling technology between high temperature gas-cooled reactor HTTR and Hydrogen Production Facility, 2; Development plan for coupling equipment between HTTR and Hydrogen Production Facility

水田 直紀; 守田 圭介; 青木 健; 沖田 将一朗; 石井 克典; 倉林 薫; 安田 貴則; 田中 真人; 井坂 和義; 野口 弘喜; et al.

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 6 Pages, 2023/05

High temperature gas-cooled reactor (HTGR) is expected to extend the use of nuclear heat to a wider spectrum of industrial applications such as hydrogen production, high efficiency power generation, etc., due largely to high temperature heat supply capability as well as inherent safe characteristics. Japan Atomic Energy Agency (JAEA) have been contracted by the Agency for Natural Resources and Energy, part of the Ministry of Economy, Trade and Industry (METI) of Japan, to conduct its Hydrogen Production Demonstration Project Utilizing Very High Temperature. The primary objective of this project is to establish "coupling technology" between HTGR and hydrogen production facility in accordance with "Green Growth Strategy Through Achieving Carbon Neutrality in 2050". From this fiscal year, JAEA initiated a program to produce hydrogen using an HTTR (High Temperature Engineering Test Reactor) to develop coupling technologies between HTGR and hydrogen production facility required for a massive, cost-effective and carbon-free hydrogen production technology. This paper describes the development plan for coupling equipment which is required for an HTTR heat application test as coupling technologies between an HTTR and a hydrogen production facility. The coupling equipment is composed of a high temperature isolation valve to prevent the ingress of the flammable gas and/or the leakage of radioactive materials for nuclear facility, a secondary helium gas circulator to feed a high temperature helium gas, and a high temperature insulation pipe to transport of a high temperature helium gas from an Internal Heat Exchanger (IHX) to a hydrogen production facility. The development plan of coupling equipment contains each target and draft schedule.

論文

Introduction of loop operating system to improve the stability of continuous hydrogen production for the thermochemical water-splitting iodine-sulfur process

田中 伸幸; 竹上 弘彰; 野口 弘喜; 上地 優; Myagmarjav, O.; 久保 真治

International Journal of Hydrogen Energy, 46(55), p.27891 - 27904, 2021/08

 被引用回数:2 パーセンタイル:10.1(Chemistry, Physical)

熱化学水素製造法ISプロセスでは、配管閉塞などを回避し、水素製造を安定的に運転するため、各反応器における組成変動を抑制することが求められる。従来の運転方法は、全ての反応器を同時に接続するため、安定的に連動させて運転を行うことが困難であった。本報では、それを解決するため、反応工程別に閉ループを形成することで、各工程を個別に安定化させるループ運転を行った後、連続運転に移行する新たな運転方法を提示した。新たなループ構成に対して、フローシート解析を行い、物質収支が矛盾なく閉ループを構成していることを示し、加えて、ループ運転から連続運転に滞りなく移行でき、水素製造を達成できることを明らかにした。

論文

Fabrication, permeation, and corrosion stability measurements of silica membranes for HI decomposition in the thermochemical iodine-sulfur process

Myagmarjav, O.; 柴田 愛*; 田中 伸幸; 野口 弘喜; 久保 真治; 野村 幹弘*; 竹上 弘彰

International Journal of Hydrogen Energy, 46(56), p.28435 - 28449, 2021/08

 被引用回数:2 パーセンタイル:10.1(Chemistry, Physical)

In this study, a corrosion-stable silica ceramic membrane was developed to be used in H$$_{2}$$ purification during the hydrogen iodide decomposition (2HI $$rightarrow$$ H$$_{2}$$ + I$$_{2}$$), which is a new application of the silica membranes. From a practical perspective, the membrane separation length was enlarged up to 400 mm and one end of the membrane tubes was closed to avoid any thermal variation along the membrane length and sealing issues. The silica membranes consisted of a three-layer structure comprising a porous $$alpha$$-Al$$_{2}$$O$$_{3}$$ ceramic support, an intermediate layer, and a top silica layer. The intermediate layer was composed of $$gamma$$-Al$$_{2}$$O$$_{3}$$ or silica, and the top silica layer that is H$$_{2}$$ selective was prepared via counter-diffusion chemical vapor deposition of a hexyltrimethoxysilane. A membrane using a silica intermediate layer exhibited a higher H$$_{2}$$/SF$$_{6}$$ selectivity but lower H$$_{2}$$ permeance with compared with the membrane using a $$gamma$$-Al$$_{2}$$O$$_{3}$$ intermediate layer. The membrane using the silica intermediate layer was more stable in corrosive HI gas than a membrane with a $$gamma$$-Al$$_{2}$$O$$_{3}$$ intermediate layer after 300 h of stability tests. To the best of our knowledge, this is the first report of 400-mm-long closed-end silica membranes supported on Si-formed $$alpha$$-Al$$_{2}$$O$$_{3}$$ tubes produced via chemical vapor deposition method. In conclusion, the developed silica membranes seem suitable for membrane reactors that produce H$$_{2}$$ on large scale using HI decomposition in the thermochemical iodine-sulfur process.

論文

Development of a membrane reactor with a closed-end silica membrane for nuclear-heated hydrogen production

Myagmarjav, O.; 田中 伸幸; 野村 幹弘*; 野口 弘喜; 今井 良行; 上地 優; 久保 真治; 竹上 弘彰

Progress in Nuclear Energy, 137, p.103772_1 - 103772_7, 2021/07

 被引用回数:6 パーセンタイル:73.26(Nuclear Science & Technology)

Hydrogen production from nuclear energy has attracted considerable interest as a clean energy solution to address the challenges of climate change and environmental sustainability. With respect to the large-scale and economical production of hydrogen using nuclear energy, the thermochemical water-splitting iodine-sulfur (IS) process is a promising method. The IS process uses sulfur and iodine compounds to decompose water into its elemental constituents, hydrogen and oxygen, by using three coupled chemical reactions: the Bunsen reaction; sulfuric acid decomposition; and hydrogen iodide (HI) decomposition. The decomposition of HI is the efficiency-determining step of the process. In this work, a membrane reactor with a silica membrane closed on one end was designed, and its potential for hydrogen production from HI decomposition was explored. In the reactor-module design, only one end of the membrane tube was fixed, while the closed-end of the tube was freely suspended to avoid thermal expansion effects. The closed-end silica membranes were prepared for the first time by a counter-diffusion chemical vapor deposition of hexyltrimethoxysilane. In application, HI conversion of greater than 0.60 was achieved at a decomposition temperature of 400$$^{circ}$$C. Thus, the membrane reactor with closed-end silica membrane was shown to produce a successful equilibrium shift in the production of hydrogen via HI decomposition in the thermochemical IS process.

論文

Hydrogen production using thermochemical water-splitting iodine-sulfur process test facility made of industrial structural materials; Engineering solutions to prevent iodine precipitation

野口 弘喜; 上地 優; 田中 伸幸; 竹上 弘彰; 岩月 仁; 笠原 清司; Myagmarjav, O.; 今井 良行; 久保 真治

International Journal of Hydrogen Energy, 46(43), p.22328 - 22343, 2021/06

 被引用回数:8 パーセンタイル:54.5(Chemistry, Physical)

熱化学水素製造法ISプロセスは、高温ガス炉,太陽熱,産業廃熱などの様々な熱源を利用して、高効率に大規模水素製造が可能な方法のひとつである。ISプロセスの研究開発課題は、硫酸やヨウ化水素酸などの厳しい腐食環境における工業材料製機器の健全性とそれらの機器による安定した水素製造の実証である。原子力機構では、工業材料製の耐食機器を開発し、それらの機器を組み込んだ水素製造試験設備を製作し、上記研究開発課題の解決に向け、本試験設備の試験運転を進めている。安定した水素製造を行うために、HI-I$$_{2}$$-H$$_{2}$$O溶液の安定送液技術の開発、大量漏えいを防止するためのグラスライニング材の品質保証の改善、ブンゼン反応器における硫酸脱水法によるヨウ素析出防止技術の開発を行った。これらの改良により、水素製造量約30L/h、150時間の連続水素製造に成功し、厳しい腐食環境における工業材料製機器の健全性及び安定した水素製造を実証した。

論文

Thermally altered subsurface material of asteroid (162173) Ryugu

北里 宏平*; Milliken, R. E.*; 岩田 隆浩*; 安部 正真*; 大竹 真紀子*; 松浦 周二*; 高木 靖彦*; 中村 智樹*; 廣井 孝弘*; 松岡 萌*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

 被引用回数:30 パーセンタイル:96.87(Astronomy & Astrophysics)

2019年4月「はやぶさ2」ミッションは、地球に近い炭素質の小惑星(162173)リュウグウの人工衝撃実験を成功させた。これは露出した地下物質を調査し、放射加熱の潜在的な影響をテストする機会を提供した。はやぶさ2の近赤外線分光器(NIRS3)によるリュウグウの地下物質の観測結果を報告する。発掘された材料の反射スペクトルは、表面で観測されたものと比較して、わずかに強くピークがシフトした水酸基(OH)の吸収を示す。これは、宇宙風化や放射加熱が最上部の表面で微妙なスペクトル変化を引き起こしたことを示している。ただし、このOH吸収の強度と形状は、表面と同様に、地下物質が300$$^{circ}$$Cを超える加熱を経験したことを示している。一方、熱物理モデリングでは、軌道長半径が0.344AUに減少しても、推定される掘削深度1mでは放射加熱によって温度が200$$^{circ}$$Cを超えて上昇しないことが示されている。これは、リュウグウ母天体が放射加熱と衝撃加熱のいずれか、もしくは両方により熱変化が発生したという仮説を裏付けている。

論文

High temperature gas-cooled reactors

武田 哲明*; 稲垣 嘉之; 相原 純; 青木 健; 藤原 佑輔; 深谷 裕司; 後藤 実; Ho, H. Q.; 飯垣 和彦; 今井 良行; et al.

High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02

本書は、原子力機構における今までの高温ガス炉の研究開発の総括として、HTTRの設計、燃料、炉内構造物や中間熱交換器などの要素技術の開発、出力上昇試験、950$$^{circ}$$Cの高温運転、安全性実証試験などの運転経験及び成果についてまとめたものである。また、HTTRでの知見をもとに、商用炉の設計、高性能燃料、ヘリウムガスタービン、ISプロセスによる水素製造などの要素技術開発の現状について記述しており、今後の高温ガス炉の開発に非常に有用である。本書は、日本機械学会の動力エネルギーシステム部門による化石燃料及び原子力によるエネルギーシステムの技術書のシリーズの一冊として刊行されるものである。

論文

Nanoscale structural analysis of Pb(Mg$$_{1/3}$$Nb$$_{2/3}$$)O$$_3$$

米田 安宏; 谷口 博基*; 野口 祐二*

Journal of Physics; Condensed Matter, 33(3), p.035401_1 - 035401_8, 2021/01

 被引用回数:4 パーセンタイル:34.98(Physics, Condensed Matter)

放射光高エネルギーX線回折実験を用いて、リラクサーPb(Mg$$_{1/3}$$Nb$$_{2/3}$$)O$$_3$$ (PMN)のナノスケール構造解析を行った。PMNはよく知られたリラクサー強誘電体であるが、平均構造が立方晶構造であることから、強誘電性のミクロ構造を説明するために種々のモデルが提案されてきた。我々は2体相関分布関数法(pair distribution function, PDF)を使って20nmまでの広いレンジの局所構造解析を行った。

論文

Hydriodic iodide and iodine permeation characteristics of fluoropolymers as a lining material

田中 伸幸; 野口 弘喜; 上地 優; 竹上 弘彰; 久保 真治

International Journal of Hydrogen Energy, 45(35), p.17557 - 17561, 2020/07

 被引用回数:1 パーセンタイル:3.47(Chemistry, Physical)

熱化学水素製造法ISプロセスでは、HI-I$$_{2}$$-H$$_{2}$$O溶液環境に対する耐食材料としてPTFEやPFA等のフッ素系高分子をライニングした機器が用いられる。PTFEやPFAはHIやI$$_{2}$$を透過することが定性的には知られているが、材料腐食の観点からISプロセスの機器の信頼性評価のためには透過速度を定量的に評価する必要がある。本報では、PTFE及びPFA膜を用いてHI及びI$$_{2}$$の透過流束の測定を行い、定量データを取得した。この際、膜厚及び分圧に対して、規格化した透過係数を導入することで、膜固有の透過特性を評価することに成功した。また、透過係数に対してアレニウス型の実験式を整理し、プラント設計に使用できるようにした。これらの結果を基にして、プラントにおいて最適なテフロンライニング材の適応条件を明らかにした。

論文

Reliability improvements of corrosion-resistant equipment for thermochemical water splitting hydrogen production iodine-sulfur process

上地 優; 野口 弘喜; 竹上 弘彰; 田中 伸幸; 岩月 仁; 笠原 清司; 久保 真治

Nuclear Engineering and Design, 361, p.110573_1 - 110573_6, 2020/05

 被引用回数:7 パーセンタイル:67.5(Nuclear Science & Technology)

原子力機構では、原子力を用いた水素製造法として、高温ガス炉の熱利用法として有力候補の一つである熱化学法ISプロセスに関する研究開発を実施している。グラスライニング鋼材は、耐食性と構造強度を両立した実用工業材料であり、ISプロセスにおける候補材料のひとつである。本報では、グラスライニング製品の信頼性向上に関する技術的要件を整理し、製造品質の向上を図るとともに、試作したグラスライニング製熱電対保護管に対して、ガラス層のFEM応力解析, 熱サイクル試験, 曲げ荷重試験、及び試験片による腐食試験を行い、プロセス環境における健全性を確認した。

論文

Development of strength evaluation method of ceramic reactor for iodine-sulfur process and hydrogen production test in Japan Atomic Energy Agency

竹上 弘彰; 野口 弘喜; 田中 伸幸; 岩月 仁; 上地 優; 笠原 清司; 今井 良行; 寺田 敦彦; 久保 真治

Nuclear Engineering and Design, 360, p.110498_1 - 110498_6, 2020/04

 被引用回数:12 パーセンタイル:86.84(Nuclear Science & Technology)

日本原子力研究開発機構では、高温ガス炉を熱源として利用する熱化学法ISプロセスによる水素製造法の研究開発を行っている。ISプロセスの実用化に向けて、主要反応器について耐食性及び処理性能に関する信頼性評価を完了し、これらの成果を基に、全系を実用工業材料で製作した100NL/h-H$$_{2}$$規模の連続水素製造試験装置を完成させた。本報では、連続水素製造試験でのヨウ化水素溶液の安定的な送液技術を開発することで、水素製造時間を8時間から31時間に延伸することに成功した。また、セラミクス試験体の破壊試験データを用い、セラミックス構造体の強度推定式を作成することができた。

論文

Research and development on membrane IS process for hydrogen production using solar heat

Myagmarjav, O.; 岩月 仁; 田中 伸幸; 野口 弘喜; 上地 優; 井岡 郁夫; 久保 真治; 野村 幹弘*; 八巻 徹也*; 澤田 真一*; et al.

International Journal of Hydrogen Energy, 44(35), p.19141 - 19152, 2019/07

 被引用回数:16 パーセンタイル:50.25(Chemistry, Physical)

Thermochemical hydrogen production has attracted considerable interest as a clean energy solution to address the challenges of climate change and environmental sustainability. The thermochemical water-splitting iodine-sulfur (IS) process uses heat from nuclear or solar power and thus is a promising next-generation thermochemical hydrogen production method that is independent of fossil fuels and can provide energy security. This paper presents the current state of research and development of the IS process based on membrane techniques using solar energy at a medium temperature of 600$$^{circ}$$C. Membrane design strategies have the most potential for making the IS process using solar energy highly efficient and economical and are illustrated here in detail. Three aspects of membrane design proposed herein for the IS process have led to a considerable improvement of the total thermal efficiency of the process: membrane reactors, membranes, and reaction catalysts. Experimental studies in the applications of these membrane design techniques to the Bunsen reaction, sulfuric acid decomposition, and hydrogen iodide decomposition are discussed.

論文

Local structure analysis of PbTiO$$_3$$ in high-temperature cubic phase

米田 安宏; 谷口 博基*; 北中 佑樹*; 野口 祐二*

Ferroelectrics, 538(1), p.57 - 62, 2019/05

 被引用回数:5 パーセンタイル:27.81(Materials Science, Multidisciplinary)

チタン酸鉛の高エネルギーX線回折実験を行った。回折データから2体相関分布関数(PDF)を用いて局所構造解析を行った。高温相の立方晶相では平均構造からのズレが確認された。平均構造から逸脱した鉛原子は周囲の鉛で独自のPb-O-Pbネットワーク構造を形成していることを示した。

論文

R&D status of hydrogen production test using IS process test facility made of industrial structural material in JAEA

野口 弘喜; 竹上 弘彰; 上地 優; 田中 伸幸; 岩月 仁; 笠原 清司; 久保 真治

International Journal of Hydrogen Energy, 44(25), p.12583 - 12592, 2019/05

 被引用回数:16 パーセンタイル:52.52(Chemistry, Physical)

工業材料製の連続水素製造試験設備によるプラント機器技術(耐食性、機器性能)及び運転手順の信頼性を確証する水素製造試験に取り組んでいる。本プロセスを構成する3つの反応工程(ブンゼン反応工程,硫酸分解反応工程, HI分解反応工程)を連結した連続水素製造試験を実施し、10NL/h、8時間の水素製造に成功した。この試験を通じて明らかとなった高濃度ヨウ素溶液を移送する耐食定量ポンプの軸封部に固体ヨウ素が蓄積し、ポンプが停止する課題に対し、固体ヨウ素の溶解除去を狙いとした、気液を併用して軸封部に流通させる軸バリアを開発した。本技術開発を用いることで、20NL/h、31時間と水素製造時間を延伸させることに成功した。

論文

Current R&D status of thermochemical water splitting hydrogen production iodine-sulfur process in Japan Atomic Energy Agency, 1; Hydrogen production test and component development

竹上 弘彰; 野口 弘喜; 田中 伸幸; 岩月 仁; 上地 優; 笠原 清司; 今井 良行; 寺田 敦彦; 久保 真治

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

日本原子力研究開発機構では、高温ガス炉を熱源として利用する熱化学法ISプロセスによる水素製造法の研究開発を行っている。ISプロセスの実用化に向けて、主要反応器について耐食性及び処理性能に関する信頼性評価を完了し、これらの成果を基に、全系を実用工業材料で製作した100NL/h-H$$_{2}$$規模の連続水素製造試験装置を完成させた。本報では、これらのISプロセスの研究開発について、連続水素製造試験及び機器開発の現状・成果について報告する。

論文

Current R&D status of thermochemical water splitting hydrogen production iodine-sulfur process in Japan Atomic Energy Agency, 2; Reliability improvements of corrosion-resistant equipment

上地 優; 野口 弘喜; 竹上 弘彰; 田中 伸幸; 岩月 仁; 笠原 清司; 久保 真治

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

原子力機構では、原子力を用いた水素製造法として、高温ガス炉の熱利用法として有力候補の一つである熱化学法ISプロセスに関する研究開発を実施している。原子力機構はこれまでに、ガラス及びフッ素樹脂材料を用いた試験装置により、連続1週間、30NL/hの水素製造を達成した。その後、実用工業材料を用いた主要反応器を製作し、プロセス腐食環境における健全性を確認した。これらの結果を基に、実用工業材料を用いた、水素製造量100NL/h規模の試験設備を建造した。このうちグラスライニング鋼材は、容器、配管及びセンサー保護管等に用いられ、重要な材料の一つである。本報では、グラスライニング製熱電対保護管の信頼性向上に関する技術的要件を整理するとともに、品質向上確認として実施したガラス層のFEM応力解析、熱サイクル試験、曲げ荷重試験及び腐食試験について報告する。

論文

R&D status in thermochemical water-splitting hydrogen production iodine-sulfur process at JAEA

野口 弘喜; 竹上 弘彰; 笠原 清司; 田中 伸幸; 上地 優; 岩月 仁; 会田 秀樹; 久保 真治

Energy Procedia, 131, p.113 - 118, 2017/12

 被引用回数:18 パーセンタイル:99.76

ISプロセスは最も研究された熱化学水素製造プロセスである。現在、原子力機構は実用材料機器を用いた設備による試験の段階にある。主な課題は、プロセス全体の成立性と過酷な環境下での安定した水素製造の確証である。そのために、耐食材料を用いた水素製造能力100L/hの試験設備を作製した。初めに、工程ごとの試験により反応器や分離器の基礎的な性能を確認した。その後、全工程を接続して運転を行い、8時間連続での10L/hの水素製造に成功した。

120 件中 1件目~20件目を表示