Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 41

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

JAEA Reports

Database for corrosion under irradiation conditions (Contract research)

Sato, Tomonori; Hata, Kuniki; Kaji, Yoshiyuki; Ueno, Fumiyoshi; Inoue, Hiroyuki*; Taguchi, Mitsumasa*; Seito, Hajime*; Tada, Eiji*; Abe, Hiroshi*; Akiyama, Eiji*; et al.

JAEA-Review 2021-001, 123 Pages, 2021/06

JAEA-Review-2021-001.pdf:10.33MB

In the implement of the decommissioning of Fukushima Daiichi Nuclear Power Station (1F), there are many problems to be solved. Specially, the mitigation of the aging degradation by the corrosion of the structural materials is important to implement the decommissioning safely and continuously. However, there are limited data for the environmental factors of corrosion in 1F, and the condition of 1F is continuously changing. So, the literature data for the water radiolysis and the corrosion under irradiation are listed as the database of corrosion under irradiation in this report. And the new obtained radiolysis and corrosion data, which have not been reported in the literature and will be required in the decommissioning of 1F, are reported.

Journal Articles

Corrosion monitoring in humidity-controlled environment simulating gamma ray irradiation

Omori, Atsushi*; Akiyama, Eiji*; Abe, Hiroshi*; Hata, Kuniki; Sato, Tomonori; Kaji, Yoshiyuki; Inoue, Hiroyuki*; Taguchi, Mitsumasa*; Seito, Hajime*; Tada, Eiji*; et al.

Zairyo To Kankyo, 69(4), p.107 - 111, 2020/04

To evaluate the effect of oxidants, which are formed by radiolysis of water under gamma ray irradiation, on the corrosion of a carbon steel in humid environment, ozone was introduced as a model oxidant in to humidity-controlled air at 50$$^{circ}$$C in a thermo-hygrostat chamber. Corrosion monitoring was performed by using an Atmospheric Corrosion Monitor-type (ACM) sensor consisting of a carbon steel anode and an Ag cathode. The output current of the ACM sensor was increased with the increase in relative humidity and it was obviously increased with the increase in the introduced ozone concentration at each relative humidity. The results indicate that ozone accelerates the corrosion of the carbon steel. The effect of ozone on the corrosion acceleration is attributed to the fast reduction reaction and fast dissolution reaction in to water compared to that of oxygen.

Journal Articles

Heavy fermion state of YbNi$$_2$$Si$$_3$$ without local inversion symmetry

Nakamura, Shota*; Hyodo, Kazushi*; Matsumoto, Yuji*; Haga, Yoshinori; Sato, Hitoshi*; Ueda, Shigenori*; Mimura, Kojiro*; Saiki, Katsuyoshi*; Iso, Kosei*; Yamashita, Minoru*; et al.

Journal of the Physical Society of Japan, 89(2), p.024705_1 - 024705_5, 2020/02

 Times Cited Count:2 Percentile:22.58(Physics, Multidisciplinary)

Journal Articles

Magnetic properties of electron-doped LaCoO$$_3$$

Tomiyasu, Keisuke*; Sato, Mika*; Koyama, Shunichi*; Nojima, Tsutomu*; Kajimoto, Ryoichi; Ji, S.*; Iwasa, Kazuaki*

Journal of the Physical Society of Japan, 86(9), p.094706_1 - 094706_6, 2017/09

 Times Cited Count:4 Percentile:36.07(Physics, Multidisciplinary)

Journal Articles

Development of U and Pu co-processing process; Demonstration of U, Pu and Np Co-recovery with centrifugal contactors

Kudo, Atsunari; Kurabayashi, Kazuaki; Yanagibashi, Futoshi; Sasaki, Shunichi; Sato, Takehiko; Fujimoto, Ikuo; Obu, Tomoyuki

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 6 Pages, 2017/04

The Co-processing process is the extraction process to recover Pu/U mixed product solution with given Pu/U ratio for improving of nuclear proliferation resistance. In addition, Np is also recovered with U and Pu because Np is one of minor actinides and a long-lived radionuclide and Np has the extractability into TBP solvent. Development of its flowsheet achieves to decrease environmental effect of waste materials. The orientation of development about Co-processing process is to demonstrate of reprocessing the future spent fuels from a LWR, a LWR-MOX hybrid, and a FR-MOX with one cycle. We demonstrated by use of miniature reflux-type centrifugal contactors at the partitioning unit. The test conditions of the Pu/U ratio in the loaded solvents were 1%, 3%, and 5% considering the composition of spent fuels. We used the HAN as the reductant of Np (VI) for back extraction. The results of these tests were very good. We got the prospect of U, Pu, and Np Co-processing flowsheet.

Journal Articles

Application of $$^{67}$$Cu produced by $$^{68}$$Zn($$n,n'p+d$$)$$^{67}$$Cu to biodistribution study in tumor-bearing mice

Sugo, Yumi*; Hashimoto, Kazuyuki*; Kawabata, Masako*; Saeki, Hideya*; Sato, Shunichi*; Tsukada, Kazuaki; Nagai, Yasuki*

Journal of the Physical Society of Japan, 86(2), p.023201_1 - 023201_3, 2017/02

 Times Cited Count:13 Percentile:68.41(Physics, Multidisciplinary)

$$^{67}$$Cu produced by the $$^{68}$$Zn($$n,n'p+d$$)$$^{67}$$Cu reaction was used for the first time to determine the biodistribution of $$^{67}$$CuCl$$_{2}$$ in colorectal tumor-bearing mice. High uptake of $$^{67}$$Cu was observed in the tumor as well as in the liver and kidney which are the major organs for copper metabolism. The result showing $$^{67}$$Cu accumulation in the tumor suggests that $$^{67}$$CuCl$$_{2}$$ can be a potential radionuclide agent for cancer radiotherapy. It would also encourage further studies on the therapeutic effect in small animals using an increased dose of $$^{67}$$Cu produced by the $$^{68}$$Zn($$n,n'p+d$$)$$^{67}$$Cu reaction using intense neutrons available at present.

Journal Articles

High intensity, high temporal contrast, high repetition-rate laser for laser driven particle acceleration

Suzuki, Masayuki; Kiriyama, Hiromitsu; Daito, Izuru; Okada, Hajime; Ochi, Yoshihiro; Sato, Masatoshi*; Yoshii, Takehiro*; Tamaoki, Yoshinori*; Maeda, Junya*; Matsuoka, Shinichi*; et al.

AIP Conference Proceedings 1465, p.53 - 57, 2012/07

 Times Cited Count:0 Percentile:0.13

We have reported hundred mJ level, femtosecond pulse duration with the high temporal contrast in an OPCPA/Yb:YAG ceramic thin disk laser system at 10 Hz repetition rate. At an input laser pulse energy of 3.8 mJ from the OPCPA preamplifer the output energy of 130 mJ with spectral bandwidth of 2.5 nm has been obtained from multipass Yb:YAG ceramic thin disk amplifier, and the optical efficiency from LD energy to amplified laser pulse is 9.6%. The recompressed laser pulse duration was measured to be 450 fs. Because the compressor efficiency exceeds 73% the compressed pulse energy can potentially be as high as 95 mJ. The contrast level of this laser pulse was measured to be less than 7.2$$times$$10$$^{-9}$$ at -150 ps. This novel laser system after further amplification using additional amplifiers can be useful for the laser-driven proton acceleration in future.

Journal Articles

Development of a compact high-spatiotemporal-quality Yb:YAG thin-disk laser system using an optical parametric preamplifier

Kiriyama, Hiromitsu; Suzuki, Masayuki*; Daito, Izuru; Okada, Hajime; Ochi, Yoshihiro; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; Maeda, Junya*; Matsuoka, Shinichi*; et al.

Reza Kenkyu, 40(2), p.143 - 145, 2012/02

We demonstrate a compact, high-spatiotemporal-quality, high-intensity diode-pumped Yb:YAG thin-disk chirped-pulse amplification (CPA) laser system that incorporates a nonlinear preamplifier based on optical parametric chirped-pulse amplification (OPCPA). The stretched pulses are amplified in the OPCPA preamplifier and the following Yb:YAG main amplifier to $$sim$$100 mJ at 10 Hz. The broadband amplified beam quality of 1.1 (horizontal direction) and 1.4 (vertical direction) times diffraction limited and pulse compression down to 470 fs with contrast of better than 10$$^{-8}$$ have been achieved successfully.

Journal Articles

Hundred mJ, sub-picoseconds, high temporal contrast OPCPA/Yb:YAG ceramic thin disk hybrid laser system

Suzuki, Masayuki*; Kiriyama, Hiromitsu; Daito, Izuru; Ochi, Yoshihiro; Okada, Hajime; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; Maeda, Junya*; Matsuoka, Shinichi*; et al.

Applied Physics B, 105(2), p.181 - 184, 2011/11

 Times Cited Count:5 Percentile:28.75(Optics)

We have demonstrated an OPCPA/Yb:YAG ceramic thin disk hybrid laser system having hundred mJ level pulse energy sub-picosecond pulse duration with high temporal contrast. At an input energy of 3.8 mJ from an OPCPA preamplifier an output energy of 130 mJ was obtained from Yb:YAG ceramic thin disk amplifier. A recompressed pulse duration of 450 fs with a contrast level of less than 7.2$$times$$10$$^-9$$ was obtained. The contrast level is the highest value achieved in Yb:YAG chirped pulse amplification (CPA) laser system with hundred mJ level.

Journal Articles

Measurement of DNA double-strand break yield in human cancer cells by high-current, short-duration bunches of laser-accelerated protons

Yogo, Akifumi; Sato, Katsutoshi; Nishikino, Masaharu; Maeda, Takuya*; Sakaki, Hironao; Hori, Toshihiko*; Ogura, Koichi; Nishiuchi, Mamiko; Teshima, Teruki*; Nishimura, Hiroaki*; et al.

Japanese Journal of Applied Physics, 50(10), p.106401_1 - 106401_7, 2011/10

 Times Cited Count:8 Percentile:34.77(Physics, Applied)

Journal Articles

Multi-millijoule, nonlinear preamplifier for high intensity femtosecond Yb:YAG chirped-pulse amplification lasers at 1030 nm

Suzuki, Masayuki; Kiriyama, Hiromitsu; Daito, Izuru; Okada, Hajime; Nakai, Yoshiki; Orimo, Satoshi; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; Maeda, Junya*; et al.

Applied Physics B, 97(2), p.379 - 382, 2009/10

 Times Cited Count:7 Percentile:37.62(Optics)

We report the highest energy broadband laser pulses at a center wavelength of 1030 nm based on optical parametric chirped-pulse amplification (OPCPA). We have demonstrated amplification of 1030 nm femtosecond laser pulses from a broadband Yb oscillator to over 6.5 mJ with a total gain of greater than 10$$^{7}$$ achieved in a single pass through only 56 mm of gain material at a 10 Hz repetition rate. The amplified spectral bandwidth of 10.8 nm affords recompression to a 230 fs pulse duration following amplification. As an alternative to the regenerative amplifier (RA) this system is one of the more promising candidates for realizing compact, high intensity, direct diode pumped, high repetition rate femtosecond Yb:YAG chirped-pulse amplification (CPA) in laser systems.

Journal Articles

Effect of proton beam profile on stress in JSNS target vessel

Kogawa, Hiroyuki; Ishikura, Shuichi*; Sato, Hiroshi; Harada, Masahide; Takatama, Shunichi*; Futakawa, Masatoshi; Haga, Katsuhiro; Hino, Ryutaro; Meigo, Shinichiro; Maekawa, Fujio; et al.

Journal of Nuclear Materials, 343(1-3), p.178 - 183, 2005/08

 Times Cited Count:8 Percentile:49.23(Materials Science, Multidisciplinary)

A cross-flow type (CFT) mercury target with flow guide blades, which has been developed for JSNS, can suppress the generation of stagnant flow region especially near the beam window where the peak heat density is generated due to spallation reaction. Then, a flat type beam window has been applied to the CFT target from the viewpoint of suppressing dynamic stress caused by a pressure wave, which has been estimated with a mercury model of the linear equation of state. The recent experimental results obtained by using a proton beam incidents to mercury led that a cutoff pressure model in the equation of state of mercury caused a suitable dynamic stress with experimental results. Dynamic stress analyses were carried out with the cutoff pressure model, in which the negative pressure less than 0.15 MPa was not generated. The generated dynamic stress in the flat beam window became much larger than that in a semi-cylindrical type window. However, the generated stress in the semi-cylindrical type beam window was over the allowable stress of SS316L under the peak heat density of 668 W/cc. In order to decrease the dynamic stress in the semi-cylindrical beam window, the incident proton beam was defocused to decrease the peak heat density down to 218 W/cm$$^{3}$$. As a result, the dynamic stress could be suppressed less than the allowable stress. On the other hand, due to defocus of the proton beam, high heat density was generated on the end of the flow guide blades, which caused high thermal stress exceeding the allowable stress. To decrease the thermal stress, several shapes of the blade ends were studied analytically, which were selected so as not to affect the mercury flow distribution. A simple thin-end blade showed low thermal stress below the allowable stress.

Journal Articles

Operational Experience Result of Volume Reduction and Stabilization Treatment at PWTF

Shibata, Yuichi; Hareo, Ueta,; Sato, Shunichi; Fukui, Masahiro; Gorai, Hiroyasu*; Tamura, Tetsuro*

Dekomisshoningu Giho, (29), p.2 - 12, 2004/03

None

JAEA Reports

Dose conversion coefficients for high-energy photons, electrons, neutrons and protons

Sakamoto, Yukio; Sato, Osamu*; Tsuda, Shuichi; Yoshizawa, Nobuaki*; Iwai, Satoshi*; Tanaka, Shunichi; Yamaguchi, Yasuhiro

JAERI 1345, 103 Pages, 2003/01

JAERI-1345.pdf:4.95MB

no abstracts in English

Journal Articles

Multihundred-watt CO laser power delivery through chalcogenide glass fibers

Sato, Shunichi*; Igarashi, Kaoru*; Taniwaki, Manabu*; ; Kikuchi, Yutaka

Applied Physics Letters, 62(7), p.669 - 671, 1993/02

 Times Cited Count:30 Percentile:80.84(Physics, Applied)

None

JAEA Reports

The First loading fuel elements and power-up for JRR-2

JRR-2 Control Office; Kambara, Toyozo; Shoda, Katsuhiko; Hirata, Yutaka; Shoji, Tsutomu; Kohayakawa, Toru; Morozumi, Minoru; Kambayashi, Yuichiro; Shitomi, Hajimu; Kokanezawa, Takashi; et al.

JAERI 1027, 57 Pages, 1962/09

JAERI-1027.pdf:4.76MB

no abstracts in English

JAEA Reports

Critical experiments and characteristic measurement for JRR-2

JRR-2 Critical Experiments Group; Kambara, Toyozo; Shoda, Katsuhiko; Hirata, Yutaka; Shoji, Tsutomu; Kohayakawa, Toru; Morozumi, Minoru; Kambayashi, Yuichiro; Shitomi, Hajimu; Kokanezawa, Takashi; et al.

JAERI 1025, 62 Pages, 1962/03

JAERI-1025.pdf:4.6MB

no abstracts in English

Oral presentation

Demonstrated operation of chlorine contained waste incinerator, 2

Shibata, Yuichi; Tamura, Masanori; Sato, Shunichi; Iimura, Izumi; Usui, Kazuya

no journal, , 

no abstracts in English

Oral presentation

Multimillijoule optical parametric chirped-pulse amplifier as an alternative to Yb:YAG regenerative amplifiers at 1030 nm

Suzuki, Masayuki; Kiriyama, Hiromitsu; Daito, Izuru; Okada, Hajime; Sato, Masatoshi*; Matsuoka, Shinichi*; Yoshii, Takehiro*; Kan, Hirofumi*; Bolton, P.; Daido, Hiroyuki; et al.

no journal, , 

Oral presentation

Development of broadband nonlinear preamplifier for laser-diode-pumped Yb:YAG CPA laser system

Suzuki, Masayuki; Kiriyama, Hiromitsu; Daito, Izuru; Okada, Hajime; Sato, Masatoshi*; Yoshii, Takehiro*; Tamaoki, Yoshinori*; Maeda, Junya*; Matsuoka, Shinichi*; Kan, Hirofumi*; et al.

no journal, , 

We have demonstrated amplification of 1030 nm broadband chirped-pulses from an ytterbium (Yb) femtosecond oscillator to over 6.5 mJ with a total gain of greater than 10$$^{7}$$ achieved by a single pass through only 56 mm of gain material at a 10 Hz repetition rate. The amplified broad bandwidth of 10.8 nm affords recompression to a 230 fs pulse duration following amplification. This novel system is a promising alternative to the RA as a nonlinear preamplifier for compact, high intensity, Yb:YAG CPA laser using DPPSL systems.

41 (Records 1-20 displayed on this page)