A Novel kinetic model for dissolution and precipitation of oxide on stainless-steel surface in stagnant liquid sodium

Kawaguchi, Munemichi*; Ikeda, Asuka; Saito, Junichi

Annals of Nuclear Energy, 226, p.111880_1 - 111880_9, 2026/02

https://doi.org/10.1016/j.anucene.2025.111880

Solidification/stabilization of low-level radioactive wastes including hazardous substances from uranium fuel processing plants

Sato, Junya; Takahashi, Yuta; Sunahara, Jun*; Saito, Toshimitsu*; Yoshida, Yukihiko; Sone, Tomoyuki; Osugi, Takeshi

Progress in Nuclear Science and Technology (Internet), 8, p.307 - 312, 2025/09

https://doi.org/10.15669/pnst.8.307

Electronic approach to understand the wettability of surface treated titanium with liquid sodium

Namie, Masanari; Saito, Junichi; Oka, Ryotaro*; Kim, J.-H.*

Vacuum, 234, p.114038_1 - 114038_9, 2025/04

https://doi.org/10.1016/j.vacuum.2025.114038

Applicability of fluorine gas surface treatment to control liquid sodium wettability

Namie, Masanari; Saito, Junichi; Ikeda, Asuka; Oka, Ryotaro*; Kim, J.-H.*

Surfaces (Internet), 7(3), p.550 - 559, 2024/09

https://doi.org/10.3390/surfaces7030037

Impact of the ground-state 4 symmetry for anisotropic hybridization in the heavy-fermion superconductor CeNiGe

Fujiwara, Hidenori*; Nakatani, Yasuhiro*; Aratani, Hidekazu*; Kanai-Nakata, Yuina*; Yamagami, Kohei*; Hamamoto, Satoru*; Kiss, Takayuki*; Yamasaki, Atsushi*; Higashiya, Atsushi*; Imada, Shin*; et al.

Physical Review B, 108(16), p.165121_1 - 165121_10, 2023/10

https://doi.org/10.1103/PhysRevB.108.165121

First observation of O

Kondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.

Nature, 620(7976), p.965 - 970, 2023/08

https://doi.org/10.1038/s41586-023-06352-6

no abstracts in English

Hydrogen occupation and hydrogen-induced volume expansion in FeNiD at high conditions

Shito, Chikara*; Kagi, Hiroyuki*; Kakizawa, Sho*; Aoki, Katsutoshi*; Komatsu, Kazuki*; Iizuka, Riko*; Abe, Jun*; Saito, Hiroyuki*; Sano, Asami; Hattori, Takanori

American Mineralogist, 108(4), p.659 - 666, 2023/04

https://doi.org/10.2138/am-2022-8348

The phase relation and crystal structure of FeNiH (D) at high pressures and temperatures up to 12 GPa and 1000 K were clarified by in-situ X-ray and neutron diffraction measurements. Under conditions of the present study, no deuterium atoms occupied tetragonal () sites of face-centered cubic (fcc) FeNiD unlike fcc FeH(D). The deuterium-induced volume expansion per deuterium was determined as 2.45(4) and 3.31(6) for fcc and hcp phases, respectively, which were significantly larger than the corresponding values for FeD. The value slightly increased with increasing temperature. This study suggests that only 10% of nickel in iron drastically changes the behaviors of hydrogen in metal. Assuming that is constant regardless of pressure, the maximum hydrogen content in the Earth's inner core is estimated to be one to two times the amount of hydrogen in the oceans.

The Muon linac project at J-PARC

Kondo, Yasuhiro; Kitamura, Ryo; Fuwa, Yasuhiro; Morishita, Takatoshi; Moriya, Katsuhiro; Takayanagi, Tomohiro; Otani, Masashi*; Cicek, E.*; Ego, Hiroyasu*; Fukao, Yoshinori*; et al.

Proceedings of 31st International Linear Accelerator Conference (LINAC 2022) (Internet), p.636 - 641, 2022/09

https://doi.org/10.18429/JACoW-LINAC2022-WE1AA05

The muon linac project for the precise measurement of the muon anomalous magnetic and electric dipole moments, which is currently one of the hottest issues of the elementary particle physics, is in progress at J-PARC. The muons from the J-PARC muon facility are once cooled to room temperature, then accelerated up to 212 MeV with a normalized emittance of 1.5 mm mrad and a momentum spread of 0.1%. Four types of accelerating structures are adopted to obtain the efficient acceleration with a wide beta range from 0.01 to 0.94. The project is moving into the construction phase. We already demonstrated the re-acceleration scheme of the decelerated muons using a 324-MHz RFQ in 2017. The high-power test of the 324-MHz Interdigital H-mode (IH) DTL using a prototype cavity was performed in 2021. The fabrication of the first module of 14 modules of the 1296-MHz Disk and Washer (DAW) CCL will be done to confirm the production process. Moreover, the final design of the travelling wave accelerating structure for the high beta region is also proceeding. In this paper, the recent progress toward the realization of the world first muon linac will be presented.

The Damage analysis for irradiation tolerant spin-driven thermoelectric device based on single-crystalline YFeO/Pt heterostructures

Ieda, Junichi; Okayasu, Satoru; Harii, Kazuya*; Kobata, Masaaki; Yoshii, Kenji; Fukuda, Tatsuo; Ishida, Masahiko*; Saito, Eiji

IEEE Transactions on Magnetics, 58(8), p.1301106_1 - 1301106_6, 2022/08

BB2021-0945.pdf:1.19MB

https://doi.org/10.1109/TMAG.2022.3145888

The combination of spin-driven thermoelectric (STE) devices based on spin Seebeck effect (SSE), and radioactive isotopes as heat sources, has potential as a next-generation method of power generation in applications such as power supplies for space probes. However, there has been very limited knowledge available indicating the irradiation tolerance of spin thermoelectric devices. Through analysis using a heavy ion-beam accelerator and the hard X-ray photoemission spectroscopy (HAXPES) measurements, we show that a prototypical STE device based on YFeO/Pt heterostructures has tolerance to irradiation of high-energy heavy-ion beams. We used 320 MeV gold ion beams modeling cumulative damages due to fission products emitted from the surface of spent nuclear fuels. By varying the dose level, we confirmed that the thermoelectric and magnetic properties of the SSE elements are not affected by the ion-irradiation dose up to ions/cm fluence and that the SSE signal is extinguished around ions/cm, in which the ion tracks almost fully cover the sample surface. In addition, the HAXPES measurements were performed to understand the effects at the interface of YFeO/Pt. The HAXPES measurements suggest that the chemical reaction that diminishes the SSE signals is enhanced with the increase of the irradiation dose. We share the current understandings of the damage analysis in YFeO/Pt for developing better STE devices applicable to harsh environmental usages.

Fabrication and low-power test of disk-and-washer cavity for muon acceleration

Takeuchi, Yusuke*; Tojo, Junji*; Nakazawa, Yuga*; Kondo, Yasuhiro; Kitamura, Ryo; Morishita, Takatoshi; Cicek, E.*; Ego, Hiroyasu*; Futatsukawa, Kenta*; Kawamura, Naritoshi*; et al.

Proceedings of 13th International Particle Accelerator Conference (IPAC 22) (Internet), p.1534 - 1537, 2022/06

https://doi.org/doi:10.18429/JACoW-IPAC2022-TUPOMS046

The muon g-2/EDM experiment is under preparation at Japan Proton Accelerator Research Complex (J-PARC), and the muon linear accelerator for the experiment is being developed. A Disk-and-Washer (DAW) cavity will be used for the medium-velocity part of the accelerator, and muons will be accelerated from = = 0.3 to 0.7 with the operating frequency of 1.296 GHz. Machining, brazing, and low-power measurements of a prototype cell reflecting the design of the first tank of DAW were performed to identify fabrication problems. Several problems were identified, such as misalignment of washers during brazing, and some measures will be taken in the actual tank fabrication. In this paper, the results of the prototype cell fabrication will be reported.