Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nishi, Tsuyoshi*; Sato, Rika*; Ota, Hiromichi*; Kokubo, Hiroki*; Yamano, Hidemasa
Journal of Nuclear Materials, 552, p.153002_1 - 153002_7, 2021/08
Times Cited Count:3 Percentile:31.78(Materials Science, Multidisciplinary)Determining high precision viscosities of molten BC-stainless steel (BC-SS) alloys is essential for the core disruptive accident analyses of sodium-cooled fast reactors and for analysis of severe accidents in boiling water reactors (BWR) as appeared in Fukushima Daiichi. However, there are no data on the high precision viscosities of molten BC-SS alloys due to experimental difficulties. In this study, the viscosities of molten SS (Type 316L), 2.5mass%BC-SS, 5.0mass%BC-SS, and 7.0mass%BC-SS alloys were measured using the oscillating crucible method in temperature ranges of 1693-1793 K, 1613-1793 K, 1613-1793 K, and 1713-1793 K, respectively. The viscosity was observed to increase as the BC concentration increased from 0 to 7.0 mass%. Using the experimental data of the molten 2.5mass%BC-SS and 5.0mass%BC-SS and 7.0mass%BC-SS in the temperature range of 1713-1793 K, the equation for the viscosity of molten BC-SS alloys was determined, and the measurement error of the viscosity of molten BC-SS alloys is less than 8%.
Ota, Hiromichi*; Kokubo, Hiroki*; Nishi, Tsuyoshi*; Yamano, Hidemasa
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.858 - 860, 2019/09
A viscosity measurement apparatus has been developed. It is known that the measurement of the viscosity of molten alloy at elevated temperatures is difficult due to the difficulty of handling for low viscosity fluids such as the stainless steel (SS)+BC alloy. In this study, the viscosities of the molten nickel (Ni) and stainless steel (SS) were measured by the oscillating crucible method to confirm the performance of the viscosity measurement apparatus as a first step. This method is suitable for high temperature molten alloys. A crucible containing molten metal is suspended, and a rotational oscillation is given to the crucible electromagnetically. The oscillation was damped by the friction of molten metal. The viscosity is determined from the period of oscillation and the logarithmic decrement. The crucible was connected to a mirror block and an inertia disk made of aluminum, and whole of them was suspended by a wire made of platinum-13% rhodium alloy. A laser light is irradiated to the mirror. The reflection light is detected by the photo-detectors, and then, the logarithmic decrement of molten metal is determined. The viscosities of molten nickel and SS melts were measured up to 1823 K. In these results, the measured viscosity values of molten Ni and SS were close to those of the literature values of molten Ni and SS. By the equipment, the viscosity of molten SS+BC alloys are measured. The BC concentration dependence of the viscosity of molten SS+BC alloys is to be clarified.
Kokubo, Hiroki*; Nishi, Tsuyoshi*; Ota, Hiromichi*; Yamano, Hidemasa
Nihon Kinzoku Gakkai-Shi, 82(10), p.400 - 402, 2018/09
Times Cited Count:7 Percentile:36.72(Metallurgy & Metallurgical Engineering)It is important to obtain the viscosity of a mixed alloy consisting of molten stainless steel and boron-carbide (SUS316L + BC alloy) for the improvement of severe accident assessment methodology for sodium-cooled fast reactors. In this study, the viscosities of the molten nickel (Ni) and stainless steel (SUS316L) were measured by the oscillating crucible method to confirm the performance of the viscosity measurement apparatus as a first step. The viscosities of molten Ni and SUS316L melts were measured up to 1823 K. It was found that the measured viscosity values of molten Ni and SUS316L were estimated from the deviation of the experimental data, were 4% and 3%, respectively. It was also found that those of molten Ni and SUS316L were close to those of the literature values of molten Ni and similar composite stainless steels. Moreover, we tentatively measured the viscosity of molten SUS316L-5 mass%BC alloy. The fitted results of the viscosity for molten Ni and SUS316L were obtained.
Tzeng, Y.-C.*; Onishi, Hiroaki; Okubo, Tsuyoshi*; Kao, Y.-J.*
Physical Review B, 96(6), p.060404_1 - 060404_7, 2017/08
Times Cited Count:24 Percentile:72.72(Materials Science, Multidisciplinary)Sakai, Takuro; Yasuda, Ryo; Iikura, Hiroshi; Nojima, Takehiro; Matsubayashi, Masahito; Kada, Wataru; Koka, Masashi; Sato, Takahiro; Okubo, Takeru; Ishii, Yasuyuki; et al.
Nuclear Instruments and Methods in Physics Research B, 306, p.299 - 301, 2013/07
Times Cited Count:7 Percentile:49.28(Instruments & Instrumentation)Miura, Kenta*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; Kiryu, Hiromu*; Ozawa, Yusuke*; Takano, Katsuyoshi*; Okubo, Takeru; Yamazaki, Akiyoshi; Kada, Wataru; et al.
JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 126, 2013/01
Miura, Kenta*; Sato, Takahiro; Ishii, Yasuyuki; Kiryu, Hiromu*; Ozawa, Yusuke*; Koka, Masashi; Takano, Katsuyoshi*; Okubo, Takeru; Yamazaki, Akiyoshi; Kada, Wataru; et al.
Key Engineering Materials, 534, p.158 - 161, 2013/00
Times Cited Count:5 Percentile:89.82(Nanoscience & Nanotechnology)Omichi, Masaaki*; Takano, Katsuyoshi*; Sato, Takahiro; Kamiya, Tomihiro; Ishii, Yasuyuki; Okubo, Takeru; Koka, Masashi; Kada, Wataru; Sugimoto, Masaki; Nishikawa, Hiroyuki*; et al.
Journal of Nanoscience and Nanotechnology, 12, p.7401 - 7404, 2012/09
Times Cited Count:2 Percentile:11.57(Chemistry, Multidisciplinary)Takano, Katsuyoshi*; Asano, Atsushi*; Maeyoshi, Yuta*; Marui, Hiromi*; Omichi, Masaaki*; Saeki, Akinori*; Seki, Shu*; Sato, Takahiro; Ishii, Yasuyuki; Kamiya, Tomihiro; et al.
Journal of Photopolymer Science and Technology, 25(1), p.43 - 46, 2012/07
Times Cited Count:2 Percentile:6.57(Polymer Science)Takano, Katsuyoshi*; Sugimoto, Masaki; Asano, Atsushi*; Maeyoshi, Yuta*; Marui, Hiromi*; Omichi, Masaaki*; Saeki, Akinori*; Seki, Shu*; Sato, Takahiro; Ishii, Yasuyuki; et al.
Transactions of the Materials Research Society of Japan, 37(2), p.237 - 240, 2012/06
Maeyoshi, Yuta*; Takano, Katsuyoshi*; Asano, Atsushi*; Marui, Hiromi*; Omichi, Masaaki*; Sato, Takahiro; Kamiya, Tomihiro; Ishii, Yasuyuki; Okubo, Takeru; Koka, Masashi; et al.
Japanese Journal of Applied Physics, 51(4R), p.045201_1 - 045201_4, 2012/04
Times Cited Count:1 Percentile:4.43(Physics, Applied)Takano, Katsuyoshi*; Sato, Takahiro; Kamiya, Tomihiro; Ishii, Yasuyuki; Okubo, Takeru; Koka, Masashi; Kada, Wataru; Sugimoto, Masaki; Seki, Shuhei*; Nishikawa, Hiroyuki*
JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 162, 2012/01
Miura, Kenta*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; Uehara, Masato*; Kiryu, Hiromu*; Takano, Katsuyoshi*; Okubo, Takeru; Yamazaki, Akiyoshi; Kada, Wataru; et al.
JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 126, 2012/01
Dobashi, Kunio*; Shimizu, Yasuo*; Matsuzaki, Shinichi*; Nagamine, Takeaki*; Sato, Takahiro; Okubo, Takeru; Yokoyama, Akihito; Ishii, Yasuyuki; Kamiya, Tomihiro; Arakawa, Kazuo*; et al.
JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 87, 2012/01
Miura, Kenta*; Machida, Yuki*; Uehara, Masato*; Kiryu, Hiromu*; Ozawa, Yusuke*; Sasaki, Tomoyuki*; Hanaizumi, Osamu*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; et al.
Key Engineering Materials, 497, p.147 - 150, 2012/00
Times Cited Count:7 Percentile:95.12(Engineering, Electrical & Electronic)Miura, Kenta*; Machida, Yuki*; Uehara, Masato*; Kiryu, Hiromu*; Ozawa, Yusuke*; Sasaki, Tomoyuki*; Hanaizumi, Osamu*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; et al.
Key Engineering Materials, 497, p.147 - 150, 2011/12
Times Cited Count:6 Percentile:2.48Takano, Katsuyoshi; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; Kamiya, Tomihiro; Okubo, Takeru; Sugimoto, Masaki; Nishikawa, Hiroyuki*; Seki, Shu*
Transactions of the Materials Research Society of Japan, 36(3), p.305 - 308, 2011/09
Matsuzaki, Shinichi*; Shimizu, Yasuo*; Dobashi, Kunio*; Nagamine, Takeaki*; Sato, Takahiro; Okubo, Takeru; Yokoyama, Akihito; Ishii, Yasuyuki; Kamiya, Tomihiro; Arakawa, Kazuo*; et al.
International Journal of Immunopathology and Pharmacology, 23(1), p.1 - 11, 2010/01
Kamiya, Tomihiro; Takano, Katsuyoshi; Ishii, Yasuyuki; Sato, Takahiro; Oikawa, Masakazu*; Okubo, Takeru; Haga, Junji*; Nishikawa, Hiroyuki*; Furuta, Yusuke*; Uchiya, Naoyuki*; et al.
Nuclear Instruments and Methods in Physics Research B, 267(12-13), p.2317 - 2320, 2009/06
Times Cited Count:7 Percentile:47.15(Instruments & Instrumentation)Okubo, Tsutomu; Araya, Fumimasa; Iwamura, Takamichi; Kusunoki, Tsuyoshi
Fourth Int. Seminar on Subchannel Analysis (ISSCA-4), p.267 - 286, 1997/00
no abstracts in English