New precise measurements of muonium hyperfine structure at J-PARC MUSE

Strasser, P.*; Abe, Mitsushi*; Aoki, Masaharu*; Choi, S.*; Fukao, Yoshinori*; Higashi, Yoshitaka*; Higuchi, Takashi*; Iinuma, Hiromi*; Ikedo, Yutaka*; Ishida, Katsuhiko*; et al.

EPJ Web of Conferences, 198, p.00003_1 - 00003_8, 2019/01

https://doi.org/10.1051/epjconf/201919800003

Evaluation of bending strain in NbSn strands of CIC conductor using neutron diffraction

Hemmi, Tsutomu*; Harjo, S.; Kajitani, Hideki*; Suwa, Tomone*; Saito, Toru*; Aizawa, Kazuya; Osamura, Kozo*; Koizumi, Norikiyo*

IEEE Transactions on Applied Superconductivity, 27(4), p.4200905_1 - 4200905_5, 2017/06

https://doi.org/10.1109/TASC.2017.2660064

Measurements and evaluations of air dose rates around the Fukushima NPP site, 6; Status and issues on evaluation of individual doses due to external exposures

Saito, Kimiaki; Kurihara, Osamu*; Matsuda, Norihiro; Takahara, Shogo; Sato, Tetsuro*

Radioisotopes, 65(2), p.93 - 112, 2016/02

https://doi.org/10.3769/radioisotopes.65.93

Late information is introduced on dose evaluation due to external exposures which employ an important role in the exposures due to the Fukushima accident. First, merits and demerits of the currently used two methods, that is the estimation based air dose rates and the measurements using personal dosimeters, are discussed indicating some basic data after a fundamental concept of external dose evaluation is provided. Next, main activities are summarized on external dose measurements and evaluations after the accident. Finally, a new trial on dose evaluation in introduced.

Research on engineering technology in the full-scale demonstration of EBS and operation technology for HLW disposal; Research report in 2013 (Joint research)

Fujita, Tomoo; Tanai, Kenji; Nakayama, Masashi; Sawada, Sumiyuki*; Asano, Hidekazu*; Saito, Masahiko*; Yoshino, Osamu*; Kobayashi, Masato*

JAEA-Research 2014-031, 44 Pages, 2015/03

JAEA-Research-2014-031.pdf:16.11MB

Japan Atomic Energy Agency (JAEA) and Radioactive Waste Management Funding and Research Center (RWMC) concluded the letter of cooperation agreement on the research and development of radioactive waste disposal in April, 2005, and have been carrying out the collaboration work based on the agreement. JAEA have been carrying out the Horonobe Underground Research Laboratory (URL) Project which is intended for a sedimentary rock in the Horonobe town, Hokkaido, since 2001. In the project, geoscientific research and research and development on geological disposal technology are being promoted. Meanwhile, the government (the Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry) has been promoting construction of equipments for the full-scale demonstration of engineered barrier system (EBS) and operation technology for high-level radioactive waste (HLW) disposal since 2008, to enhance public's understanding to the geological disposal of HLW, e.g. using underground facility. RWMC received an order of the project in fiscal year 2012 (2011/2012) continuing since fiscal year 2008 (2008/2009). Since topics in this project are included in the Horonobe URL Project, JAEA carried out this project as collaboration work continuing since fiscal year 2008. This report summarizes the results of engineering technology carried out in this collaboration work in fiscal year 2013. In fiscal year 2013, emplacement tests using buffer material block for the vertical emplacement concept were carried out and visualization tests for water penetration in buffer material were carried out.

Research on engineering technology in the full-scale demonstration of EBS and operation technology for HLW disposal; Research report in 2012 (Joint research)

Nakatsuka, Noboru; Sato, Haruo; Tanai, Kenji; Nakayama, Masashi; Sawada, Sumiyuki*; Asano, Hidekazu*; Saito, Masahiko*; Yoshino, Osamu*; Tsukahara, Shigeki*; Hishioka, Sosuke*; et al.

JAEA-Research 2013-034, 70 Pages, 2014/01

JAEA-Research-2013-034.pdf:9.11MB

Japan Atomic Energy Agency (JAEA) and Radioactive Waste Management Funding and Research Center (RWMC) concluded the letter of cooperation agreement on the research and development of radioactive waste disposal in April, 2005, and have been carrying out the collaboration work based on the agreement. JAEA have been carrying out the Horonobe Underground Research Laboratory (URL) Project which is intended for a sedimentary rock in the Horonobe town, Hokkaido, since 2001. In the project, geoscientific research and research and development on geological disposal technology are being promoted. Meanwhile, the government (the Agency for Natural Resources and Energy, Ministry of Economy, Trade and Industry) has been promoting construction of equipments for the full-scale demonstration of engineered barrier system and operation technology for high-level radioactive waste (HLW) disposal since 2008, to enhance public's understanding to the geological disposal of HLW, e.g. using underground facility. RWMC received an order of the project in fiscal year 2012 (2011/2012) continuing since fiscal year 2008 (2008/2009). Since topics in this project are included in the Horonobe URL Project, JAEA carried out this project as collaboration work continuing in fiscal year 2008. This report summarizes the results of engineering technology carried out in this collaboration work in fiscal year 2012. In fiscal year 2012, part of the equipments for emplacement of buffer material was produced and visualization test for water penetration in buffer material were carried out.

Effect of specimen shape on the elongation of 316LN jacket used in the ITER toroidal field coil

Hamada, Kazuya; Kawano, Katsumi; Saito, Toru; Iguchi, Masahide; Nakajima, Hideo; Teshima, Osamu*; Matsuda, Hidemitsu*

AIP Conference Proceedings 1435, p.55 - 62, 2012/06

https://doi.org/10.1063/1.4712080

The TF coil conductor was composed of 900 NbSn superconducting strands and 522 Cu strands protected by circular sheath tube (jacket) with the outer diameter of 43.7 mm. The jacket section is a seamless tube made of modified 316LN. JAEA tested different types of tensile specimen (Japanese Industrial Standards (JIS) type and ASTM type) cut from jacket. ASTM type specimen has longer and wider reduced section than those of JIS type specimen. Elongation of as received condition is not dependent on specimen shape. But after cold work and aging, the elongation is deteriorated due to a sensitization and scattering of elongation is larger than that of as received condition. Fracture mode of aged jacket is "cup and cone fracture", which have a mixture of inter granular at center area and trans-granular factures in circumference area. It is considered that initiation of fracture is more sensitive on test specimen shape with low ductility.

JAEA thermodynamic database for performance assessment of geological disposal of high-level and TRU wastes; Selection of thermodynamic data of molybdenum

Kitamura, Akira; Kirishima, Akira*; Saito, Takumi*; Shibutani, Sanae*; Tochiyama, Osamu*

JAEA-Review 2010-010, 75 Pages, 2010/06

JAEA-Review-2010-010.pdf:1.27MB

Within the scope of the JAEA thermodynamic database project for performance assessment of geological disposal of high-level radioactive and TRU wastes, the selection of the thermodynamic data on the inorganic compounds and complexes of molybdenum were carried out. We focused to select thermodynamic data of aquous species and compounds which could form under repository conditions for the disposal of radioactive wastes, i.e. relatively low concentration of molybdenum and from near neutral through alkaline conditions. Selection of thermodynamic data was based on the guidelines by the Nuclear Energy Agency in the Organisation for Economic Co-operation and Development (OECD/NEA). Extensive literature survey was performed and all the obtained articles have been carefully reviewed to select the thermodynamic data for molybdenum. Thermodynamic data at 25 C and zero ionic strength were determined from accepted thermodynamic data which were considered to be reliable. We especially paid attention to select formation constant of molybdate ion with hydrogen ion.

Improvements of the charge exchange system at the 3GeV RCS in J-PARC

Yoshimoto, Masahiro; Takeda, Osamu; Kawase, Masato; Yamazaki, Yoshio; Kinsho, Michikazu; Saito, Yoshio*; Kabeya, Zenzaburo*

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.3930 - 3932, 2010/05

http://accelconf.web.cern.ch/AccelConf/IPAC10/papers/thpeb021.pdf

At the 3 GeV RCS (Rapid Cycling Synchrotron) in J-PARC (Japan Proton Accelerator Research Complex), the scheme of H charge exchange injection using stripping foils is adopted. The charge exchange system is composed of three stripping foil devices. The first stripping foil device, which converts the H beam from the 181 MeV LINAC into the H beam, can replace the broken foil with new one in vacuum remotely and automatically. In September 2007, mechanical trouble with the first stripping foil device had occurred just before the RCS beam commissioning was started. The magnetic coupling of the transfer rod had been decoupled and the transfer rod had been broken which was caught in the vacuum gate valve. We studied the trouble cause, re-examined the structural design and the selection for the material, and then verified the specification from endurance tests with sample pieces. Then the improved device was installed in the ring in September 2008.

The H-Invitational Database (H-InvDB); A Comprehensive annotation resource for human genes and transcripts

Yamasaki, Chisato*; Murakami, Katsuhiko*; Fujii, Yasuyuki*; Sato, Yoshiharu*; Harada, Erimi*; Takeda, Junichi*; Taniya, Takayuki*; Sakate, Ryuichi*; Kikugawa, Shingo*; Shimada, Makoto*; et al.

Nucleic Acids Research, 36(Database), p.D793 - D799, 2008/01

https://doi.org/10.1093/nar/gkm999

Here we report the new features and improvements in our latest release of the H-Invitational Database, a comprehensive annotation resource for human genes and transcripts. H-InvDB, originally developed as an integrated database of the human transcriptome based on extensive annotation of large sets of fulllength cDNA (FLcDNA) clones, now provides annotation for 120 558 human mRNAs extracted from the International Nucleotide Sequence Databases (INSD), in addition to 54 978 human FLcDNAs, in the latest release H-InvDB. We mapped those human transcripts onto the human genome sequences (NCBI build 36.1) and determined 34 699 human gene clusters, which could define 34 057 protein-coding and 642 non-protein-coding loci; 858 transcribed loci overlapped with predicted pseudogenes.

Extended steady-state and high-beta regimes of net-current free heliotron plasmas in the large helical device

Motojima, Osamu*; Yamada, Hiroshi*; Komori, Akio*; Oyabu, Nobuyoshi*; Kaneko, Osamu*; Kawahata, Kazuo*; Mito, Toshiyuki*; Muto, Takashi*; Ida, Katsumi*; Imagawa, Shinsaku*; et al.

Proceedings of 21st IAEA Fusion Energy Conference (FEC 2006) (CD-ROM), 12 Pages, 2007/03

http://www-naweb.iaea.org/napc/physics/FEC/FEC2006/html/node31.htm#5947

The performance of net-current free Heliotron plasmas has been developed by findings of innovative operational scenarios in conjunction with an upgrade of the heating power and the pumping/fueling capability in the Large Helical Device (LHD). Consequently, the operational regime has been extended, in particular, with regard to high density, long pulse length and high beta. Diversified studies in LHD have elucidated the advantages of net-current free heliotron plasmas. In particular, an Internal Diffusion Barrier (IDB) by combination of efficient pumping of the local island divertor function and core fueling by pellet injection has realized a super dense core as high as 510m, which stimulates an attractive super dense core reactor. Achievements of a volume averaged beta of 4.5 % and a discharge duration of 54-min. with a total input energy of 1.6 GJ (490 kW in average) are also highlighted. The progress of LHD experiments in these two years is overviewed with highlighting IDB, high and long pulse.