Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kondo, Yasuhiro; Chimura, Motoki; Cicek, E.*; Fukui, Yuji*; Futatsukawa, Kenta*; Fuwa, Yasuhiro; Goto, Rikuto*; Hirano, Koichiro; Ishikawa, Masaki*; Ito, Takashi; et al.
Proceedings of 22nd Annual Meeting of Particle Accelerator Society of Japan (Internet), p.124 - 129, 2026/03
Various upgrade plans of the J-PARC linac are underway, and repetition-rate doubling project is one of the most important part. Currently, the linac supplies a 400~MeV H
ion beam to the 3~GeV synchrotron (RCS) at a repetition rate of 25~Hz. However, to deliver the beam to both RCS and proton-beam irradiation facility under planning, it is necessary to raise the repetition rate from 25~Hz to 50~Hz. Prior to construction of the beamline to the irradiation facility, we conducted a verification of the 50~Hz operation of all the linac apparatus simultaneously within the current operational limits in May 2025. And also, the verification of the 50~Hz operation of the particle counter system, which is one of the most important safety device of the J-PARC accelerator, was conducted. As a result, any significant problems were not found out, and it is now ready for the upcoming 50~Hz-beam acceleration demonstration. This paper describes this details of the demonstration of the 50~Hz operation, without beam acceleration, of the J-PARC linac.
Shibata, Motoki*; Takenaka, Mikihito*; Motokawa, Ryuhei; Kumada, Takayuki; Ueda, Yuki; Miyazaki, Tsukasa*; Nakanishi, Yohei*; Abe, Jun*; Iwase, Hiroki*; Shibayama, Mitsuhiro*; et al.
Polymer, 340, p.129203_1 - 129203_7, 2025/12
Times Cited Count:0 Percentile:0.00(Polymer Science)
-butadiene) reinforced by carbon blackWatanabe, Yuki*; Kumagawa, Daiki*; Karitani, Shu*; Inoue, Tadashi*; Iwabuki, Hitoshi*; Nakanishi, Yohei*; Shibata, Motoki*; Motokawa, Ryuhei; Sugita, Tsuyoshi; Ueda, Yuki; et al.
Macromolecules, 58(16), p.8641 - 8648, 2025/08
Times Cited Count:0 Percentile:0.00(Polymer Science)Tamura, Yukiko*; Arakawa, Masato*; Takenaka, Mikihito*; Nakanishi, Yohei*; Fujinami, So*; Shibata, Motoki*; Yamamoto, Katsuhiro*; Miyata, Noboru*; Yamada, Masako*; Seto, Hideki*; et al.
Polymer, 333, p.128662_1 - 128662_8, 2025/08
Times Cited Count:1 Percentile:27.35(Polymer Science)Miyazaki, Tsukasa*; Miyata, Noboru*; Arima-Osonoi, Hiroshi*; Shimokita, Keisuke*; Yamamoto, Katsuhiro*; Takenaka, Mikihito*; Nakanishi, Yohei*; Shibata, Motoki*; Aoki, Hiroyuki; Yamada, Norifumi*; et al.
Colloids and Surfaces A; Physicochemical and Engineering Aspects, 701, p.134928_1 - 134928_8, 2024/11
Times Cited Count:1 Percentile:5.16(Chemistry, Physical)Shimokita, Keisuke*; Yamamoto, Katsuhiro*; Miyata, Noboru*; Shibata, Motoki*; Nakanishi, Yohei*; Arakawa, Masato*; Takenaka, Mikihito*; Kida, Takumitsu*; Tokumitsu, Katsuhisa*; Tanaka, Ryo*; et al.
Langmuir, 40(30), p.15758 - 15766, 2024/07
Times Cited Count:5 Percentile:44.42(Chemistry, Multidisciplinary)Nakanishi, Yohei*; Shibata, Motoki*; Sawada, Satoshi*; Kondo, Hiroaki*; Motokawa, Ryuhei; Kumada, Takayuki; Yamamoto, Katsuhiro*; Mita, Kazuki*; Miyazaki, Tsukasa*; Takenaka, Mikihito*
Polymer, 306, p.127209_1 - 127209_7, 2024/06
Times Cited Count:9 Percentile:65.72(Polymer Science)Shibata, Motoki*; Nakanishi, Yohei*; Abe, Jun*; Arima, Hiroshi*; Iwase, Hiroki*; Shibayama, Mitsuhiro*; Motokawa, Ryuhei; Kumada, Takayuki; Takata, Shinichi; Yamamoto, Katsuhiro*; et al.
Polymer Journal, 55(11), p.1165 - 1170, 2023/11
Times Cited Count:6 Percentile:32.78(Polymer Science)Shimokita, Keisuke*; Yamamoto, Katsuhiro*; Miyata, Noboru*; Nakanishi, Yohei*; Shibata, Motoki*; Takenaka, Mikihito*; Yamada, Norifumi*; Seto, Hideki*; Aoki, Hiroyuki; Miyazaki, Tsukasa*
Soft Matter, 19(11), p.2082 - 2089, 2023/03
Times Cited Count:6 Percentile:58.16(Chemistry, Physical)Shimokita, Keisuke*; Yamamoto, Katsuhiro*; Miyata, Noboru*; Arima-Osonoi, Hiroshi*; Nakanishi, Yohei*; Takenaka, Mikihito*; Shibata, Motoki*; Yamada, Norifumi*; Seto, Hideki*; Aoki, Hiroyuki; et al.
Langmuir, 38(41), p.12457 - 12465, 2022/10
Times Cited Count:3 Percentile:13.74(Chemistry, Multidisciplinary)Okabe, Kota; Liu, Y.*; Otani, Masashi*; Moriya, Katsuhiro; Shibata, Takanori*; Chimura, Motoki*; Hirano, Koichiro; Oguri, Hidetomo; Kinsho, Michikazu
JPS Conference Proceedings (Internet), 33, p.011011_1 - 011011_6, 2021/03
To realize more stable operation of the J-PARC accelerators, we have a re-design plan of an MEBT1 (Medium Energy Beam Transport). At the J-PARC Linac, the MEBT1 has transverse and longitudinal beam matching section for the DTLs. However there are some locally activated spots in DTL area at the current beam power level. To reduce beam loss during a beam acceleration at the DTLs is a most important task for a stable user operation. The first thing we should do is investigation a connection between beam quality in the MEBT1 and parameters of the upstream hardware. In this presentation, we will report a high intensity beam study results at the MEBT1.
SGo, Shintaro*; Ideguchi, Eiji*; Yokoyama, Rin*; Aoi, Nori*; Azaiez, F.*; Furutaka, Kazuyoshi; Hatsukawa, Yuichi; Kimura, Atsushi; Kisamori, Keiichi*; Kobayashi, Motoki*; et al.
Physical Review C, 103(3), p.034327_1 - 034327_8, 2021/03
Times Cited Count:5 Percentile:37.60(Physics, Nuclear)
SGo, Shintaro*; Ideguchi, Eiji*; Yokoyama, Rin*; Kobayashi, Motoki*; Kisamori, Keiichi*; Takaki, Motonobu*; Miya, Hiroyuki*; Ota, Shinsuke*; Michimasa, Shinichiro*; Shimoura, Susumu*; et al.
JPS Conference Proceedings (Internet), 6, p.030005_1 - 030005_4, 2015/06