Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Vostner, A.*; Pong, I.*; Bessette, D.*; Devred, A.*; Sgobba, S.*; Jung, A.*; Weiss, K.-P.*; Jewell, M. C.*; Liu, S.*; Yu, W.*; et al.
IEEE Transactions on Applied Superconductivity, 23(3), p.9500705_1 - 9500705_5, 2013/06
Times Cited Count：11 Percentile：51.85(Engineering, Electrical & Electronic)The ITER Cable-In-Conduit Conductor (CICC) used in the superconducting magnet system consists of a cable made of 300 to 1440 strands housed in a stainless steel tube (a.k.a. jacket or conduit). There are circular, square, as well as circle-in-square jackets, made of either a very low carbon AISI 316LN grade stainless steel or a high Mn austenitic stainless steel developed for ITER called JK2LB. Selected mechanical properties of the base material and weld joint were tested at room temperature and/or cryogenic temperatures (
7 K). The Domestic Agencies (DAs) reference laboratories and the ITER-IO appointed reference laboratories, CERN and Karlsruhe Institute of Technology (KIT) performed mechanical tests. This paper will compare the test results (e.g. elongation to failure) from different laboratories.
Libeyre, P.*; Bessette, D.*; Jewell, M.*; Jong, C.*; Lyraud, C.*; Rodriguez-Mateos, M.*; Hamada, Kazuya; Reiersen, W.*; Martovetsky, N.*; Rey, C.*; et al.
IEEE Transactions on Applied Superconductivity, 22(3), p.4201104_1 - 4201104_4, 2012/06
Times Cited Count：7 Percentile：42.2(Engineering, Electrical & Electronic)The Central Solenoid (CS) of the ITER magnet system will play a major role in tokamak operation, providing not only the major part of the inductive flux variation required to drive the plasma but also contributing to the shaping of the field lines and to vertical stability control. To meet these requirements, the design has been optimised by splitting the CS into six independently powered coils enclosed inside an external structure which provides vertical precompression thus preventing separation of the coils and, additionally, acting as a support to net resulting loads. To ensure that the CS design meets the ITER criteria, several analyses are performed along with a series of R&D trials to qualify the technologies to be used for the manufacture of the conductor, the coils and the structure.
