Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Baccou, J.*; Glantz, T.*; Ghione, A.*; Sargentini, L.*; Fillion, P.*; Damblin, G.*; Sueur, R.*; Iooss, B.*; Fang, J.*; Liu, J.*; et al.
Nuclear Engineering and Design, 421, p.113035_1 - 113035_16, 2024/05
Namie, Masanari; Saito, Junichi
Computational Materials Science, 239, p.112963_1 - 112963_7, 2024/04
Saito, Shigeru; Meigo, Shinichiro; Makimura, Shunsuke*; Hirano, Yukinori*; Tsutsumi, Kazuyoshi*; Maekawa, Fujio
JAEA-Technology 2023-025, 48 Pages, 2024/03
JAEA has been developing Accelerator-Driven Systems (ADS) for research and development of nuclear transmutation using accelerators in order to reduce the volume and hazardousness of high-level radioactive waste generated by nuclear power plants. In order to prepare the material irradiation database necessary for the design of ADS and to study the irradiation effects in Lead-Bismuth Eutectic (LBE) alloys, a proton irradiation facility is under consideration at J-PARC. In this proton irradiation facility, 250 kW proton beams will be injected into the LBE spallation target, and irradiation tests under LBE flow will be performed for candidate structural materials for ADS. Furthermore, semiconductor soft-error tests, medical RI production, and proton beam applications will be performed. Among these, Post Irradiation Examination (PIE) of irradiated samples and RI separation and purification will be carried out in the PIE facility to be constructed near the proton irradiation facility. In this PIE facility, PIE of the equipment and samples irradiated in other facilities in J-PARC will also be performed. This report describes the conceptual study of the PIE facility, including the items to be tested, the test flow, the facilities, the test equipment, etc., and the proposed layout of the facility.
Togawa, Orihiko; Hokama, Tomonori; Hiraoka, Hirokazu; Saito, Shota
JAEA-Research 2023-011, 78 Pages, 2024/03
When radionuclides are released into the atmospheric environment at a nuclear emergency, protective measures such as evacuation and temporal relocation are carried out using motor vehicles such as private cars and buses to reduce radiation exposure to residents. To confirm conditions of contamination for the evacuated/relocated residents and the used motor vehicles, contamination inspection is conducted in the middle of the route from border areas of Nuclear Emergency Planning Zone to evacuation shelters. In the present inspection in Japan, a value of OIL4 = 40,000 cpm is used as decontamination criteria. For the details and derivation methods of the value, however, no official documents are found which give systematically detailed descriptions and explanation. It is also recognized that even few experts on nuclear emergencies can explain these subjects in detail as a whole. In order to explain scientifically and technically the OIL4 value of decontamination criteria used in contamination inspection in Japan, this report aims at investigating and estimating the deviation methods of OIL4, and examining and considering these results. To achieve the objectives, we show the bases for decontamination criteria, and investigate and estimate the derivation methods for limits of a surface contamination density corresponding to the generic criteria for each exposure pathway. Moreover, we give the OIL4 value some consideration and suggestions from a viewpoint of positioning and feature of OIL4 in Japan, and cautionary points at revising the value.
Saito, Yuki*; Ishiwata, Tobimaru*; Horiuchi, Misato*; Nishiki, Yuto*; Kikuchi, Ryosuke*; Otake, Tsubasa*; Kawakita, Ryohei; Takayama, Yusuke; Mitsui, Seiichiro; Sato, Tsutomu*
2024 Nendo Shigen, Sozai Gakkai Shunki Taikai Koenshu, 7 Pages, 2024/03
no abstracts in English
Mizuno, Rurie*; Niikura, Megumi*; Saito, Takeshi*; Matsuzaki, Teiichiro*; Sakurai, Hiroyoshi*; Amato, A.*; Asari, Shunsuke*; Biswas, S.*; Chiu, I.-H. ; Gianluca, J.*; et al.
Nuclear Instruments and Methods in Physics Research A, 1060, p.169029_1 - 169029_14, 2024/03
Times Cited Count:0 Percentile:0.02(Instruments & Instrumentation)Amekura, Hiroshi*; Chettah, A.*; Narumi, Kazumasa*; Chiba, Atsuya*; Hirano, Yoshimi*; Yamada, Keisuke*; Yamamoto, Shunya*; Leino, A. A.*; Djurabekova, F.*; Nordlund, K.*; et al.
Nature Communications (Internet), 15, p.1786_1 - 1786_10, 2024/02
Injecting high-energy heavy ions in the electronic stopping regime into solids can create cylindrical damage zones called latent ion tracks. Although these tracks form in many materials, none have ever been observed in diamond, even when irradiated with high-energy GeV uranium ions. Here we report the first observation of ion track formation in diamond irradiated with 2-9 MeV C fullerene ions. Depending on the ion energy, the mean track length (diameter) changed from 17 (3.2) nm to 52 (7.1) nm. High resolution scanning transmission electron microscopy (HR-STEM) indicated the amorphization in the tracks, in which -bonding signal from graphite was detected by the electron energy loss spectroscopy (EELS).
Ikeda, Kazutaka*; Sashida, Sho*; Otomo, Toshiya*; Oshita, Hidetoshi*; Honda, Takashi*; Hawai, Takafumi*; Saito, Hiraku*; Ito, Shinichi*; Yokoo, Tetsuya*; Sakaki, Koji*; et al.
International Journal of Hydrogen Energy, 51(Part A), p.79 - 87, 2024/01
Times Cited Count:0 Percentile:0.01(Chemistry, Physical)Ninomiya, Kazuhiko*; Kubo, Kenya*; Inagaki, Makoto*; Yoshida, Go*; Chiu, I.-H. ; Kudo, Takuto*; Asari, Shunsuke*; Sentoku, Sawako*; Takeshita, Soshi*; Shimomura, Koichiro*; et al.
Scientific Reports (Internet), 14, p.1797_1 - 1797_8, 2024/01
Times Cited Count:0The amount of C in steel, which is critical in determining its properties, is strongly influenced by steel production technology. We propose a novel method of quantifying the bulk C content in steel non-destructively using muons. This revolutionary method may be used not only in the quality control of steel in production, but also in analyzing precious steel archaeological artifacts. A negatively charged muon forms an atomic system owing to its negative charge, and is finally absorbed into the nucleus or decays to an electron. The lifetimes of muons differ significantly, depending on whether they are trapped by Fe or C atoms, and identifying the elemental content at the muon stoppage position is possible via muon lifetime measurements. The relationship between the muon capture probabilities of C/Fe and the elemental content of C exhibits a good linearity, and the C content in the steel may be quantitatively determined via muon lifetime measurements. Furthermore, by controlling the incident energies of the muons, they may be stopped in each layer of a stacked sample consisting of three types of steel plates with thicknesses of 0.5 mm, and we successfully determined the C contents in the range 0.20 - 1.03 wt% depth-selectively, without sample destruction.
Katabuchi, Tatsuya*; Sato, Yaoki*; Takebe, Karin*; Igashira, Masayuki*; Umezawa, Seigo*; Fujioka, Ryo*; Saito, Tatsuhiro*; Iwamoto, Nobuyuki
Journal of Nuclear Science and Technology, 6 Pages, 2024/00
Times Cited Count:0 Percentile:0.18(Nuclear Science & Technology)Saito, Takumi*; Nishi, Shusaku*; Amano, Yuki; Beppu, Hikari*; Miyakawa, Kazuya
ACS ES&T Water (Internet), 3(12), p.4103 - 4112, 2023/12
Huang, M.*; Kinjo, Tetsuya*; Yasumura, Shunsaku*; Toyao, Takashi*; Matsumura, Daiju; Saito, Hiroyuki*; Shimizu, Kenichi*; Namiki, Norikazu*; Maeno, Zen*
Catalysis Science & Technology, 13(23), p.6832 - 6838, 2023/12
Times Cited Count:0 Percentile:0(Chemistry, Physical)Fujiwara, Hidenori*; Nakatani, Yasuhiro*; Aratani, Hidekazu*; Kanai-Nakata, Yuina*; Yamagami, Kohei*; Hamamoto, Satoru*; Kiss, Takayuki*; Sekiyama, Akira*; Tanaka, Arata*; Ebihara, Takao*; et al.
New Physics; Sae Mulli, 73(12), p.1062 - 1066, 2023/12
Kim, M.; Malins, A.*; Machida, Masahiko; Yoshimura, Kazuya; Saito, Kimiaki; Yoshida, Hiroko*
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 22(4), p.156 - 169, 2023/11
Dose reduction factor of a Japanese house is important information in the external exposure estimation of returning residents. In 2019, a total of 19 wooden houses were surveyed in Iitate Village and Namie Town using a gamma plotter that can continuously measure the air dose rate. In addition, the characteristics of the reduction factor were investigated from the measured air dose rate. In the vicinity of houses, uncontaminated areas exist underneath houses and, the ratio of paved surfaces such as asphalt roads is relatively high; furthermore, the pavement has a tendency for the radiation source to decay quickly. Therefore, the air dose rate near the house showed a relatively low value in common at all sites. Air dose rates above unpaved surfaces showed higher values and larger variations than those above paved surfaces within a radius of 50 m form the center of a house. The reduction factor was widely distributed even for one house, if the ratio of every air dose rate observed inside and outside the house is considered. It is suggested that a realistic reduction factor may not be obtained when the reduction factor is obtained based on the measured values at a small number of points that do not have the representativeness of the radiation field to be measured.
Kurita, Keisuke; Iikura, Hiroshi; Tsuchikawa, Yusuke; Kai, Tetsuya; Shinohara, Takenao; Odaira, Naoya*; Ito, Daisuke*; Saito, Yasushi*; Matsubayashi, Masahito
Journal of Physics; Conference Series, 2605, p.012005_1 - 012005_6, 2023/10
The Japan Research Ractor-3 (JRR-3) is operation resumed on February 26, 2021, and the shared use was also restarted in July, 2021. With the resumption of JRR-3 operation, two imaging facilities called TNRF and CNRF have also resumed their utilization. In this presentation, we report the details of these two neutron facilities.
Ito, Daisuke*; Odaira, Naoya*; Ito, Kei*; Saito, Yasushi*; Kurita, Keisuke; Iikura, Hiroshi
Journal of Physics; Conference Series, 2605, p.012024_1 - 012024_6, 2023/10
Gas-liquid two-phase flow appears in many heat-exchanging devices. To understand the phenomena in such devices, the two-phase flow dynamics should be clarified. In this study, high-speed neutron imaging is applied to the measurements of two-phase flow dynamics, and the accuracy of the void fraction measurement is investigated.
Saito, Yasushi*; Ito, Daisuke*; Odaira, Naoya*; Kurita, Keisuke; Iikura, Hiroshi
Journal of Physics; Conference Series, 2605, p.012028_1 - 012028_6, 2023/10
To observe flow velocity distributions by Neutron Imaging, suitable tracer is necessary. The requirements are its density, its visibility, and its wettability (if applied to liquid metal). Gold cadmium tracers have been developed for the Pb-Bi two-phase flow, however, the visibility have not been verified depending on the particle size and the measurement system. As the candidates of tracer particles, Ag, Cd, Au-Cd, and Ag-Cd have been tested by varying its compositions and its diameters. Results show enough visibility if the particles size is larger than 1mm. In addition, Cd tracer particles were applied to the fluidized bed, where the bed materials are metallic particle made of stainless steel, with 1mm diameter. The diameter of Cd trace is about 1.5 mm. From the neutron imaging, the visibility of the tracers is enough to measure the velocity distributions in the fluidized bed.
Fujiwara, Hidenori*; Nakatani, Yasuhiro*; Aratani, Hidekazu*; Kanai, Yuina*; Yamagami, Kohei*; Hamamoto, Satoru*; Kiss, Takayuki*; Yamasaki, Atsushi*; Higashiya, Atsushi*; Imada, Shin*; et al.
Physical Review B, 108(16), p.165121_1 - 165121_10, 2023/10
Times Cited Count:0 Percentile:0(Materials Science, Multidisciplinary)Saito, Junichi; Monbernier, M.*
Surfaces and Interfaces (Internet), 41, p.103248_1 - 103248_8, 2023/10
Times Cited Count:0 Percentile:0.01(Chemistry, Physical)Kondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
Times Cited Count:5 Percentile:92.64(Multidisciplinary Sciences)no abstracts in English