Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Takahashi, Yoshikazu; Suwa, Tomone; Nabara, Yoshihiro; Ozeki, Hidemasa; Hemmi, Tsutomu; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; Kawano, Katsumi; Oshikiri, Masayuki; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4200904_1 - 4200904_4, 2015/06
Times Cited Count：3 Percentile：20.23(Engineering, Electrical & Electronic)The Japan Atomic Energy Agency (JAEA) is responsible for procuring all amounts of Central Solenoid (CS) Conductors for ITER, including CS jacket sections. The conductor is cable-in-conduit conductor (CICC) with a central spiral. A total of 576 Nb
Sn strands and 288 copper strands are cabled around the central spiral. The maximum operating current is 40 kA at magnetic field of 13 T. CS jacket section is circular in square type tube made of JK2LB, which is high manganese stainless steel with boron added. Unit length of jacket sections is 7 m and 6,300 sections will be manufactured and inspected. Outer/inner dimension and weight are 51.3/35.3 mm and around 90 kg, respectively. Eddy Current Test (ECT) and Phased Array Ultrasonic Test (PAUT) were developed for non-destructive examination. The defects on inner and outer surfaces can be detected by ECT. The defects inside jacket section can be detected by PAUT. These technology and the inspected results are reported in this paper.
Sn cable assembled with conduit for ITER central solenoidNabara, Yoshihiro; Suwa, Tomone; Takahashi, Yoshikazu; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Sakurai, Takeru; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; et al.
IEEE Transactions on Applied Superconductivity, 25(3), p.4200305_1 - 4200305_5, 2015/06
Times Cited Count：0 Percentile：0(Engineering, Electrical & Electronic)
Sn conductors for toroidal field coils in ITERNabara, Yoshihiro; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Suwa, Tomone; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; Koizumi, Norikiyo; et al.
IEEE Transactions on Applied Superconductivity, 24(3), p.6000605_1 - 6000605_5, 2014/06
Times Cited Count：7 Percentile：39.51(Engineering, Electrical & Electronic)no abstracts in English
Sn conductor for ITER central solenoidTakahashi, Yoshikazu; Nabara, Yoshihiro; Ozeki, Hidemasa; Hemmi, Tsutomu; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; Kawano, Katsumi; Oshikiri, Masayuki; Uno, Yasuhiro; et al.
IEEE Transactions on Applied Superconductivity, 24(3), p.4802404_1 - 4802404_4, 2014/06
Times Cited Count：25 Percentile：72.88(Engineering, Electrical & Electronic)Japan Atomic Energy Agency (JAEA) is procuring all amounts of NbSn conductors for Central Solenoid (CS) in the ITER project. Before start of mass-productions, the conductor should be tested to confirm superconducting performance in the SULTAN facility, Switzerland. The original design of cabling twist pitches is 45-85-145-250-450 mm, called normal twist pitch (NTP). The test results of the conductors with NTP was that current shearing temperature (Tcs) is decreasing due to electro-magnetic (EM) load cycles. On the other hand, the results of the conductors with short twist pitches (STP) of 25-45-80-150-450 mm show that the Tcs is stabilized during EM load cyclic tests. Because the conductors with STP have smaller void fraction, higher compaction ratio during cabling is required and possibility of damage on strands increases. The technology for the cables with STP was developed in Japanese cabling suppliers. The several key technologies will be described in this paper.
Sn conductors for ITER central solenoidsNabara, Yoshihiro; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; Takahashi, Yoshikazu; Matsui, Kunihiro; Koizumi, Norikiyo; et al.
IEEE Transactions on Applied Superconductivity, 23(3), p.4801604_1 - 4801604_4, 2013/06
Times Cited Count：10 Percentile：48(Engineering, Electrical & Electronic)no abstracts in English
Okamura, Masachika*; Nakayama, Masayoshi*; Umemoto, Naoyuki*; Cano, E. A.*; Hase, Yoshihiro; Nishizaki, Yuzo*; Sasaki, Nobuhiro*; Ozeki, Yoshihiro*
Euphytica, 191(1), p.45 - 56, 2013/05
Times Cited Count：28 Percentile：80.53(Agronomy)A few carnation cultivars are known to display a peculiar dusky color supposedly caused by anthocyanic vacuolar inclusions (AVIs). The hereditary pattern suggests that the peculiar color is controlled by a single recessive factor tightly linked with existence of AVIs containing non-acylated anthocyanins. To diversify the peculiar color carnation, we produced a bluish purple line displaying a highly novel metallic appearance by crossbreeding. By subjecting the line to ion-beam irradiation, we generated metallic reddish purple, metallic crimson and metallic red lines. All four metallic lines did not have transcripts for anthocyanin malyltransferase. In contrast to the dusky color types, metallic lines have highly condensed AVIs and water-clear vacuolar sap in the petal adaxial epidermal cells. We demonstrated that (1) a factor generating the AVIs is inactivated anthocyanin malyltransferase gene, (2) AVIs in water-clear vacuolar sap in the adaxial epidermal cells generate the novel metallic appearance, and (3) ion beam breeding is a useful tool for increasing metallic colors by changing anthocyanin structure and the level of AVIs.
Terunuma, Tomohiro; Ozeki, Tatsuya; Fukuari, Yoshihiro
Nihon Hozen Gakkai Dai-5-Kai Gakujutsu Koenkai Yoshishu, p.129 - 132, 2008/07
The two dissolvers installed in the Tokai reprocessing plant had failed occurred successively in 1982 and 1983. Then, remote-controlled equipment for repair and inspection has been developed because the dissolvers were installed under the high dose of radiation and cannot access easily. After repair of the dissolvers, the periodic inspection by remoteness is periodically carried out once per year for soundness confirmation of the vessels. Moreover, the remote inspection equipment for periodic inspection was developed, which time required for inspection is too short compared with former equipment.
Kikuchi, Mitsuru; Seki, Yasushi; Oikawa, Akira; Ando, Toshinari; Ohara, Yoshihiro; Nishio, Satoshi; Seki, Masahiro; Takizuka, Tomonori; Tani, Keiji; Ozeki, Takahisa; et al.
Fusion Engineering and Design, 18, p.195 - 202, 1991/00
Times Cited Count：8 Percentile：66.05(Nuclear Science & Technology)no abstracts in English
Nabara, Yoshihiro; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; Koizumi, Norikiyo; Tsutsumi, Fumiaki; et al.
no journal, ,
no abstracts in English
Sn cables for ITER central solenoid (CS) coilTakahashi, Yoshikazu; Nabara, Yoshihiro; Ozeki, Hidemasa; Hemmi, Tsutomu; Nunoya, Yoshihiko; Isono, Takaaki; Oshikiri, Masayuki; Tsutsumi, Fumiaki; Uno, Yasuhiro; Shibutani, Kazuyuki*; et al.
no journal, ,
Japan Atomic Energy Agency (JAEA) is procuring all amounts of NbSn conductors for Central Solenoid (CS) in the ITER project. Before start of mass-productions, the conductor should be tested to confirm superconducting performance in the SULTAN facility, Switzerland. The original design of cabling twist pitches is 45-85-145-250-450 mm, called normal twist pitch (NTP). The test results of the conductors with NTP was that current shearing temperature (Tcs) is decreasing due to electro-magnetic (EM) load cycles. On the other hand, the results of the conductors with short twist pitches (STP) of 25-45-80-150-450 show that the Tcs is stabilized during EM load cyclic tests. Because the conductors with STP have smaller void fraction, higher compaction ratio during cabling is required and possibility of damage on strands increases. The technology for the cables with STP was developed in Japanese cabling suppliers. The several key technologies will be described in this paper.
Sn superconductor for ITER CS coilNabara, Yoshihiro; Suwa, Tomone; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Sakurai, Takeru; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; et al.
no journal, ,
no abstracts in English
Takahashi, Yoshikazu; Nabara, Yoshihiro; Nunoya, Yoshihiko; Suwa, Tomone; Tsutsumi, Fumiaki; Oshikiri, Masayuki; Ozeki, Hidemasa; Shibutani, Kazuyuki*; Kawano, Katsumi; Kawasaki, Tsutomu*; et al.
no journal, ,
Japan Atomic Energy Agency (JAEA) is procuring all amounts of NbSn conductors for Central Solenoid (CS) in the ITER project. Before start of mass-productions, the conductor should be tested to confirm superconducting performance in the SULTAN facility, Switzerland. The cable with a shorter twist pitch shows no degradation of Tcs against to electromagnetic load cycles. However, it is difficult to make the cable, because the diameter of the cable with shorter twist pitch is larger and the cable has to compact more. The technology for the cables with STP was developed in Japanese cabling suppliers. The several key technologies and production will be described in this paper.
Takahashi, Yoshikazu; Suwa, Tomone; Nabara, Yoshihiro; Ozeki, Hidemasa; Nunoya, Yoshihiko; Oshikiri, Masayuki; Tsutsumi, Fumiaki; Takamura, Jun; Shibutani, Kazuyuki*; Chuheishi, Shinji; et al.
no journal, ,
The Japan Atomic Energy Agency (JAEA) is responsible for procuring all amounts of Central Solenoid (CS) Conductors for ITER, including CS jacket sections. The conductor is cable-in-conduit conductor (CICC) with a central spiral. A total of 576 NbSn strands and 288 copper strands are cabled around the central spiral. The maximum operating current is 40 kA at magnetic field of 13 T. CS jacket section is circular in square type tube made of JK2LB, which is high manganese stainless steel with boron added. Unit length of jacket sections is 7 m and 6,300 sections will be manufactured and inspected. Outer/inner dimension and weight are 51.3/35.3 mm and around 90 kg, respectively. Eddy Current Test (ECT) and Phased Array Ultrasonic Test (PAUT) were developed for non-destructive examination. The defects on inner and outer surfaces can be detected by ECT. The defects inside jacket section can be detected by PAUT. These technology and the inspected results are reported in this paper.
Nabara, Yoshihiro; Suwa, Tomone; Hemmi, Tsutomu; Kajitani, Hideki; Ozeki, Hidemasa; Sakurai, Takeru; Iguchi, Masahide; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; et al.
no journal, ,
no abstracts in English
Nabara, Yoshihiro; Suwa, Tomone; Ozeki, Hidemasa; Sakurai, Takeru; Kajitani, Hideki; Iguchi, Masahide; Hemmi, Tsutomu; Nunoya, Yoshihiko; Isono, Takaaki; Matsui, Kunihiro; et al.
no journal, ,
no abstracts in English
Nabara, Yoshihiro; Suwa, Tomone; Ozeki, Hidemasa; Sakurai, Takeru; Kajitani, Hideki; Iguchi, Masahide; Hemmi, Tsutomu; Shimono, Mitsugu; Ebisawa, Noboru; Sato, Minoru; et al.
no journal, ,
no abstracts in English
Isono, Takaaki; Kawano, Katsumi; Ozeki, Hidemasa; Saito, Toru; Nabara, Yoshihiro; Suwa, Tomone; Shimono, Mitsugu; Ebisawa, Noboru; Sato, Minoru; Uno, Yasuhiro; et al.
no journal, ,
JAEA is procuring conductors for ITER Central Solenoid (CS) and has evaluated its superconducting performance using CS Model Coil Test facility. We measured Tcs values during cyclic charge of 16,000 cycles and warm-up and cool-down cycle of 3 times. And we measured effect of coil deformation by electro-magnetic force on Tcs values and performed quench test. In this presentation, test method will be reported.
Ozeki, Hidemasa; Suwa, Tomone; Isono, Takaaki; Takahashi, Yoshikazu; Kawano, Katsumi; Nabara, Yoshihiro; Saito, Toru; Nunoya, Yoshihiko
no journal, ,
no abstracts in English
Saito, Toru; Ozeki, Hidemasa; Suwa, Tomone; Nabara, Yoshihiro; Kawano, Katsumi; Takahashi, Yoshikazu; Isono, Takaaki; Nunoya, Yoshihiko
no journal, ,
no abstracts in English
Sn CICCSuwa, Tomone; Ozeki, Hidemasa; Nabara, Yoshihiro; Saito, Toru*; Kawano, Katsumi; Takahashi, Yoshikazu; Isono, Takaaki; Nunoya, Yoshihiko
no journal, ,
no abstracts in English
