Identifying the transverse and longitudinal modes of the and mesons through their angular-dependent decay modes

Park, I. W.*; Sako, Hiroyuki; Aoki, Kazuya*; Gubler, P.; Lee, S. H.*

Physical Review D, 109(11), p.114042_1 - 114042_10, 2024/06

https://doi.org/10.1103/PhysRevD.109.114042

Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel

Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Harjo, S.; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*

Acta Materialia, 256, p.119139_1 - 119139_16, 2023/09

https://doi.org/10.1016/j.actamat.2023.119139

Transformation-induced plasticity (TRIP)-assisted steels exhibit an excellent combination of strength and ductility due to enhanced strain hardening rate associated with deformation-induced martensitic transformation (DIMT). Quantitative evaluation on the role of DIMT in strain hardening behavior of TRIP-assisted steels and alloys can provide guidance for designing advanced materials with strength and ductility synergy, which is, however, difficult since the phase composition keeps changing and both stress and plastic strain are dynamically partitioned among constituent phases during deformation. In the present study, tensile deformation with neutron diffraction measurement was performed on an Fe-24Ni-0.3C (wt.%) TRIP-assisted austenitic steel. The analysis method based on stress partitioning and phase fractions measured by neutron diffraction was proposed, by which the tensile flow stress and the strain hardening rate of the specimen were resolved into factors associated with each phase, i.e., the austenite matrix, deformation-induced martensite, and the transformation rate of DIMT after differentiation, and then the role of each factor in the global strain hardening behavior was discussed. In addition, the plastic strain partitioning between austenite and martensite was indirectly estimated using the dislocation density measured by diffraction profile analysis, which constructed the full picture of stress and strain partitioning between austenite and martensite in the material. The results suggested that both the transformation rate and the phase stress borne by the deformation-induced martensite played important roles in the global tensile properties of the material. The proposed decomposition analysis method could be widely applied to investigating mechanical behavior of multi-phase alloys exhibiting the TRIP phenomenon.

Multiple mechanisms in proton-induced nucleon removal at 100 MeV/nucleon

Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; Gmez-Ramos, M.*; Ogata, Kazuyuki*; Yoshida, Kazuki; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.

Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04

https://doi.org/10.1103/PhysRevLett.130.172501

We report on the first proton-induced single proton- and neutron-removal reactions from the neutron deficient O nucleus with large Fermi-surface asymmetry at 100 MeV/nucleon. Our results provide the first quantitative contributions of multiple reaction mechanisms including the quasifree knockout, inelastic scattering, and nucleon transfer processes. It is shown that the inelastic scattering and nucleon transfer, usually neglected at such energy regime, contribute about 50% and 30% to the loosely bound proton and deeply bound neutron removal, respectively.

Extended neutron orbital and the shell closure in Ca

Enciu, M.*; Liu, H. N.*; Obertelli, A.*; Doornenbal, P.*; Nowacki, F.*; Ogata, Kazuyuki*; Poves, A.*; Yoshida, Kazuki; Achouri, N. L.*; Baba, Hidetada*; et al.

Physical Review Letters, 129(26), p.262501_1 - 262501_7, 2022/12

https://doi.org/10.1103/PhysRevLett.129.262501

The one-neutron knockout from Ca was performed at 230 MeV/nucleon combined with prompt spectroscopy. The momentum distributions corresponding to the removal of and neutrons were measured. The cross sections are consistent with a shell closure at the neutron number , found as strong as at and in Ca isotopes from the same observables. The analysis of the momentum distributions leads to a difference of the root-mean-square radii of the neutron and orbitals of 0.61(23) fm, in agreement with the modified-shell-model prediction of 0.7 fm suggesting that the large root-mean-square radius of the orbital in neutron-rich Ca isotopes is responsible for the unexpected linear increase of the charge radius with the neutron number.

Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation

Mao, W.; Gao, S.*; Bai, Y.*; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*

Journal of Materials Research and Technology, 17, p.2690 - 2700, 2022/03

https://doi.org/10.1016/j.jmrt.2022.02.031

Metastable austenitic steels having ultrafine grained (UFG) microstructures can be fabricated by conventional cold rolling and annealing processes by utilizing the deformation-induced martensitic transformation during cold rolling and its reverse transformation to austenite upon annealing. However, such processes are not applicable when the austenite has high mechanical stability against deformation-induced martensitic transformation, since there is no sufficient amount of martensite formed during cold rolling. In the present study, a two-step cold rolling and annealing process was applied to an Fe-24Ni-0.3C metastable austenitic steel having high mechanical stability. Prior to the cold rolling, a repetitive subzero treatment and reverse annealing treatment were applied. Such a treatment dramatically decreased the mechanical stability of the austenite and greatly accelerated the formation of deformation-induced martensite during the following cold rolling processes. As a result, the grain refinement was significantly promoted, and a fully recrystallized specimen with a mean austenite grain size of 0.5 mm was successfully fabricated, which exhibited both high strength and high ductility.

Pairing forces govern population of doubly magic Ca from direct reactions

Browne, F.*; Chen, S.*; Doornenbal, P.*; Obertelli, A.*; Ogata, Kazuyuki*; Utsuno, Yutaka; Yoshida, Kazuki; Achouri, N. L.*; Baba, Hidetada*; Calvet, D.*; et al.

Physical Review Letters, 126(25), p.252501_1 - 252501_7, 2021/06

https://doi.org/10.1103/PhysRevLett.126.252501

Direct proton-knockout reactions of Sc were studied at the RIKEN Radioactive Isotope Beam Factory. Populated states of Ca were investigated through -ray and invariant-mass spectroscopy. Level energies were calculated from the nuclear shell model employing a phenomenological inter-nucleon interaction. Theoretical cross sections to states were calculated from distorted-wave impulse approximation estimates multiplied by the shell model spectroscopic factors. Despite the calculations showing a significant amplitude of excited neutron configurations in the ground-state of Sc, valence proton removals populated predominantly the ground-state of Ca. This counter-intuitive result is attributed to pairing effects leading to a dominance of the ground-state spectroscopic factor. Owing to the ubiquity of the pairing interaction, this argument should be generally applicable to direct knockout reactions from odd-even to even-even nuclei.

First spectroscopic study of Ar by the (,2) reaction

Juhsz, M. M.*; Elekes, Z.*; Sohler, D.*; Utsuno, Yutaka; Yoshida, Kazuki; Otsuka, Takaharu*; Ogata, Kazuyuki*; Doornenbal, P.*; Obertelli, A.*; Baba, Hidetada*; et al.

Physics Letters B, 814, p.136108_1 - 136108_8, 2021/03

AA2020-0747.pdf:0.83MB

https://doi.org/10.1016/j.physletb.2021.136108

The nuclear structure of Ar was studied by the (,2) reaction using -ray spectroscopy for the bound and unbound states. Comparing the results to our shell-model calculations, two bound and six unbound states were established. The low cross sections populating the two bound states of Ar could be interpreted as a clear signature for the presence of significant sub-shell closures at neutron numbers 32 and 34 in argon isotopes.

Shell evolution of = 40 isotones towards Ca; First spectroscopy of Ti

Corts, M. L.*; Rodriguez, W.*; Doornenbal, P.*; Obertelli, A.*; Holt, J. D.*; Lenzi, S. M.*; Menndez, J.*; Nowacki, F.*; Ogata, Kazuyuki*; Poves, A.*; et al.

Physics Letters B, 800, p.135071_1 - 135071_7, 2020/01

https://doi.org/10.1016/j.physletb.2019.135071

Excited states in the = 40 isotone Ti were populated via the V(,)Ti reaction at 200 MeV/nucleon at the Radioactive Isotope Beam Factory and studied using -ray spectroscopy. The energies of the and transitions, observed here for the first time, indicate a deformed Ti ground state. These energies are increased compared to the neighboring Cr and Fe isotones, suggesting a small decrease of quadrupole collectivity. The present measurement is well reproduced by large-scale shell-model calculations based on effective interactions, while ab initio and beyond mean-field calculations do not yet reproduce our findings.

neutron diffraction study on the deformation of a TRIP-assisted multi-phase steel composed of ferrite, austenite and martensite

Lavakumar, A.*; Park, M. H.*; Gao, S.*; Shibata, Akinobu*; Okitsu, Yoshitaka*; Gong, W.; Harjo, S.; Tsuji, Nobuhiro*

IOP Conference Series; Materials Science and Engineering, 580, p.012036_1 - 012036_6, 2019/09

https://doi.org/10.1088/1757-899X/580/1/012036

Nature of dynamic ferrite transformation revealed by neutron diffraction analysis during thermomechanical processing

Shibata, Akinobu*; Takeda, Yasunari*; Park, N.*; Zhao, L.*; Harjo, S.; Kawasaki, Takuro; Gong, W.*; Tsuji, Nobuhiro*

Scripta Materialia, 165, p.44 - 49, 2019/05

https://doi.org/10.1016/j.scriptamat.2019.02.017