Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Harjo, S.; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*
Acta Materialia, 256, p.119139_1 - 119139_16, 2023/09
Times Cited Count：42 Percentile：98.37(Materials Science, Multidisciplinary)Transformation-induced plasticity (TRIP)-assisted steels exhibit an excellent combination of strength and ductility due to enhanced strain hardening rate associated with deformation-induced martensitic transformation (DIMT). Quantitative evaluation on the role of DIMT in strain hardening behavior of TRIP-assisted steels and alloys can provide guidance for designing advanced materials with strength and ductility synergy, which is, however, difficult since the phase composition keeps changing and both stress and plastic strain are dynamically partitioned among constituent phases during deformation. In the present study, tensile deformation with 
neutron diffraction measurement was performed on an Fe-24Ni-0.3C (wt.%) TRIP-assisted austenitic steel. The analysis method based on stress partitioning and phase fractions measured by neutron diffraction was proposed, by which the tensile flow stress and the strain hardening rate of the specimen were resolved into factors associated with each phase, i.e., the austenite matrix, deformation-induced martensite, and the transformation rate of DIMT after differentiation, and then the role of each factor in the global strain hardening behavior was discussed. In addition, the plastic strain partitioning between austenite and martensite was indirectly estimated using the dislocation density measured by diffraction profile analysis, which constructed the full picture of stress and strain partitioning between austenite and martensite in the material. The results suggested that both the transformation rate and the phase stress borne by the deformation-induced martensite played important roles in the global tensile properties of the material. The proposed decomposition analysis method could be widely applied to investigating mechanical behavior of multi-phase alloys exhibiting the TRIP phenomenon.
Mao, W.; Gao, S.*; Bai, Y.*; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*
Journal of Materials Research and Technology, 17, p.2690 - 2700, 2022/03
Times Cited Count：20 Percentile：81.46(Materials Science, Multidisciplinary)Metastable austenitic steels having ultrafine grained (UFG) microstructures can be fabricated by conventional cold rolling and annealing processes by utilizing the deformation-induced martensitic transformation during cold rolling and its reverse transformation to austenite upon annealing. However, such processes are not applicable when the austenite has high mechanical stability against deformation-induced martensitic transformation, since there is no sufficient amount of martensite formed during cold rolling. In the present study, a two-step cold rolling and annealing process was applied to an Fe-24Ni-0.3C metastable austenitic steel having high mechanical stability. Prior to the cold rolling, a repetitive subzero treatment and reverse annealing treatment were applied. Such a treatment dramatically decreased the mechanical stability of the austenite and greatly accelerated the formation of deformation-induced martensite during the following cold rolling processes. As a result, the grain refinement was significantly promoted, and a fully recrystallized specimen with a mean austenite grain size of 0.5 mm was successfully fabricated, which exhibited both high strength and high ductility.
/Y
Fe
O
layers via longitudinal spin Seebeck effectLee, W.-Y.*; Park, N.-W.*; Kang, M.-S.*; Kim, G.-S.*; Jang, H. W.*; Saito, Eiji; Lee, S.-K.*
Journal of Physical Chemistry Letters (Internet), 11(13), p.5338 - 5344, 2020/07
Times Cited Count：12 Percentile：54.50(Chemistry, Physical)Kojima, Atsushi; Hanada, Masaya; Jeong, S. H.*; Bae, Y. S.*; Chang, D. H.*; Kim, T. S.*; Lee, K. W.*; Park, M.*; Jung, B. K.*; Mogaki, Kazuhiko; et al.
Fusion Engineering and Design, 102, p.81 - 87, 2016/01
Times Cited Count：6 Percentile：44.25(Nuclear Science & Technology)The long-pulse acceleration of the high-power positive ion beam has been demonstrated with the JT-60 positive ion source in the joint experiment among Japan Atomic Energy Agency (JAEA), Korea Atomic Energy Research Institute (KAERI) and National Fusion Research Institute (NFRI) under the collaboration program for the development of plasma heating and current drive systems. As a result of development of the operation techniques of the ion source and facilities of the neutral beam test stand in KAERI, 2 MW 100 s beam has been achieved for the first time. The achieved beam performance satisfies the JT-60SA requirement which is designed to be a 1.94 MW ion beam power from an ion source corresponding to total neutral beam power of 20 MW with 24 ion sources. Therefore, it was found that the JT-60 positive ion sources were applicable in the JT-60SA neutral beam injectors without further modification of the ion source and the accelerator. Moreover, because this ion source is planned to be a backup ion source for KSTAR, the operational region and characteristic has been clarified to apply to the KSTAR neutral beam injector.
Bierwage, A.; Yun, G. S.*; Choe, G. H.*; Nam, Y.*; Lee, W.*; Park, H. K.*; Bae, Y.-S.*
Nuclear Fusion, 55(1), p.013016_1 - 013016_17, 2015/01
Times Cited Count：4 Percentile：16.67(Physics, Fluids & Plasmas)Chatake, Toshiyuki*; Shibayama, Naoya*; Park, S. Y.*; Kurihara, Kazuo; Tamada, Taro; Tanaka, Ichiro*; Niimura, Nobuo*; Kuroki, Ryota; Morimoto, Yukio*
Journal of the American Chemical Society, 129(48), p.14840 - 14841, 2007/12
Times Cited Count：27 Percentile：61.09(Chemistry, Multidisciplinary)Park, H.; Yamano, Norihiro; Maruyama, Yu; Moriyama, Kiyofumi; Yang, Y.; Sugimoto, Jun
Dai-35-Kai Nihon Dennetsu Shimpojiumu Koen Rombunshu, 3, p.803 - 804, 1998/00
no abstracts in English
Park, H.; ; Moriyama, Kiyofumi; Maruyama, Yu; Y.Yang*; Sugimoto, Jun
Proc. of 11th Int. Heat Transfer Conf. (Heat Transfer 1998), 6, p.69 - 74, 1998/00
no abstracts in English
Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*
no journal, ,
Mao, W.; Gao, S.*; Gong, W.; Park, M. H.*; Bai, Y.*; Shibata, Akinobu*; Tsuji, Nobuhiro*
no journal, ,
