Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tomiyasu, Keisuke*; Sato, Mika*; Koyama, Shunichi*; Nojima, Tsutomu*; Kajimoto, Ryoichi; Ji, S.*; Iwasa, Kazuaki*
Journal of the Physical Society of Japan, 86(9), p.094706_1 - 094706_6, 2017/09
Times Cited Count:4 Percentile:36.07(Physics, Multidisciplinary)Nakagawa, Masahiro; Nojima, Shun; Fujii, Katsutoshi; Shishido, Nobuhito; Sakai, Toshiya; Umehara, Takashi; Shimizu, Isamu
Hoken Butsuri, 47(3), p.189 - 193, 2012/10
It is essential to wear an air-purifying respirator in the radiation works in a contaminated atmosphere. A breath-responsive-powered air-purifying respirator (BR-PAPR) has been recently developed. However, no research has yet been conducted to determine the protection factor (PF) of the BR-PAPR in actual workplaces. In this study, the PFs of the BR-PAPR were measured by a man-test apparatus and compared with those of a non-powered full face mask. The PFs were measured under three different situations; normal wearing condition, clogging the filter and leaving a gap between the face and the mask. Under these situations, it was found that the PFs of the BR-PAPR are higher than those of the non-powered full face mask. PFs greater than 4000 were obtained for 95% of the subjects who wear the BR-PAPR, and PFs over 6667, the upper limit of the man-test apparatus, were obtained for 49% of them. The questionnaire survey was conducted for workers. The results showed that the workers feel a reduced burden when they wear the BR-PAPR. The results of this study showed high protection performance and operation efficiency of the BR-PAPR.
Ueno, Fumiyoshi; Shiraishi, Hironori; Inoue, Shun; Motooka, Takafumi; Kato, Chiaki; Yamamoto, Masahiro; Uchiyama, Gunzo; Nojima, Yasuo*; Fujine, Sachio*
Proceedings of 20th International Conference on Nuclear Engineering and the ASME 2012 Power Conference (ICONE-20 & POWER 2012) (DVD-ROM), 8 Pages, 2012/07
In PUREX process for spent fuel reprocessing plants, heating portions in the components are severely corroded in the boiling solution under heat transfer (HT) conditions. In this paper, authors have focused on the effects of surface temperature and heat flux on corrosion rates (CRs) of stainless steels in boiling nitric acid under HT conditions. Two types of cells for HT and immersion conditions were applied for corrosion tests. Test solution used was 33 mol/m vanadium added to 3 kmol/m nitric acid solution, and was heated at boiling temperature under atmospheric pressure. Additionally, a boiling curve which was indicated the relation between heat flux and degree of superheating was investigated experimentally. Surface temperatures during corrosion tests were estimated from a boiling curve. The results showed that CR did not depend on heat flux, but depended on surface temperature. Arrhenius plots on CRs indicated that CR was accelerated by solution boiling against non-boiling.
Fujii, Katsutoshi; Takahashi, Teruhiko; Saegusa, Jun; Shishido, Nobuhito; Mochizuki, Kaoru*; Nojima, Shun; Akiyama, Isamu; Shimizu, Isamu
no journal, ,
In NSRR, pulse operation is performed. The correction of counting-loss is needed under the condition that large amount of neutrons have detected in a short period of time. This time, counting-loss of the neutron survey meter(type NSN1) is estimated used for monitoring Burst neutrons at NSRR.
Nakagawa, Masahiro; Nojima, Shun; Fujii, Katsutoshi; Shishido, Nobuhito; Sakai, Toshiya; Umehara, Takashi; Shimizu, Isamu
no journal, ,
no abstracts in English
Ueno, Fumiyoshi; Shiraishi, Hironori; Inoue, Shun; Motooka, Takafumi; Kato, Chiaki; Yamamoto, Masahiro; Uchiyama, Gunzo; Nojima, Yasuo*; Fujine, Sachio*
no journal, ,
Effect of metal surface temperature and solution boiling on corrosion of stainless steel in boiling nitric acid solution at heating portion was studied to investigate ageing behavior of the components in spent fuel reprocessing plant. Corrosion tests under the conditions of heat transfer and immersion in atmospheric pressure were carried out using nitric acid solution including Vanadium. As the results, apparent activation energies of thermal dependences on corrosion rates of both the heat transfer and the immersion were indicated approximately 40 kJ/mol. Corrosion rate under the boiling condition were higher about 7 times for the non-boiling condition.
Yoshitomi, Hiroshi; Miyauchi, Hideaki; Sato, Yoshitaka; Nojima, Shun; Tachibana, Haruo; Suzuki, Takashi; Takahashi, Fumiaki; Kobayashi, Ikuo*; Suzuki, Akifumi*
no journal, ,
no abstracts in English
Nakagawa, Masahiro; Kato, Takuya; Nojima, Shun; Sakai, Toshiya; Shishido, Nobuhito; Umehara, Takashi
no journal, ,
Mask fitting tester "MT-03" is widespread as educational equipment in medical institution and industrial organization. However, there are few examples introduced in order to check the protection performance of purifying respirators in nuclear facilities. In this study, we compared protection factors obtained by MT-03 and those obtained by Mask-man test apparatus "MT-100N". As a result, although the change of measurement result is larger and measured value is higher than that of MT-100N, it was found that protection performance can be checked appropriately.
Nojima, Shun; Sakai, Jun; Nakagawa, Masahiro; Shirato, Yoshihiro; Aoyagi, Hiroyuki; Otsuka, Yoshikazu; Sakai, Toshiya; Shishido, Nobuhito; Umehara, Takashi
no journal, ,
no abstracts in English
Furutani, Misa; Aoyagi, Hiroyuki*; Shirato, Yoshihiro; Nojima, Shun; Nakagawa, Masahiro; Otsuka, Yoshikazu; Niinuma, Shinichi*; Sakai, Toshiya; Muto, Yasushi; Nanri, Tomohiro; et al.
no journal, ,
no abstracts in English