Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ono, Ayako; Sakashita, Hiroto*; Yamashita, Susumu; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 7 Pages, 2022/10
The new prediction method of critical heat flux (CHF) of the fuel assemblies based on the mechanism is proposed in this study. The prediction method of CHF based on the mechanism has been needed for a long time to enhance the safety analysis and reduce the design cost. From several experimental findings of the liquid-vapor behavior near the heating surface from the nucleate boiling to the CHF, the authors consider that the macrolayer dryout model will be appropriate to predict the CHF under the reactor condition. The prediction method of the macrolayer thickness and the passage period of vapor mass in the fuel assemblies are needed to predict CHF from the macrolayer dryout model. In this study, the CHF under the forced convection is evaluated by combining the prediction methods for the macrolayer thickness and passage period of vapor mass, which are proposed by authors. The prediction of the CHF under the forced convection is examined and compared with the experimental data.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
Japan Atomic Energy Agency is developing the computational fluid dynamics code, JUPITER, based on the volume of fluid (VOF) method to analyze detailed thermal-hydraulics in a reactor. The detailed numerical simulation of boiling from a heating surface needs a substantial computational cost to resolve the microscale thermal-hydraulic phenomena such as the bubble generation from a cavity and evaporation of a micro-layer. This study developed the simplified boiling model from the heating surface to reduce the computational cost, which will apply to the detailed simulation code based on the surface tracking method such as JUPITER. We applied the simplified boiling model to JUPITER, and compared the simulation results with the experimental data of the vertical heating surface in the forced convection. We confirmed the degree of their reproducibility, and the issues to be modified were extracted.
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
Dai-26-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 4 Pages, 2022/07
JAEA is implementing a simulation of a two-phase flow in the reactor core by TPFIT and JUPITER which are developed by JAEA based on the surface tracking method. However, it is impossible to simulate a boiling on the heating surface in the large-scale domain by this type of simulation method since the simulation of boiling based on the surface tracking method needs the fine mesh which sufficiently resolves the initiation of boiling. Therefore, JAEA started to develop the simplified boiling model applied for the two-phase flow in the fuel assemblies. In this study, the simulation results of the convection boiling on a vertical heating surface and the comparison between the simulation results and experimental results are shown.
Yokota, Wataru; Sato, Takahiro; Kamiya, Tomihiro; Okumura, Susumu; Kurashima, Satoshi; Miyawaki, Nobumasa; Kashiwagi, Hirotsugu; Yoshida, Kenichi; Funayama, Tomoo; Sakashita, Tetsuya; et al.
JAEA-Technology 2014-018, 103 Pages, 2014/09
The world's first microbeam focusing technology for heavy ions of hundreds MeV accelerated by a cyclotron has been developed at the TIARA facility in the Takasaki Advanced Radiation Research Institute of the Japan Atomic Energy Agency. The technology enables us to form a microbeam of less than 1 m in diameter and to shoot a specified point on a target by one ion (single-ion hit) with spatial accuracy of microbeam size. In the course of the development, a cyclotron technology to accelerate a small energy-spread beam of hundres MeV, which is necessary for focusing to 1 m, has been developed as well as a beam focusing apparatus, beam size measurement and so forth based on the several-MeV microbeam/single-ion hit system of the TIARA electrostatic accelerators. Applicability of the technologies was examined by actual use in irradiation experiment and the result were fed back to them. This paper reports the process and the results of the development over ten years.
Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review C, 83(6), p.064903_1 - 064903_29, 2011/06
Times Cited Count:184 Percentile:99.45(Physics, Nuclear)Transverse momentum distributions and yields for , and in collisions at = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the RHIC. We present the inverse slope parameter, mean transverse momentum, and yield per unit rapidity at each energy, and compare them to other measurements at different collisions. We also present the scaling properties such as and scaling and discuss the mechanism of the particle production in collisions. The measured spectra are compared to next-to-leading order perturbative QCD calculations.
Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Aramaki, Y.*; et al.
Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04
Times Cited Count:9 Percentile:49.6(Physics, Nuclear)Measurements of electrons from the decay of open-heavy-flavor mesons have shown that the yields are suppressed in Au+Au collisions compared to expectations from binary-scaled collisions. Here we extend these studies to two particle correlations where one particle is an electron from the decay of a heavy flavor meson and the other is a charged hadron from either the decay of the heavy meson or from jet fragmentation. These measurements provide more detailed information about the interaction between heavy quarks and the quark-gluon matter. We find the away-side-jet shape and yield to be modified in Au+Au collisions compared to collisions.
Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Y.*; Al-Bataineh, H.*; Alexander, J.*; Aoki, K.*; Aphecetche, L.*; Armendariz, R.*; et al.
Physical Review D, 83(5), p.052004_1 - 052004_26, 2011/03
Times Cited Count:177 Percentile:98.48(Astronomy & Astrophysics)The PHENIX experiment at RHIC has measured the invariant differential cross section for production of , , and mesons in collisions at = 200 GeV. The spectral shapes of all hadron transverse momentum distributions are well described by a Tsallis distribution functional form with only two parameters, and , determining the high and characterizing the low regions for the spectra, respectively. The integrated invariant cross sections calculated from the fitted distributions are found to be consistent with existing measurements and with statistical model predictions.
Yoshimura, Kimitaka*; Sakashita, Susumu*; Okubo, Shuichi*; Yamane, Kazunobu*; Seya, Masami
Shadan Hojin Butsuri Tansa Gakkai Dai-115-Kai (Heisei-18-Nendo Shuki) Gakujutsu Koenkai Rombunshu, p.209 - 212, 2006/10
3D MT inversion development has been conducted to solve issues in electromagnetic exploration in the radioactive waste disposal area. Radioactive Waste Management Funding and Research Center (RWMC) operated field work to confirm how the 3D inversion code worked in low resistivity geology at Horonobe area, Hokkaido in 2005 and applied the code to AMT data. Data suggests possibility to estimate salinity of groundwater in the area of lower resistivety than 1ohm-m.
Fukuda, Mitsuhiro; Arakawa, Kazuo; Sato, Takahiro; Okumura, Susumu; Saito, Yuichi; Kashiwagi, Hirotsugu; Miyawaki, Nobumasa; Yuri, Yosuke; Ishii, Yasuyuki; Kobayashi, Yasuhiko; et al.
no journal, ,
no abstracts in English
Sakashita, Susumu*; Konishi, Chisato*; Yoshimura, Kimitaka*; Okazaki, Koji*; Shigeta, Naotaka; Yabuuchi, Satoshi; Yamanaka, Yoshiaki*
no journal, ,
no abstracts in English
Ono, Ayako; Yamashita, Susumu; Sakashita, Hiroto*; Suzuki, Takayuki*; Yoshida, Hiroyuki
no journal, ,
JAEA is implementing a simulation of a two-phase flow in the reactor core by TPFIT and JUPITER which are developed by JAEA based on the surface tracking method. However, it is impossible to simulate a boiling on the heating surface in the large-scale domain by this type of simulation method since the simulation of boiling based on the surface tracking method needs the fine mesh which sufficiently resolves the initiation of boiling. Therefore, JAEA started to develop the simplified boiling model applied for the two-phase flow in the fuel assemblies. In this study, the simulation results of the convection boiling on vertical heating surface and the comparison between the simulation results and experimental results are shown.