Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tang, T. L.*; Uesaka, Tomohiro*; Kawase, Shoichiro; Beaumel, D.*; Dozono, Masanori*; Fujii, Toshihiko*; Fukuda, Naoki*; Fukunaga, Taku*; Galindo-Uribarri, A.*; Hwang, S. H.*; et al.
Physical Review Letters, 124(21), p.212502_1 - 212502_6, 2020/05
Times Cited Count:18 Percentile:75.04(Physics, Multidisciplinary)The structure of a neutron-rich F nucleus is investigated by a quasifree (
) knockout reaction. The sum of spectroscopic factors of
orbital is found to be 1.0
0.3. The result shows that the
O core of
F nucleus significantly differs from a free
O nucleus, and the core consists of
35%
O
, and
65% excited
O. The result shows that the
O core of
F nucleus significantly differs from a free
O nucleus. The result may infer that the addition of the
proton considerably changes the neutron structure in
F from that in
O, which could be a possible mechanism responsible for the oxygen dripline anomaly.
Nakayama, Shinsuke; Kono, Hiroshi*; Watanabe, Yukinobu*; Iwamoto, Osamu; Ye, T.*; Ogata, Kazuyuki*
EPJ Web of Conferences, 146, p.12025_1 - 12025_4, 2017/09
Times Cited Count:5 Percentile:92.26(Nuclear Science & Technology)Recently, intensive neutron sources using deuteron accelerator have been proposed for various applications. Accurate and comprehensive deuteron nuclear data library over wide ranges of target mass number and incident energy are indispensable for the design of deuteron accelerator neutron sources. Thus, we have developed an integrated code system dedicated for analysis and prediction of deuteron-induced reactions, which is called DEUteron-induced Reaction Analysis Code System (DEURACS). In the present work, the analysis of reactions is extended to higher incident energy up to nearly 100 MeV and also DEURACS is applied to
reactions at 80 and 100 MeV. The DEURACS calculations reproduce the experimental double-differential cross sections for the
and
reactions well.
Nakayama, Shinsuke; Kono, Hiroshi*; Watanabe, Yukinobu*; Iwamoto, Osamu; Ogata, Kazuyuki*
RCNP Annual Report 2016 (Internet), 2 Pages, 2017/05
We are conducting a theoretical research on deuteron-induced reaction together with Kyushu University and Research Center for Nuclear Physics (RCNP) of Osaka University. The research outcomes achieved in fiscal year 2016 are summarized as a part of the annual report of RCNP. In recent years, accelerator neutron sources using reactions on light nuclei (Li, Be, C, etc.) are proposed for applications in various fields. Engineering design of such facilities requires accurate prediction of
reactions on light nuclei in a wide incident energy range. Therefore, we have developed a physics-based computational code system dedicated for deuteron-induced reactions, called DEURACS. In fiscal year 2016, we calculated double-differential neutron yields from deuteron bombardment on thick
Be and
C targets, and the calculation reproduced the experimental data quantitatively well in the incident energy range up to 50 MeV. From the results, it has been found that DEURACS can accurately predict
reactions on light nuclei in a wide incident energy range. In addition, component-by-component analysis has revealed that the nonelastic breakup reactions make the most dominant contribution to neutron production.
Kono, Hiroshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; Iwamoto, Osamu; Ye, T.*; Ogata, Kazuyuki*
JAEA-Conf 2016-004, p.165 - 170, 2016/09
For engineering design of deuteron accelerator neutron sources, accurate nuclear data of deuteron-induced reactions on neutron converter (Li, Be, C, etc.) and accelerator structure material (Fe, Cr, Ni, etc.) are indispensable. Therefore we have developed a computational code system based on physics models dedicated for deuteron nuclear data evaluation. In the present study, we have analyzed the reactions on beryllium at incident deuteron energies up to 65 MeV. Since there is a lot of experimental Thick Target Neutron Yields (TTNYs), double-differential
cross sections are calculated by the code system and then are converted to TTNYs. It is found that the calculated TTNYs reproduce the experimental ones fairly well except in the low neutron energy region.
Nakayama, Shinsuke; Kono, Hiroshi*; Watanabe, Yukinobu*; Iwamoto, Osamu; Ogata, Kazuyuki*
Physical Review C, 94(1), p.014618_1 - 014618_9, 2016/07
Times Cited Count:35 Percentile:89.60(Physics, Nuclear)Double-differential thick target neutron yields (TTNYs) from deuteron bombardment on thick Be and C targets are analyzed using the DEURACS (DEUteron-induced Reaction Analysis Code System). The calculated TTNYs reproduced the experimental ones quantitatively well in the incident energy range up to 50 MeV. In addition, it was found that the proton stripping reaction makes the most dominant contribution to neutron production. From the analysis, we conclude that the DEURACS is applicable to reactions and modeling of the stripping reaction is essential to predict neutron production yields accurately.
Nakayama, Shinsuke; Kono, Hiroshi*; Watanabe, Yukinobu*; Iwamoto, Osamu; Ye, T.*; Ogata, Kazuyuki*
EPJ Web of Conferences, 122, p.04004_1 - 04004_9, 2016/06
Times Cited Count:5 Percentile:88.03(Physics, Nuclear)In recent years, accelerator neutron sources using deuteron-induced reactions on Li,
Be,
C, etc., are proposed for applications in various fields. Engineering design of such facilities requires deuteron nuclear data in a broad incident energy range. We have developed a computational code system dedicated for deuteron nuclear data evaluation in combination with some theoretical models. The code system has been applied to analyses of double-differential
cross sections for
C,
Al, and
Ni at incident energies up to 100 MeV. On the other hand, there is few experimental double-differential
cross sections. Therefore, double-differential thick target neutron yields for light nuclei such as
Be and
C are calculated and compared with experimental data. The presentation will show the validation result of the present modelling for nucleon emissions from deuteron-induced reactions through comparison with available experimental data.
Kawamoto, Koji; Kuroiwa, Hiroshi; Yamada, Nobuto; Onuki, Kenji; Omori, Kazuaki; Takeuchi, Ryuji; Ogata, Nobuhisa; Omori, Masaki; Watanabe, Kazuhiko
JAEA-Technology 2014-011, 92 Pages, 2014/07
This document summarizes the data of pilot boreholes (12MI32) in the -500m Access/Research Gallery-South. The geological, hydraulic and geochemical data were obtained. In addition, groundwater monitoring system was installed to observe the groundwater pressure in initial condition and change during the excavation of gallery. The results of investigation, biotite granite with medium to coarse-grained equigranular texture are characterized. Rock mass classification is B from CM class. Minor fault with fault breccia are observed around 48.90mabh. However, S200_13 fault and IF_SB3_13_3 fault (that were presumed by an original model) were not observed. Density of fracture is large in the section of 40.00 to 80.00mabh. Water inflow was a maximum of 600 L/min in 78.83mabh. Permeability ranges from 2.0E-9 to 1.5E-08m/sec at the zone with low inflow, from 1.1E-05 to 1.6E-05m/sec at the zone with high inflow, respectively. Groundwater chemistry is rich in Na and Cl ion.
Tsuyuguchi, Koji; Kuroiwa, Hiroshi; Kawamoto, Koji; Yamada, Nobuto; Onuki, Kenji; Iwatsuki, Teruki; Takeuchi, Ryuji; Ogata, Nobuhisa; Suto, Masahiro; Mikake, Shinichiro
JAEA-Technology 2013-044, 89 Pages, 2014/02
This document summarizes the data of pilot boreholes (12MI27, 12MI33) in the -500m Access/Research Gallery-North. The geological, hydraulic and geochemical data were obtained. In addition, groundwater monitoring system was installed in closure test gallery for the flooding test in phase III research. The results of investigation, biotite granite with medium to coarse-grained equigranular texture are characterized. Rock mass classification is B from CH class. Minor fault with fault gouge that was not presumed by an original model are observed in 12MI33. Density of fracture in 12MI27 near the Main-shaft fault tends to be compared to 12MI33. Water inflow in both boreholes is less. Permeability ranges from 4.8E-10 to 6.1E-09m/sec at the zone without alteration and with low inflow, from 1.1E-07 to 2.7E-07m/sec at the zone without alteration and with high inflow, respectively. Groundwater chemistry is rich in Na and Cl ion.
Iguchi, Masahide; Saito, Toru; Kawano, Katsumi; Chida, Yutaka; Nakajima, Hideo; Ogawa, Tsuyoshi*; Katayama, Yoshinori*; Ogata, Hiroshige*; Minemura, Toshiyuki*; Tokai, Daisuke*; et al.
Fusion Engineering and Design, 88(9-10), p.2520 - 2524, 2013/10
Times Cited Count:12 Percentile:65.33(Nuclear Science & Technology)ITER TFC structures are large welding structures made of heavy thick stainless steels. JAEA plans to apply narrow gap TIG welding with FMYJJ1 which is full austenitic stainless filler material to manufacture TFC structure. FMYJJ1 is specified in "Codes for Fusion Facilities -Rules on Superconducting Magnet Structure (2008)". In order to evaluate effect of base material combinations and thickness of welded joint on tensile properties at 4 K, tensile tests were conducted at 4 K by using tensile specimens taken from 40 mm thickness weld joints of four combinations and 200 mm thickness ones of two combinations of base materials. These weld joints were manufactured by one side narrow gap TIG welding with FMYJJ1. As the results, it was confirmed that yield and tensile strengths of welded joint at 4K were decreased with decreasing of nitrogen of base material, and there were no large distribution of strengths at 4 K along the thickness of welded joints of 200 mm thickness.
Koyama, Shinichi; Suto, Mitsuo; Obayashi, Hiroshi; Takeshita, Kenji*; Ogata, Takeshi*; Oaki, Hiroshi*; Inaba, Yusuke*
Separation Science and Technology, 47(14-15), p.2024 - 2028, 2012/11
Times Cited Count:3 Percentile:15.48(Chemistry, Multidisciplinary)A series of separation experiments was performed to study the recovery process for minor actinides (MAs) from the actual spent fuel by using an extraction chromatographic technique. TPPEN gel was used as a new extraction chromatographic agent. Mixed oxide fuel was used as a reference spent fuel to demonstrate the recovery of the MAs. The MOX fuel, including 29.9 wt% plutonium (Pu), was irradiated up to 119 GWd/MTM, and the fuel was then prepared for the extraction experiment. A Mixed solution of MAs and lanthanides (Lns) was prepared. The TPPEN gel was immersed in a 0.01 M NaNO solution, and the pH was adjusted to 4.0. Next, an extraction column was prepared using the TPPEN gel, and the mixed solution of MAs and Lns was passed through the column. The Lns were detected in the eluent after washing with 0.01 M NaNO
(pH 4.0). For detecting the MAs, the pH of the eluent was changed to 2.0.
Iguchi, Masahide; Chida, Yutaka; Takano, Katsutoshi; Kawano, Katsumi; Saito, Toru; Nakajima, Hideo; Koizumi, Norikiyo; Minemura, Toshiyuki*; Ogata, Hiroshige*; Ogawa, Tsuyoshi*; et al.
IEEE Transactions on Applied Superconductivity, 22(3), p.4203305_1 - 4203305_5, 2012/06
Times Cited Count:10 Percentile:49.36(Engineering, Electrical & Electronic)Japan Atomic Energy Agency (JAEA) has responsibility to procure 19 structures for ITER toroidal field (TF) coils as in-kind components. JAEA plans to use materials specified in the material section of "Codes for Fusion Facilities; Rules on Superconducting Magnet Structure (2008)" issued by the Japan Society of Mechanical Engineers (JSME) in 2008. Large forged products were produced and their mechanical properties at 4K were evaluated. In addition, the following activities have been performed; (1) to optimize the design of each weld type identified in the manufacturing sequence, (2) to qualify typical welding procedure including repair, (3) to establish welding techniques other than narrow gap TIG welding with FMYJJ1, (4) to demonstrate the manufacturing procedures through manufacture of 1-m mockups and full-scale segments of TFC structure. This paper describes the results of material qualification and industrialization activities of manufacturing processes of ITER TFC structure.
Iguchi, Masahide; Chida, Yutaka; Nakajima, Hideo; Ogawa, Tsuyoshi*; Katayama, Yoshinori*; Ogata, Hiroshige*; Minemura, Toshiyuki*; Miyabe, Keisuke*; Tokai, Daisuke*; Niimi, Kenichiro*
Teion Kogaku, 47(3), p.193 - 199, 2012/03
Japan Atomic Energy Agency (JAEA) has conducted qualification and rationalization activities in Japan in order to rationalize manufacturing procedure of ITER Toroidal Field (TF) coil structures. The activities included qualification of structural materials and qualification of welding procedure according to Japan Society of Mechanical Engineers (JSME) code constituted for fusion devices, demonstration of the manufacturing method and procedures through full-scale segments of TF coil structure. From results of these activities, JAEA confirmed applicability of JSME code to actual series TF coil structures as quality control method hence the quality of structural materials and weld joints of Gas Tungsten Arc Welding (GTAW) were satisfied ITER requirement. In addition, JAEA obtained knowledge of welding deformation of actual TF coil structures. This paper describes results of these qualification and development activities for TF coil structure.
Saito, Junichi; Ara, Kuniaki; Sugiyama, Kenichiro*; Kitagawa, Hiroshi*; Nakano, Haruyuki*; Ogata, Kan*; Yoshioka, Naoki*
Proceedings of 16th International Conference on Nuclear Engineering (ICONE-16) (CD-ROM), 4 Pages, 2008/05
no abstracts in English
Ogata, Atsushi*; Okamoto, Hiromi*; Kusano, Kanya*; Endo, Ichita*; Nishida, Yasushi*; Sakae, Takeji*; Arai, Masatoshi*; Nakanishi, Hiroshi*; Kondo, Kiminori*
JAERI-Tech 2002-007, 28 Pages, 2002/03
no abstracts in English
Ishiyama, Shintaro; Muto, Yasushi; Ogata, Hiroshi*; Yamada, Seiya*
Nihon Genshiryoku Gakkai-Shi, 43(11), p.1136 - 1148, 2001/11
Times Cited Count:0 Percentile:0.00(Nuclear Science & Technology)no abstracts in English
Ishiyama, Shintaro; Muto, Yasushi; Ogata, Hiroshi*; Kamito, Yoshimi*
Nihon Genshiryoku Gakkai-Shi, 43(7), p.708 - 717, 2001/07
Times Cited Count:3 Percentile:26.77(Nuclear Science & Technology)no abstracts in English
Takahashi, Yoshikazu; Nunoya, Yoshihiko; Nishijima, Gen; Koizumi, Norikiyo; Matsui, Kunihiro; Ando, Toshinari; Hiyama, Tadao; Nakajima, Hideo; Kato, Takashi; Isono, Takaaki; et al.
IEEE Transactions on Applied Superconductivity, 10(1), p.580 - 583, 2000/03
Times Cited Count:20 Percentile:68.58(Engineering, Electrical & Electronic)no abstracts in English
Kando, Masaki; Ahn, H.; Dewa, Hidenori; Kotaki, Hideyuki; Ueda, Toru*; Uesaka, Mitsuru*; Watanabe, Takahiro*; Nakanishi, Hiroshi*; Ogata, Atsushi*; Nakajima, Kazuhisa
Japanese Journal of Applied Physics, Part 2, 38(8B), p.L967 - L969, 1999/08
Times Cited Count:24 Percentile:69.75(Physics, Applied)no abstracts in English
Ando, Toshinari; Hiyama, Tadao; Takahashi, Yoshikazu; Nakajima, Hideo; Kato, Takashi; Sugimoto, Makoto; Isono, Takaaki; Kawano, Katsumi; Koizumi, Norikiyo; Hamada, Kazuya; et al.
IEEE Transactions on Applied Superconductivity, 9(2), p.628 - 631, 1999/06
Times Cited Count:8 Percentile:51.28(Engineering, Electrical & Electronic)no abstracts in English
Kotaki, Hideyuki; Nakajima, Kazuhisa*; Kando, Masaki*; Dewa, Hidenori*; Kondo, Shuji; ; Watanabe, Takahiro*; Ueda, Toru*; Nakanishi, Hiroshi*; Yoshii, Koji*; et al.
Inst. Phys. Conf. Ser., (159), p.565 - 567, 1999/00
no abstracts in English