Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ukai, Shigeharu; Sakamoto, Kan*; Otsuka, Satoshi; Yamashita, Shinichiro; Kimura, Akihiko*
Journal of Nuclear Materials, 583, p.154508_1 - 154508_24, 2023/09
Times Cited Count：6 Percentile：91.18(Materials Science, Multidisciplinary)
scattering length from 
photoproduction on the proton near the reaction thresholdIshikawa, Takatsugu*; Fujimura, Hisako*; Fukasawa, Hiroshi*; Hashimoto, Ryo*; He, Q.*; Honda, Yuki*; Hosaka, Atsushi; Iwata, Takahiro*; Kaida, Shun*; Kasagi, Jirota*; et al.
Physical Review C, 101(5), p.052201_1 - 052201_6, 2020/05
Times Cited Count：4 Percentile：44.35(Physics, Nuclear)Yamashita, Shinichiro; Ioka, Ikuo; Nemoto, Yoshiyuki; Kawanishi, Tomohiro; Kurata, Masaki; Kaji, Yoshiyuki; Fukahori, Tokio; Nozawa, Takashi*; Sato, Daiki*; Murakami, Nozomu*; et al.
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.206 - 216, 2019/09
After the nuclear accident at Fukushima Daiichi Power Plant, research and development (R&D) program for establishing technical basis of accident-tolerant fuel (ATF) started from 2015 in Japan. Since then, both experimental and analytical studies necessary for designing a new light water reactor (LWR) core with ATF candidate materials are being conducted within the Japanese ATF R&D Consortium for implementing ATF to the existing LWRs, accompanying with various technological developments required. Until now, we have accumulated experimental data of the candidate materials by out-of-pile tests, developed fuel evaluation codes to apply to the ATF candidate materials, and evaluated fuel behavior simulating operational and accidental conditions by the developed codes. In this paper, the R&D progresses of the ATF candidate materials considered in Japan are reviewed based on the information available such as proceedings of international conference and academic papers, providing an overview of ATF program in Japan.
Watanabe, Tamaki*; Toyama, Takeshi*; Hanamura, Kotoku*; Imao, Hiroshi*; Kamigaito, Osamu*; Kamoshida, Atsushi*; Kawachi, Toshihiko*; Koyama, Ryo*; Sakamoto, Naruhiko*; Fukunishi, Nobuhisa*; et al.
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1105 - 1108, 2019/07
Upgrades for the RIKEN heavy-ion linac (RILAC) involving a new superconducting linac (SRILAC) are currently underway at the RIKEN radioactive isotope beam factory (RIBF). It is crucially important to develop nondestructive beam measurement diagnostics. We have developed a beam energy position monitor (BEPM) system which can measure not only the beam position but also the beam energy simultaneously by measuring the time of flight of the beam. We fabricated 11 BEPMs and completed the position calibration to obtain the sensitivity and offset for each BEPMs. The position accuracy has been achieved to be less than 
0.1 mm by using the mapping measurement.
Watanabe, Tamaki*; Imao, Hiroshi*; Kamigaito, Osamu*; Sakamoto, Naruhiko*; Fukunishi, Nobuhisa*; Fujimaki, Masaki*; Yamada, Kazunari*; Watanabe, Yutaka*; Koyama, Ryo*; Toyama, Takeshi*; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.49 - 54, 2018/08
no abstracts in English
Kondo, Keietsu; Aoki, So; Yamashita, Shinichiro; Ukai, Shigeharu*; Sakamoto, Kan*; Hirai, Mutsumi*; Kimura, Akihiko*
Nuclear Materials and Energy (Internet), 15, p.13 - 16, 2018/05
Times Cited Count：18 Percentile：87.82(Nuclear Science & Technology)Radiation hardening and microstructural evolution of ion irradiated 12Cr-6Al ODS ferritic steel was studied. Ion irradiation experiments were performed using Fe ions up to the nominal displacement damage of 20 dpa at the irradiation temperature was 300
C. The monotonical increase of radiation hardening with dose was confirmed by experimentally obtained hardness data. The radiation hardening was also calculated theoretically by introducing the microstructural character examined by TEM into the dispersed barrier hardening model. The results showed a good agreement with the experimentally obtained data up to 5 dpa, while a slight discrepancy was found between theoretical and experimental hardness values at 20 dpa. Radiation hardening was mainly caused by irradiation-induced defect clusters below the irradiation dose of 5 dpa. As the irradiation dose increased toward 20 dpa, an additional influence of the radiation appeared, which was assumed to be induced by 
' phase transformation.
Theis, C.*; Carbonez, P.*; Feldbaumer, E.*; Forkel-Wirth, D.*; Jaegerhofer, L.*; Pangallo, M.*; Perrin, D.*; Urscheler, C.*; Roesler, S.*; Vincke, H.*; et al.
EPJ Web of Conferences, 153, p.08018_1 - 08018_5, 2017/09
Times Cited Count：0 Percentile：0.03(Nuclear Science & Technology)At CERN, gas-filled ionization chambers PTW-34031 (PMI) are commonly used in radiation fields including neutrons, protons and 
-rays. A response function for each particle is calculated by the radiation transport code FLUKA. To validate a response function to high energy neutrons, benchmark experiments with quasi mono-energetic neutrons have been carried out at RCNP, Osaka University. For neutron irradiation with energies below 200 MeV, very good agreement was found comparing the FLUKA simulations and the measurements. In addition it was found that at proton energies of 250 and 392 MeV, results calculated with neutron sources underestimate the experimental data due to a non-negligible gamma component originating from the target 
Li(p,n)Be reaction.
Yamashita, Shinichiro; Nagase, Fumihisa; Kurata, Masaki; Nozawa, Takashi; Watanabe, Seiichi*; Kirimura, Kazuki*; Kakiuchi, Kazuo*; Kondo, Takao*; Sakamoto, Kan*; Kusagaya, Kazuyuki*; et al.
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09
In Japan, the research and development (R&D) project on accident tolerant fuel and other components (ATFs) of light water reactors (LWRs) has been initiated in 2015 for establishing technical basis of ATFs. The Japan Atomic Energy Agency (JAEA) has coordinated and carried out this ATF R&D project in cooperation with power plant providers, fuel venders and universities for making the best use of the experiences, knowledges in commercial uses of zirconium-base alloys (Zircaloy) in LWRs. ATF candidate materials under consideration in the project are FeCrAl steel strengthened by dispersion of fine oxide particles(FeCrAl-ODS) and silicon carbide (SiC) composite, and are expecting to endure severe accident conditions in the reactor core for a longer period of time than the Zircaloy while maintaining or improving fuel performance during normal operations. In this paper, the progresses of the R&D project are reported.
Kimura, Akihiko*; Yuzawa, Sho*; Sakamoto, Kan*; Hirai, Mutsumi*; Kusagaya, Kazuyuki*; Yamashita, Shinichiro
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09
The effect of Al addition on the PRW weldability of ODS steel is shown with the discussion focusing on the microstructure changes by the welding. The ordinary welding methods including electron beam (EB) welding and tungsten inert gas (TIG) welding were also applied to the SUS430 endcap welding to cladding tube made of FeCrAl-ODS steel. The endcap welded ODS steel tube samples were tensile tested at RT. The EB welded FeCrAl-ODS/SUS430 samples broke in the ODS steel tube, indicating that the weld bond is stronger than the ODS base metal. However, the TIG welded FeCrAl-ODS/SUS430 samples broke at a weld bond. X-ray CT scan analysis was performed for the weld bond, and the bonding strength was correlated with the X-ray CT results in order to assess the feasibility of those welding methods for ATF-ODS steel cladding.
Sakamoto, Kan*; Hirai, Mutsumi*; Ukai, Shigeharu*; Kimura, Akihiko*; Yamaji, Akifumi*; Kusagaya, Kazuyuki*; Kondo, Takao*; Yamashita, Shinichiro
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 7 Pages, 2017/09
This paper will show the overview of current status of development of accident tolerant FeCrAl-ODS fuel claddings for BWRs (boiling water reactors) in the program sponsored and organized by the Ministry of Economy, Trade and Industry (METI) of Japan. This program is being carried out to create the technical basis for the practical use of the accident tolerant fuels and the other components in LWRs through multifaceted activities. In the development of FeCrAl-ODS fuel claddings both the experimental and the analytical studies have been performed. The acquisition and accumulation of key material properties of FeCrAl-ODS fuel claddings were conducted by using bar, sheet and tube shaped FeCrAl-ODS materials fabricated in this program to support the evaluations in the analytical studies. A neutron irradiation test was also started in the ORNL High Flux Isotope Reactor (HFIR) to examine the effect of neutron irradiation on the mechanical properties.
Kobayashi, Takayuki; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Ikeda, Ryosuke; Oda, Yasuhisa; Wada, Kenji; Hinata, Jun; Yokokura, Kenji; Hoshino, Katsumichi; et al.
Proceedings of 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2015) (USB Flash Drive), 3 Pages, 2015/08
A gyrotron for electron cyclotron heating and current drive (ECH/CD) has been developed for JT-60SA (Super-Advanced). In high-power, long-pulse operations, oscillations of 1 MW/100 s have been demonstrated at both 110 GHz and 138 GHz, for the first time. These results fully satisfied the requirements for JT-60SA. Moreover, it was experimentally shown that the higher power operation at each frequency is expected to be acceptable for this gyrotron from the viewpoint of heat load at the cavity resonator, collector, and stray radiation absorbers. An oscillation at 82 GHz, which is an additional frequency, has been demonstrated up to 2 s at the output power of 0.4 MW, so far. High power experiments toward higher power of 1.5 MW (110/138 GHz) and 1 MW (82 GHz) are ongoing.
Kobayashi, Takayuki; Moriyama, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Hoshino, Katsumichi; et al.
Nuclear Fusion, 55(6), p.063008_1 - 063008_8, 2015/06
Times Cited Count：25 Percentile：77.41(Physics, Fluids & Plasmas)A gyrotron enabling high-power, long-pulse oscillations at both 110 GHz and 138 GHz has been developed for electron cyclotron heating (ECH) and current drive (CD) in JT-60SA. Oscillations of 1 MW for 100 s have been demonstrated at both frequencies, for the first time as a gyrotron operating at two frequencies. The optimization of the anode voltage, or the electron pitch factor, using a triode gun was a key to obtain high power and high efficiency at two frequencies. It was also confirmed that the internal losses in the gyrotron were sufficiently low for expected long pulse operation at the higher power level of 
1.5 MW. Another important result is that an oscillation at 82 GHz, which enables to use fundamental harmonic waves in JT-60SA while the other two frequencies are used as second harmonics waves, was demonstrated up to 0.4 MW for 2 s. These results of the gyrotron development significantly contribute to enhancing operation regime of the ECH/CD system in JT-60SA.
Kobayashi, Takayuki; Moriyama, Shinichi; Isayama, Akihiko; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.
EPJ Web of Conferences, 87, p.04008_1 - 04008_5, 2015/03
Times Cited Count：5 Percentile：83.48(Physics, Fluids & Plasmas)A dual-frequency gyrotron, which can generate 110 GHz and 138 GHz waves independently, is being developed in JAEA to enable electron cyclotron heating (ECH) and current drive (ECCD) in a wider range of plasma discharge conditions of JT-60SA. Operation for the gyrotron conditioning and parameter optimization toward 1 MW for 100 s, which is the target output power and pulse length for JT-60SA, is in progress without problems. Oscillations of 1 MW for 10 s and 0.51 MW for 198 s were obtained, so far, at both frequencies. In addition, an oscillation (0.3 MW for 20 ms) at 82 GHz was demonstrated as an additional frequency of the dual-frequency gyrotron which shows a possibility of the use of fundamental harmonic wave in JT-60SA.
Tokushima, Kazuyuki; Shibata, Hiroki; Kurata, Masaki; Sawada, Akihiko*; Sakamoto, Kan*
Annual Topical Meeting on Reactor Fuel Performance (TopFuel 2015), Conference Proceedings, Poster (Internet), p.478 - 485, 2015/00
Two type tests were performed to examine the prevention effect of the oxide layers to liquefaction interaction between Zircaloy and core component materials. The oxide layer of Zircaloy was clearly confirmed to prevent the liquefaction interaction under the temperature of melting point of stainless steel even if the oxide layer on Zircaloy of approximately 30 micro meters, which is thinner than it is predicted to be formed under typical accident condition. The oxide layers were able to be formed even in the region where the gas flow is significantly limited by narrow arrangement. Although the oxide layers at the inner position of upper end plug was hard to form, the prevention effect of the oxide layers was sufficiently observed. The axial variation of the thickness of the oxide layers was observed. It suggested that variation of partial pressure of H
O should be considered to evaluate the growth rate of the oxide layers for detail.
Matsumoto, Tetsuro*; Masuda, Akihiko*; Nishiyama, Jun*; Harano, Hideki*; Iwase, Hiroshi*; Iwamoto, Yosuke; Hagiwara, Masayuki*; Satoh, Daiki; Yashima, Hiroshi*; Nakane, Yoshihiro; et al.
Progress in Nuclear Science and Technology (Internet), 4, p.332 - 336, 2014/04
Recently, many high-energy accelerators are used for various fields. Shielding data for high-energy neutrons are therefore very important from the point of view of radiation protection in high energy accelerator facilities. However, the shielding experimental data for high energy neutrons above 100 MeV are very poor both in quality and in quantity. In this study, neutron penetration spectral fluence and ambient dose through iron and concrete shields were measured with a Bonner sphere spectrometer (BSS). Quasi-monoenergetic neutrons were produced by the Li(p,xn) reaction by bombarding a 1-cm thick Li target with 246-MeV and 389-MeV protons in the Research Center for Nuclear Physics (RCNP) of the Osaka University. Shielding materials are iron blocks with a thickness from 10 cm to 100 cm and concrete blocks with a thickness from 25 cm to 300 cm.
Hagiwara, Masayuki*; Iwase, Hiroshi*; Iwamoto, Yosuke; Satoh, Daiki; Matsumoto, Tetsuro*; Masuda, Akihiko*; Yashima, Hiroshi*; Nakane, Yoshihiro; Nakashima, Hiroshi; Sakamoto, Yukio; et al.
Progress in Nuclear Science and Technology (Internet), 4, p.327 - 331, 2014/04
We have developed several hundreds of MeV p-Li quasi-monoenergetic neutron fields in the Research Center for Nuclear Physics (RCNP), Osaka University, Japan. In this study, we extended the measurements to higher energy with a p-Li quasi-monoenergetic neutron source, which was produced from a 1.0-cm-thick lithium target bombarded with 246 and 389 MeV protons, using a larger NE213 scintillator of 25.4-cm in diameter and 25.4-cm in thickness. The large NE213 have good energy resolution for high energy neutrons, because it can stop recoil protons up to 180 MeV. The measured data are compared with the Monte-Carlo codes (PHITS with JENDL-HE data library) in the energy spectra, time spectra and the attenuation length of the peak neutrons. This comparison shows good agreement between experiments and calculations. The attenuation length estimated from the well-fitted curves with single exponential form will be useful for the practical shielding design of high energy accelerator facilities.
Nakane, Yoshihiro; Hagiwara, Masayuki*; Iwamoto, Yosuke; Iwase, Hiroshi*; Satoh, Daiki; Sato, Tatsuhiko; Yashima, Hiroshi*; Matsumoto, Tetsuro*; Masuda, Akihiko*; Nunomiya, Tomoya*; et al.
Progress in Nuclear Science and Technology (Internet), 4, p.704 - 708, 2014/04
no abstracts in English
Sakai, Kenji; Kai, Tetsuya; Oi, Motoki; Watanabe, Akihiko; Nakatani, Takeshi; Higemoto, Wataru; Meigo, Shinichiro; Sakamoto, Shinichi; Takada, Hiroshi; Futakawa, Masatoshi
Progress in Nuclear Science and Technology (Internet), 4, p.264 - 267, 2014/04
no abstracts in English
Kobayashi, Takayuki; Isayama, Akihiko; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.
Fusion Science and Technology, 63(1T), p.160 - 163, 2013/05
Times Cited Count：7 Percentile：49.06(Nuclear Science & Technology)A dual frequency electron cyclotron range of frequency system has been developed for JT-60SA, by which a second frequency (135 140 GHz) is generated in addition to the first frequency of 110 GHz. A development of a dual frequency gyrotron is a key to realize the dual frequency system. The second frequency was chosen to be 138 GHz from the above frequency range from the viewpoint of gyrotron design. In order to realize high-power (
1 MW) and long-pulse operation for both frequencies, we designed main components of the gyrotron (the diamond window, cavity resonator and quasi-optical mode converter). We found the optimum parameter set from the parameters of these components, which has discrete characteristics. It was confirmed that the output power higher than 1 MW is obtained for both frequencies as a result of numerical design. Based on the above design, a dual frequency gyrotron was newly fabricated. In the conditioning operation, an output power was obtained as we expected.
Kobayashi, Takayuki; Isayama, Akihiko; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.
Proceedings of 37th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2012) (USB Flash Drive), 2 Pages, 2012/09
A new dual frequency (110 GHz and 138 GHz) gyrotron development began for JT-60SA. An output power and efficiency higher than 1 MW and 30% with a peak heat load lower than 1.4 kW/cm
were obtained for both frequencies in calculation. High mode conversion efficiencies of the quasioptical mode converter (96.8% for 110 GHz and 98.3% for 138 GHz), which is higher than the previously developed 110 GHz long pulse gyrotron (96.5%), was obtained. The new gyrotron was fabricated and conditioning operation has been started from the middle of June 2012. The gyrotron output power of approximately 200 kW was obtained, so far, as we expected in the design of the gyrotron at low beam current of 10 A and low beam voltage of 75 kV.
