Hou, D.*; Qiu, Z.*; Barker, J.*; Sato, Koji*; Yamamoto, Kei; Vlez, S.*; Gomez-Perez, J. M.*; Hueso, L. E.*; Casanova, F.*; Saito, Eiji
Physical Review Letters, 118(14), p.147202_1 - 147202_6, 2017/04
Okumura, Yoshikazu; Gobin, R.*; Knaster, J.*; Heidinger, R.*; Ayala, J.-M.*; Bolzon, B.*; Cara, P.*; Chauvin, N.*; Chel, S.*; Gex, D.*; et al.
Review of Scientific Instruments, 87(2), p.02A739_1 - 02A739_3, 2016/02
IFMIF is an accelerator based neutron facility having two set of linear accelerators each producing 125mA/CW deuterium ion beams (250mA in total) at 40MeV. The LIPAc (Linear IFMIF Prototype Accelerator) being developed in the IFMIF-EVEDA project consists of an injector, a RFQ accelerator, and a part of superconducting Linac, whose target is to demonstrate 125mA/CW deuterium ion beam acceleration up to 9MeV. The injector has been developed in CEA Saclay and already demonstrated 140mA/100keV deuterium beam. The injector was disassembled and delivered to the International Fusion Energy Research Center (IFERC) in Rokkasho, Japan, and the commissioning has started after its reassembly 2014; the first beam production has been achieved in November 2014. Up to now, 100keV/120mA/CW hydrogen ion beam has been produced with a low beam emittance of 0.2 .mm.mrad (rms, normalized).
Okumura, Yoshikazu; Ayala, J.-M.*; Bolzon, B.*; Cara, P.*; Chauvin, N.*; Chel, S.*; Gex, D.*; Gobin, R.*; Harrault, F.*; Heidinger, R.*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.203 - 205, 2015/09
Under the framework of Broader Approach (BA) agreement between Japan and Euratom, IFMIF/EVEDA project was launched in 2007 to validate the key technologies to realize IFMIF. The most crucial technology to realize IFMIF is two set of linear accelerator each producing 125mA/CW deuterium ion beams up to 40MeV. The prototype accelerator, whose target is 125mA/CW deuterium ion beam acceleration up to 9MeV, is being developed in International Fusion Research Energy Center (IFERC) in Rokkasho, Japan. The injector developed in CEA Saclay was delivered in Rokkasho in 2014, and is under commissioning. Up to now, 100keV/120mA/CW hydrogen ion beams and 100keV/90mA/CW duty deuterium ion beams are successfully produced with a low beam emittance of 0.21 .mm.mrad (rms, normalized). Delivery of RFQ components will start in 2015, followed by the installation of RF power supplies in 2015.
Broggio, D.*; Bento, J.*; Caldeira, M.*; Cardenas-Mendez, E.*; Farah, J.*; Fonseca, T.*; Konvalinka, C.*; Liu, L.*; Perez, B.*; Capello, K.*; et al.
Radiation Measurements, 47(7), p.492 - 500, 2012/07
Stober, J.*; Lomas, P. J.*; Saibene, G.*; Andrew, Y.*; Belo, P.*; Conway, G. D.*; Herrmann, A.*; Horton, L. D.*; Kempenaars, M.*; Koslowski, H.-R.*; et al.
Nuclear Fusion, 45(11), p.1213 - 1223, 2005/11
no abstracts in English
Bcoulet, M.*; Huysmans, G.*; Sarazin, Y.*; Garbet, X.*; Ghendrih, P.*; Rimini, F.*; Joffrin, E.*; Litaudon, X.*; Monier-Garbet, P.*; An, J.-M.*; et al.
Plasma Physics and Controlled Fusion, 45(12A), p.A93 - A113, 2003/12
no abstracts in English
Faenov, A. Y.; Pikuz, T.*; Loupias, B.*; Perez, F.*; Benizzi-Mounaix, A.*; Rabec Le Gloahec, M.*; Koenig, M.*; Aglitskiy, Y.*; Falize, E.*; Courtois, C.*; et al.
no journal, ,
Kasugai, Atsushi; Bazin, N.*; Cara, P.*; Chel, S.*; Gex, D.*; Heidinger, R.*; Yoshida, Kiyoshi; Ihara, Akira; Knaster, J.*; Kondo, Keitaro; et al.
no journal, ,
The International Fusion Materials Irradiation Facility (IFMIF) aims to provide an accelerator-based, D-Li neutron source to produce high energy neutrons at sufficient intensity and irradiation volume for DEMO reactor materials qualification. The IFMIF/EVEDA project, which is part of the Broader Approach (BA) agreement between Japan and EU, has the mission to work on the engineering design of IFMIF and to validate the main technological challenges. The prototype accelerator being developed in the IFMIF-EVEDA project consists of an injector, a RFQ accelerator, and a part of superconducting Linac. The design of the cryoplant for SRF-linac has been already completed and it will be started to install to the facility from coming September after the licensing. This article describes the cryoplant for the IFMIF/EVEDA prototype accelerator facility.