Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
瀬下 和芳; 青木 和弘; 亀高 正男*; Nussbaum, C.*; 嶋本 利彦*; Ma, S.*; Yao, L.*
no journal, ,
日本原子力研究開発機構は、スイスMont Terri地下研究施設の主断層を対象としたSIMFIPプローブを用いた断層スリップ試験(注水実験)に参加している(Nussbaum et al., 2011; Guglielmi, 2015)。この試験の解析に資することを目的に、試験区間のコアの摩擦試験を行った結果を報告する。試験結果からは、すべり速度0.021mm/s以下の場合は、わずかな速度強化を、0.021mm/s以上の場合は顕著な速度強化を示した。なお、本調査結果と、われわれが別途進めている福島県浜通りの地震(2011.4.11)で出現した塩ノ平断層における断層ガウジの摩擦実験(青木ほか、2016)との比較についても報告する。
青木 和弘; 瀬下 和芳; Guglielmi, Y.*; Nussbaum, C.*; 嶋本 利彦*; Ma, S.*; Yao, L.*; 亀高 正男*; 酒井 亨*
no journal, ,
JAEA participated in the Fault Slip Experiment of Mont Terri Project which aims at understanding (1) the conditions for slip activation and stability of clay faults, and (2) the evolution of the coupling between fault slip, pore pressure and fluids migration. The experiment uses SIMFIP probe to estimate (1) the hydraulic and elastic properties of fault zone elements, (2) the state of stresses across the fault zone and (3) the fault zone apparent strength properties (friction coefficient and cohesion). To elaborate on the Fault Slip Experiment, JAEA performed friction experiment of borehole cores of depths 47.2m and 37.3m using a rotary-shear low to high-velocity friction apparatus at Institute of Geology, China Earthquake Administration.
青木 和弘; 瀬下 和芳; Nussbaum, C.*; Guglielmi, Y.*; 嶋本 利彦*; 酒井 亨*; 亀高 正男*; Ma, S.*; Yao, L.*
no journal, ,
スイスMont Terri地下研究施設の主断層を対象としたSIMFIPプローブを用いた断層スリップ試験(注水実験)の解析に資することを目的に、試験区間のコアの摩擦試験を行った。試験機は、中国地震局地質研究所が所有する回転剪断式低速・高速摩擦試験機を用い、試験条件は室温下で無水及び含水条件下で、垂直応力は1.4および4.0MPa、ホスト試料として岩石に近い挙動を示すTiAlV合金製ピストンを用い、すべり速度は0.2microns/s2.1mm/sとし、低速・中速摩擦試験を実施して摩擦の速度依存性などを求めた。
青木 和弘; 瀬下 和芳; 酒井 亨*; 小峰 佑介*; 亀高 正男*; 渡邊 貴央; Nussbaum, C.*; Guqlielmi, Y.*
no journal, ,
Friction experiment was conducted on samples from the Main Fault of Mont Terri Rock Laboratory, Switzerland and then micro-textures of deformed gouges were observed using a scanning electron microscope JCM-6000 and JXA-8530F. Samples were taken at the depths of 47.2m and 37.3m of borehole BSF-1, and at 36.7m, 37.1m, 41.4m and 44.6m of borehole BSF-2, which were drilled from the drift floor at 260m depth from the surface. Friction experiment was conducted on above 6 samples using a rotary shear low to high-velocity friction apparatus at the Institute of Geology, China Earthquake Administration in Beijing at a normal stress of 3.95 to 4.0 MPa and at slip rates ranging 0.2 microns/s to 2.1mm/s. Cylindrical specimens of Ti-Al-V alloy, exhibiting similar behaviors as the host rock specimen, were used as rotary and stationary pistons of 40 mm diameter. A Teflon sleeve was used around the piston to confine the sample during the test. Main results are summarized as follows.