Impact assessment for internal flooding in HTTR (High temperature engineering test reactor)

Tochio, Daisuke; Nagasumi, Satoru; Inoi, Hiroyuki; Hamamoto, Shimpei; Ono, Masato; Kobayashi, Shoichi; Uesaka, Takahiro; Watanabe, Shuji; Saito, Kenji

JAEA-Technology 2021-014, 80 Pages, 2021/09

JAEA-Technology-2021-014.pdf:5.87MB

In response to the new regulatory standards established in response to the accident at TEPCO's Fukushima Daiichi Nuclear Power Station in March 2011, measures and impact assessments related to internal flooding at HTTR were carried out. In assessing the impact, considering the characteristics of the high-temperature gas-cooled reactor, flooding due to assumed damage to piping and equipment, flooding due to water discharge from the system installed to prevent the spread of fire, and flooding due to damage to piping and equipment due to an earthquake. The effects of submersion, flooding, and flooding due to steam were evaluated for each of them. The impact of the overflow of liquids containing radioactive materials outside the radiation-controlled area was also evaluated. As a result, it was confirmed that flooding generated at HTTR does not affect the safety function of the reactor facility by taking measures.

Enhancement of element production by incomplete fusion reaction with weakly bound deuteron

Wang, H.*; Otsu, Hideaki*; Chiga, Nobuyuki*; Kawase, Shoichiro*; Takeuchi, Satoshi*; Sumikama, Toshiyuki*; Koyama, Shumpei*; Sakurai, Hiroyoshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; et al.

Communications Physics (Internet), 2(1), p.78_1 - 78_6, 2019/07

https://doi.org/10.1038/s42005-019-0165-1

Searching for effective pathways for the production of proton- and neutron-rich isotopes through an optimal combination of reaction mechanism and energy is one of the main driving forces behind experimental and theoretical nuclear reaction studies as well as for practical applications in nuclear transmutation of radioactive waste. We report on a study on incomplete fusion induced by deuteron, which contains one proton and one neutron with a weak binding energy and is easily broken up. This reaction study was achieved by measuring directly the cross sections for both proton and deuteron for Pd at 50 MeV/u via inverse kinematics technique. The results provide direct experimental evidence for the onset of a cross-section enhancement at high energy, indicating the potential of incomplete fusion induced by loosely-bound nuclei for creating proton-rich isotopes and nuclear transmutation of radioactive waste.

Design of HTTR-GT/H test plant

Yan, X.; Sato, Hiroyuki; Sumita, Junya; Nomoto, Yasunobu*; Horii, Shoichi*; Imai, Yoshiyuki; Kasahara, Seiji; Suzuki, Koichi*; Iwatsuki, Jin; Terada, Atsuhiko; et al.

Nuclear Engineering and Design, 329, p.223 - 233, 2018/04

https://doi.org/10.1016/j.nucengdes.2017.10.009

The pre-licensing design of an HTGR cogeneration test plant to be coupled to JAEA's existing test reactor HTTR is presented. The plant is designed to demonstrate the system of JAEA commercial plant design GTHTR300C. With construction planned to be completed around 2025, the test plant is expected to be the first-of-a-kind nuclear system operating on two of the advanced energy conversion systems attractive for the HTGR closed cycle helium gas turbine for power generation and thermochemical iodine-sulfur water-splitting process for hydrogen production.

Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions

Yano, Yasuhide; Tanno, Takashi; Oka, Hiroshi; Otsuka, Satoshi; Inoue, Toshihiko; Kato, Shoichi; Furukawa, Tomohiro; Uwaba, Tomoyuki; Kaito, Takeji; Ukai, Shigeharu*; et al.

Journal of Nuclear Materials, 487, p.229 - 237, 2017/04

https://doi.org/10.1016/j.jnucmat.2017.02.021

Ultra-high temperature ring tensile tests were carried out to investigate the tensile behavior of oxide dispersion strengthened (ODS) steel claddings and wrapper materials under severe accident conditions; temperatures ranged from room temperature to 1400C which is near the melting point of core materials. The experimental results showed that tensile strength of 9Cr-ODS steel claddings was highest in the core materials at the ultra-high temperatures between 900 and 1200C, but that there was significant degradation in tensile strength of 9Cr-ODS steel claddings above 1200C. This degradation was attributed to grain boundary sliding deformation with / transformation, which was associated with reduced ductility. On the other hand, tensile strength of recrystallized 12Cr-ODS and FeCrAl-ODS steel claddings retained its high value above 1200 C unlike the other tested materials. Present study includes the result of "R&D of ODS ferritic steel fuel cladding for maintaining fuel integrity at the high temperature accident condition" entrusted to Hokkaido University by the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT).

Verification of alternative dew point hygrometer for CV-LRT in Monju

Ichikawa, Shoichi; Chiba, Yusuke; Ono, Fumiyasu; Hatori, Masakazu; Kobayashi, Takanori; Uekura, Ryoichi; Hashiri, Nobuo*; Inuzuka, Taisuke*; Kitano, Hiroshi*; Abe, Hisashi*

JAEA-Research 2016-021, 32 Pages, 2017/02

JAEA-Research-2016-021.pdf:5.0MB

In order to reduce the influence on a plant schedule of the MONJU by the maintenance of dew point hygrometers, The JAEA examined a capacitance type dew point hygrometer as an alternative dew point hygrometer for a lithium-chloride type dew point hygrometer which had been used at the CV-LRT in the MONJU. As a result of comparing a capacitance type dew point hygrometer with a lithium-chloride type dew point hygrometer at the CV-LRT (Atmosphere: nitrogen, Testing time: 24 hours), there weren't significant difference between a capacitance type dew point hygrometer and a lithium-chloride type dew point hygrometer. As a result of comparing a capacitance dew point hygrometer with a high-mirror-surface type dew point hygrometer for long term verification (Atmosphere: air, Testing time: 24 months), the JAEA confirmed that a capacitance type dew point hygrometer satisfied the instrument specification (2.04C) required by the JEAC4203-2008.

Characterization of monolayer oxide formation processes on high-index Si surface by photoelectron spectroscopy with synchrotron radiation

Abe, Sosuke*; Ono, Shinya*; Kanemura, Rui*; Yoshigoe, Akitaka; Teraoka, Yuden; Ogata, Shoichi*; Yasuda, Tetsuji*; Tanaka, Masatoshi*

Applied Physics Express, 6(11), p.115701_1 - 115701_4, 2013/11

https://doi.org/10.7567/APEX.6.115701

Removal of cesium using cobalt-ferrocyanide-impregnated polymer-chain-grafted fibers

Ishihara, Ryo*; Fujiwara, Kunio*; Harayama, Takato*; Okamura, Yusuke*; Uchiyama, Shoichiro*; Sugiyama, Mai*; Someya, Takaaki*; Amakai, Wataru*; Umino, Satoshi*; Ono, Tsubasa*; et al.

Journal of Nuclear Science and Technology, 48(10), p.1281 - 1284, 2011/10

AA2011-0190.pdf:0.45MB

https://doi.org/10.3327/jnst.48.1281

Sequence analysis of the gliding protein Gli349 in

Metsugi. Shoichi; Uenoyama, Atsuko*; Kubo, Jun*; Miyata, Makoto*; Yura, Kei; Kono, Hidetoshi; Go, Nobuhiro

Biophysics, 1, p.33 - 43, 2005/05

https://doi.org/10.2142/biophysics.1.33

The motile mechanism of Mycoplasma mobile remains unknown but is believed to differ from any previously identified mechanism in bacteria. Gli349 of M. mobile is known to be responsible for both adhesion to glass surfaces and mobility. We therefore carried out sequence analyses of Gli349 and its homolog MYPU2110 from M. pulmonis to decipher their structures. We found that the motif "YxxxxxGF" appears 11 times in Gli349 and 16 times in MYPU2110. Further analysis of the sequences revealed that Gli349 contains 18 repeats of about 100 amino acid residues each, and MYPU2110 contains 22. No sequence homologous to any of the repeats was found in the NCBI RefSeq non-redundant sequence database, and no compatible fold structure was found among known protein structures, suggesting that the repeat found in Gli349 and MYPU2110 is novel and takes a new fold structure. Proteolysis of Gli349 using chymotrypsin revealed that cleavage positions were often located between the repeats, implying that regions connecting repeats are unstructured, flexible and exposed to the solvent.

Crystallization of an amorphous layer in P-implanted 6H-SiC studied by monoenergetic positron beams

Uedono, Akira*; Tanigawa, Shoichiro*; Oshima, Takeshi; Ito, Hisayoshi; Yoshikawa, Masahito; Nashiyama, Isamu; Frank, T.*; Pensl, G.*; Suzuki, Ryoichi*; Odaira, Toshiyuki*; et al.

Journal of Applied Physics, 87(9), p.4119 - 4125, 2000/05

https://doi.org/10.1063/1.373039

no abstracts in English

Study of residual defects in ion-implanted and subsequently annealed 3C-SiC

Oshima, Takeshi; Ito, Hisayoshi; Uedono, Akira*; Suzuki, Ryoichi*; Ishida, Yuki*; Takahashi, Tetsuo*; Yoshikawa, Masahito; Kojima, Kazutoshi; Odaira, Toshiyuki*; Nashiyama, Isamu; et al.

Denshi Gijutsu Sogo Kenkyujo Iho, 62(10-11), p.469 - 476, 1999/00

no abstracts in English