Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
island of inversion; First study of low-lying bound excited states in 
V and 
VElekes, Z.*; Juh
sz, M. M.*; Sohler, D.*; Sieja, K.*; Yoshida, Kazuki; Ogata, Kazuyuki*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; Baba, Hidetada*; et al.
Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12
Times Cited Count：0The low-lying level structure of V and V was investigated for the first time. The neutron knockout reaction and inelastic proton scattering were applied for V while the neutron knock-out reaction provided the data for V. Four and five new transitions were determined for V and V, respectively. Based on the comparison to our shell-model calculations using the Lenzi-Nowacki-Poves-Sieja (LNPS) interaction, three of the observed 
rays for each isotope could be placed in the level scheme and assigned to the decay of the first 11/2
and 9/2 levels. The (
,
) excitation cross sections for V were analyzed by the coupled-channels formalism assuming quadrupole plus hexadecapole deformations. Due to the role of the hexadecapole deformation, V could not be unambiguously placed on the island of inversion.
neutron orbital and the 
shell closure in 
CaEnciu, M.*; Liu, H. N.*; Obertelli, A.*; Doornenbal, P.*; Nowacki, F.*; Ogata, Kazuyuki*; Poves, A.*; Yoshida, Kazuki; Achouri, N. L.*; Baba, Hidetada*; et al.
Physical Review Letters, 129(26), p.262501_1 - 262501_7, 2022/12
Times Cited Count：0 Percentile：0(Physics, Multidisciplinary)The one-neutron knockout from Ca was performed at 
230 MeV/nucleon combined with prompt spectroscopy. The momentum distributions corresponding to the removal of 
and 
neutrons were measured. The cross sections are consistent with a shell closure at the neutron number , found as strong as at 
and 
in Ca isotopes from the same observables. The analysis of the momentum distributions leads to a difference of the root-mean-square radii of the neutron 
and orbitals of 0.61(23) fm, in agreement with the modified-shell-model prediction of 0.7 fm suggesting that the large root-mean-square radius of the orbital in neutron-rich Ca isotopes is responsible for the unexpected linear increase of the charge radius with the neutron number.
Ca; Spectroscopy of 
K, Ca, and 
CaKoiwai, Takuma*; Wimmer, K.*; Doornenbal, P.*; Obertelli, A.*; Barbieri, C.*; Duguet, T.*; Holt, J. D.*; Miyagi, Takayuki*; Navrtil, P.*; Ogata, Kazuyuki*; et al.
Physics Letters B, 827, p.136953_1 - 136953_7, 2022/04
Times Cited Count：2 Percentile：67.14(Astronomy & Astrophysics)no abstracts in English
Cl isotopesLinh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Chen, S.*; Chung, L. X.*; Duguet, T.*; G
mez-Ramos, M.*; et al.
Physical Review C, 104(4), p.044331_1 - 044331_16, 2021/10
Times Cited Count：2 Percentile：32.08(Physics, Nuclear)no abstracts in English
Ca from direct reactionsBrowne, F.*; Chen, S.*; Doornenbal, P.*; Obertelli, A.*; Ogata, Kazuyuki*; Utsuno, Yutaka; Yoshida, Kazuki; Achouri, N. L.*; Baba, Hidetada*; Calvet, D.*; et al.
Physical Review Letters, 126(25), p.252501_1 - 252501_7, 2021/06
Times Cited Count：4 Percentile：45.66(Physics, Multidisciplinary)Direct proton-knockout reactions of Sc were studied at the RIKEN Radioactive Isotope Beam Factory. Populated states of Ca were investigated through -ray and invariant-mass spectroscopy. Level energies were calculated from the nuclear shell model employing a phenomenological inter-nucleon interaction. Theoretical cross sections to states were calculated from distorted-wave impulse approximation estimates multiplied by the shell model spectroscopic factors. Despite the calculations showing a significant amplitude of excited neutron configurations in the ground-state of Sc, valence proton removals populated predominantly the ground-state of Ca. This counter-intuitive result is attributed to pairing effects leading to a dominance of the ground-state spectroscopic factor. Owing to the ubiquity of the pairing interaction, this argument should be generally applicable to direct knockout reactions from odd-even to even-even nuclei.
Ar by the (,2) reactionJuhsz, M. M.*; Elekes, Z.*; Sohler, D.*; Utsuno, Yutaka; Yoshida, Kazuki; Otsuka, Takaharu*; Ogata, Kazuyuki*; Doornenbal, P.*; Obertelli, A.*; Baba, Hidetada*; et al.
Physics Letters B, 814, p.136108_1 - 136108_8, 2021/03
Times Cited Count：2 Percentile：32.08(Astronomy & Astrophysics)The nuclear structure of Ar was studied by the (,2) reaction using -ray spectroscopy for the bound and unbound states. Comparing the results to our shell-model calculations, two bound and six unbound states were established. The low cross sections populating the two bound states of Ar could be interpreted as a clear signature for the presence of significant sub-shell closures at neutron numbers 32 and 34 in argon isotopes.
= 32 shell closure below calcium; Low-lying structure of 
ArCort
s, M. L.*; Rodriguez, W.*; Doornenbal, P.*; Obertelli, A.*; Holt, J. D.*; Menndez, J.*; Ogata, Kazuyuki*; Schwenk, A.*; Shimizu, Noritaka*; Simonis, J.*; et al.
Physical Review C, 102(6), p.064320_1 - 064320_9, 2020/12
Times Cited Count：7 Percentile：71.34(Physics, Nuclear)Low-lying excited states in the = 32 isotope Ar were investigated by in-beam -ray spectroscopy following proton- and neutron-knockout, multinucleon removal, and proton inelastic scattering at the RIKEN Radioactive Isotope Beam Factory. The energies of the two previously reported transitions have been confirmed, and five additional states are presented for the first time, including a candidate for a 3 state. The level scheme built using coincidences was compared to shell-model calculations in the 
model space and to 
predictions based on chiral two- and three-nucleon interactions. Theoretical proton- and neutron-knockout cross sections suggest that two of the new transitions correspond to 2
states, while the previously proposed 4
state could also correspond to a 2 state.
= 40 isotones towards 
Ca; First spectroscopy of 
TiCorts, M. L.*; Rodriguez, W.*; Doornenbal, P.*; Obertelli, A.*; Holt, J. D.*; Lenzi, S. M.*; Menndez, J.*; Nowacki, F.*; Ogata, Kazuyuki*; Poves, A.*; et al.
Physics Letters B, 800, p.135071_1 - 135071_7, 2020/01
Times Cited Count：22 Percentile：96.25(Astronomy & Astrophysics)Excited states in the = 40 isotone Ti were populated via the 
V(,
)Ti reaction at 200 MeV/nucleon at the Radioactive Isotope Beam Factory and studied using -ray spectroscopy. The energies of the 
and 
transitions, observed here for the first time, indicate a deformed Ti ground state. These energies are increased compared to the neighboring 
Cr and 
Fe isotones, suggesting a small decrease of quadrupole collectivity. The present measurement is well reproduced by large-scale shell-model calculations based on effective interactions, while ab initio and beyond mean-field calculations do not yet reproduce our findings.
Ca corroborates arising 
neutron magic numberChen, S.*; Lee, J.*; Doornenbal, P.*; Obertelli, A.*; Barbieri, C.*; Chazono, Yoshiki*; Navrtil, P.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Raimondi, F.*; et al.
Physical Review Letters, 123(14), p.142501_1 - 142501_7, 2019/10
Times Cited Count：37 Percentile：92.75(Physics, Multidisciplinary)no abstracts in English
Kondo, Hiroo*; Kanemura, Takuji*; Park, C. H.*; Oyaizu, Makoto*; Hirakawa, Yasushi; Furukawa, Tomohiro
Fusion Engineering and Design, 146(Part A), p.285 - 288, 2019/09
Times Cited Count：1 Percentile：14.17(Nuclear Science & Technology)Herein, the wall shear stress in a double contraction nozzle has been evaluated experimentally to produce a liquid lithium (Li) target as a beam target for intense fusion neutron sources such as the International Fusion Materials Irradiation Facility (IFMIF), the Advanced Fusion Neutron Source (A-FNS), and the DEMO Oriented Neutron Source (DONES). The boundary layer thickness and wall shear stress are essential physical parameters to understand erosion-corrosion by the high-speed liquid Li flow in the nozzle, which is the key component in producing a stable Li target. Therefore, these parameters were experimentally evaluated using an acrylic mock-up of the target assembly. The velocity distribution in the nozzle was measured by a laser-doppler velocimeter and the momentum thickness along the nozzle wall was calculated using an empirical prediction method. The resulting momentum thickness was used to estimate the variation of the wall shear stress along the nozzle wall. Consequently, the wall shear stress was at the maximum in the second convergent section in front of the nozzle exit.
Ho, D. M. L.*; Nelwamondo, A. N.*; Okubo, Ayako; Rameb
ck, H.*; Song, K.*; Han, S.-H.*; Hancke, J. J.*; Holmgren, S.*; Jonsson, S.*; Kataoka, Osamu; et al.
Journal of Radioanalytical and Nuclear Chemistry, 315(2), p.353 - 363, 2018/02
Times Cited Count：1 Percentile：13.31(Chemistry, Analytical)The Fourth Collaborative Material Exercise (CMX-4) of the Nuclear Forensics International Technical Working Group (ITWG) registered the largest participation for this exercise in nuclear forensics, with seven of the 17 laboratories participating for the first time. In this paper, participants from five of the first-time laboratories shared their individual experience in this exercise, from preparation to analysis of samples. The exercise proved to be highly useful for testing procedures, repurposing established methods, exercising skills, and improving the understanding of nuclear forensic signatures and their interpretation trough the post-exercise review meeting.
Vostner, A.*; Pong, I.*; Bessette, D.*; Devred, A.*; Sgobba, S.*; Jung, A.*; Weiss, K.-P.*; Jewell, M. C.*; Liu, S.*; Yu, W.*; et al.
IEEE Transactions on Applied Superconductivity, 23(3), p.9500705_1 - 9500705_5, 2013/06
Times Cited Count：11 Percentile：52.29(Engineering, Electrical & Electronic)The ITER Cable-In-Conduit Conductor (CICC) used in the superconducting magnet system consists of a cable made of 300 to 1440 strands housed in a stainless steel tube (a.k.a. jacket or conduit). There are circular, square, as well as circle-in-square jackets, made of either a very low carbon AISI 316LN grade stainless steel or a high Mn austenitic stainless steel developed for ITER called JK2LB. Selected mechanical properties of the base material and weld joint were tested at room temperature and/or cryogenic temperatures (
7 K). The Domestic Agencies (DAs) reference laboratories and the ITER-IO appointed reference laboratories, CERN and Karlsruhe Institute of Technology (KIT) performed mechanical tests. This paper will compare the test results (e.g. elongation to failure) from different laboratories.
Nakajima, Hideo; Hemmi, Tsutomu; Iguchi, Masahide; Nabara, Yoshihiro; Matsui, Kunihiro; Chida, Yutaka; Kajitani, Hideki; Takano, Katsutoshi; Isono, Takaaki; Koizumi, Norikiyo; et al.
Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 8 Pages, 2013/03
The ITER organization and 6 Domestic Agencies (DA) have been implementing the construction of ITER superconducting magnet systems. Four DAs have already started full scale construction of Toroidal Field (TF) coil conductors. The qualification of the radial plate manufacture has been completed, and JA and EU are ready for full scale construction. JA has qualified full manufacturing processes of the winding pack with a 1/3 prototype and made 2 full scale mock-ups of the basic segments of TF coil structure to optimize and industrialize the manufacturing process. Preparation and qualification of the full scale construction of the TF coil winding is underway by EU. Procurement of the manufacturing equipment is near completion and qualification of manufacturing processes has already started. The constructions of other components of the ITER magnet systems are also going well towards the main goal of the first plasma in 2020.
Yoon, S. W.*; Ahn, J.-W.*; Jeon, Y. M.*; Suzuki, Takahiro; Hahn, S. H.*; Ko, W. H.*; Lee, K. D.*; Chung, J. I.*; Nam, Y. U.*; Kim, J.*; et al.
Nuclear Fusion, 51(11), p.113009_1 - 113009_9, 2011/11
Times Cited Count：31 Percentile：79.01(Physics, Fluids & Plasmas)Typical ELMy H-mode discharges have been achieved on the KSTAR tokamak with the combined auxiliary heating of NBI and ECRH. The minimum external heating power required is about 1.1 MW at a line-averaged density higher than 1.4
10
m
and a toroidal field of 2 T. There is a clear indication of the increase of the L-H threshold power at densities lower than 
. The initial analysis of energy confinement time (
) predicted that was higher than the prediction of multi-machine scaling laws by a factor 1.4-1.6. However, when the contribution of fast ion confinement to the total energy was taken into account, better agreed with the scaling results. A clear increase of electron and ion temperature in the pedestal was observed in the H-mode phase but the core ion temperature did not change significantly. On the other hand, the toroidal rotation also increased over all radii in the H-mode phase. The measured ELM frequency was from 30-50 Hz and the drop of total energy appeared to be less than 5%. Between large ELM spikes, small/grassy ELMs were also identified when mixed heating of NBI and ECRH was applied.
Schaffer, M. J.*; Snipes, J. A.*; Gohil, P.*; de Vries, P.*; Evans, T. E.*; Fenstermacher, M. E.*; Gao, X.*; Garofalo, A. M.*; Gates, D. A.*; Greenfield, C. M.*; et al.
Nuclear Fusion, 51(10), p.103028_1 - 103028_11, 2011/10
Times Cited Count：33 Percentile：80.72(Physics, Fluids & Plasmas)Experiments at DIII-D investigated the effects of ferromagnetic error fields similar to those expected from proposed ITER Test Blanket Modules (TBMs). Studied were effects on: plasma rotation and locking; confinement; L-H transition; edge localized mode (ELM) suppression by resonant magnetic perturbations; ELMs and the H-mode pedestal; energetic particle losses; and more. The experiments used a 3-coil mock-up of 2 magnetized ITER TBMs in one ITER equatorial port. The experiments did not reveal any effect likely to preclude ITER operations with a TBM-like error field. The largest effect was slowed plasma toroidal rotation v across the entire radial profile by as much as 
via non-resonant braking. Changes to global 
, 
and 
were 3 times smaller. These effects are stronger at higher 
and lower 
. Other effects were smaller.
collisions at 
= 200 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 84(1), p.012006_1 - 012006_18, 2011/07
Times Cited Count：26 Percentile：70.48(Astronomy & Astrophysics)We report on the event structure and double helicity asymmetry (
) of jet production in longitudinally polarized collisions at = 200 GeV. Photons and charged particles were measured by the PHENIX experiment. Event structure was compared with the results from PYTHIA event generator. The production rate of reconstructed jets is satisfactorily reproduced with the next-to-leading-order perturbative QCD calculation. We measured = -0.0014 
0.0037 at the lowest 
bin and -0.0181 0.0282 at the highest bin. The measured is compared with the predictions that assume various 
distributions.
collisions at = 200 and 62.4 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06
Times Cited Count：169 Percentile：99.44(Physics, Nuclear)Transverse momentum distributions and yields for 
, and 
in collisions at = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different collisions. We also present the scaling properties such as 
and 
scaling and discuss the mechanism of the particle production in collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.
and Au+Au collisions at 
= 200 GeVAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Aramaki, Y.*; et al.
Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04
Times Cited Count：8 Percentile：51.17(Physics, Nuclear)Measurements of electrons from the decay of open-heavy-flavor mesons have shown that the yields are suppressed in Au+Au collisions compared to expectations from binary-scaled collisions. Here we extend these studies to two particle correlations where one particle is an electron from the decay of a heavy flavor meson and the other is a charged hadron from either the decay of the heavy meson or from jet fragmentation. These measurements provide more detailed information about the interaction between heavy quarks and the quark-gluon matter. We find the away-side-jet shape and yield to be modified in Au+Au collisions compared to collisions.
+ collisions at = 200 GeV and scaling properties of hadron productionAdare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03
Times Cited Count：161 Percentile：98.47(Astronomy & Astrophysics)The PHENIX experiment at RHIC has measured the invariant differential cross section for production of 
, 
, 
and 
mesons in collisions at = 200 GeV. The spectral shapes of all hadron transverse momentum distributions are well described by a Tsallis distribution functional form with only two parameters, 
and 
, determining the high 
and characterizing the low regions for the spectra, respectively. The integrated invariant cross sections calculated from the fitted distributions are found to be consistent with existing measurements and with statistical model predictions.
Murakami, Masanori*; Park, J. M.*; Giruzzi, G.*; Garcia, J.*; Bonoli, P.*; Budny, R. V.*; Doyle, E. J.*; Fukuyama, Atsushi*; Hayashi, Nobuhiko; Honda, Mitsuru; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03
