Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel

Mao, W.; Gao, S.*; Gong, W.; Bai, Y.*; Harjo, S.; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*

Acta Materialia, 256, p.119139_1 - 119139_16, 2023/09

https://doi.org/10.1016/j.actamat.2023.119139

Transformation-induced plasticity (TRIP)-assisted steels exhibit an excellent combination of strength and ductility due to enhanced strain hardening rate associated with deformation-induced martensitic transformation (DIMT). Quantitative evaluation on the role of DIMT in strain hardening behavior of TRIP-assisted steels and alloys can provide guidance for designing advanced materials with strength and ductility synergy, which is, however, difficult since the phase composition keeps changing and both stress and plastic strain are dynamically partitioned among constituent phases during deformation. In the present study, tensile deformation with neutron diffraction measurement was performed on an Fe-24Ni-0.3C (wt.%) TRIP-assisted austenitic steel. The analysis method based on stress partitioning and phase fractions measured by neutron diffraction was proposed, by which the tensile flow stress and the strain hardening rate of the specimen were resolved into factors associated with each phase, i.e., the austenite matrix, deformation-induced martensite, and the transformation rate of DIMT after differentiation, and then the role of each factor in the global strain hardening behavior was discussed. In addition, the plastic strain partitioning between austenite and martensite was indirectly estimated using the dislocation density measured by diffraction profile analysis, which constructed the full picture of stress and strain partitioning between austenite and martensite in the material. The results suggested that both the transformation rate and the phase stress borne by the deformation-induced martensite played important roles in the global tensile properties of the material. The proposed decomposition analysis method could be widely applied to investigating mechanical behavior of multi-phase alloys exhibiting the TRIP phenomenon.

Unexpected dynamic transformation from phase to phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation

Guo, B.*; Mao, W.; Chong, Y.*; Shibata, Akinobu*; Harjo, S.; Gong, W.; Chen, H.*; Jonas, J. J.*; Tsuji, Nobuhiro*

Acta Materialia, 242, p.118427_1 - 118427_11, 2023/01

https://doi.org/10.1016/j.actamat.2022.118427

Grain orientation dependence of deformation microstructure evolution and mechanical properties in face-centered cubic high/medium entropy alloys

Yoshida, Shuhei*; Fu, R.*; Gong, W.; Ikeuchi, Takuto*; Bai, Y.*; Feng, Z.*; Wu, G.*; Shibata, Akinobu*; Hansen, N.*; Huang, X.*; et al.

IOP Conference Series; Materials Science and Engineering, 1249, p.012027_1 - 012027_6, 2022/08

https://doi.org/10.1088/1757-899X/1249/1/012027

Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation

Mao, W.; Gao, S.*; Bai, Y.*; Park, M.-H.*; Shibata, Akinobu*; Tsuji, Nobuhiro*

Journal of Materials Research and Technology, 17, p.2690 - 2700, 2022/03

https://doi.org/10.1016/j.jmrt.2022.02.031

Metastable austenitic steels having ultrafine grained (UFG) microstructures can be fabricated by conventional cold rolling and annealing processes by utilizing the deformation-induced martensitic transformation during cold rolling and its reverse transformation to austenite upon annealing. However, such processes are not applicable when the austenite has high mechanical stability against deformation-induced martensitic transformation, since there is no sufficient amount of martensite formed during cold rolling. In the present study, a two-step cold rolling and annealing process was applied to an Fe-24Ni-0.3C metastable austenitic steel having high mechanical stability. Prior to the cold rolling, a repetitive subzero treatment and reverse annealing treatment were applied. Such a treatment dramatically decreased the mechanical stability of the austenite and greatly accelerated the formation of deformation-induced martensite during the following cold rolling processes. As a result, the grain refinement was significantly promoted, and a fully recrystallized specimen with a mean austenite grain size of 0.5 mm was successfully fabricated, which exhibited both high strength and high ductility.

High intensity beam studies for the new MEBT1 design

Okabe, Kota; Liu, Y.*; Otani, Masashi*; Moriya, Katsuhiro; Shibata, Takanori*; Chimura, Motoki*; Hirano, Koichiro; Oguri, Hidetomo; Kinsho, Michikazu

JPS Conference Proceedings (Internet), 33, p.011011_1 - 011011_6, 2021/03

https://doi.org/10.7566/JPSCP.33.011011

To realize more stable operation of the J-PARC accelerators, we have a re-design plan of an MEBT1 (Medium Energy Beam Transport). At the J-PARC Linac, the MEBT1 has transverse and longitudinal beam matching section for the DTLs. However there are some locally activated spots in DTL area at the current beam power level. To reduce beam loss during a beam acceleration at the DTLs is a most important task for a stable user operation. The first thing we should do is investigation a connection between beam quality in the MEBT1 and parameters of the upstream hardware. In this presentation, we will report a high intensity beam study results at the MEBT1.

Numerical and experimental study of H beam dynamics in J-PARC LEBT

Shibata, Takanori*; Ikegami, Kiyoshi*; Liu, Y.*; Miura, Akihiko; Naito, Fujio*; Nammo, Kesao*; Oguri, Hidetomo; Okoshi, Kiyonori; Otani, Masashi*; Shinto, Katsuhiro; et al.

Proceedings of 29th International Linear Accelerator Conference (LINAC 2018) (Internet), p.519 - 521, 2019/01

https://doi.org/10.18429/JACoW-LINAC2018-TUPO079

Transport process of negative hydrogen ion (H) in LEBT (Low Energy Beam Transport) is investigated by comparison of experimental and numerical results. A three dimensional Particle-In-Cell (PIC) particle transport model has been developed in order to take into account (i) axial magnetic field by two solenoids in J-PARC LEBT and (ii) radial electric field by space charge (SC) effect. Ratio of H beam particles inside the RFQ (Radio Frequency Quadrupole) acceptance to the total particles at the RFQ entrance is calculated for different current conditions in LEBT solenoid 1 and 2. The results are compared with RFQ transmission rate measured in the J-PARC linac commissioning. The double peak of RFQ transmission rate to the solenoid applied current seen in the measurement is explained by the calculation results. The results indicate that presence of the LEBT orifice for differential pumping plays a role as a collimator to reduce emittance at RFQ entrance.

Nuclear moments of the low-lying isomeric state of Al; Investigation on the neutron excitation across in the island of inversion

Xu, Z. Y.*; Heylen, H.*; Asahi, Koichiro*; Boulay, F.*; Daugas, J. M.*; de Groote, R. P.*; Gins, W.*; Kamalou, O.*; Koszors, .*; Lykiardopoupou, M.*; et al.

Physics Letters B, 782, p.619 - 626, 2018/07

AA2018-0159.pdf:0.5MB

https://doi.org/10.1016/j.physletb.2018.06.009

no abstracts in English

Observation of a -decaying millisecond isomeric state in Cd

Jungclaus, A.*; Grawe, H.*; Nishimura, Shunji*; Doornenbal, P.*; Lorusso, G.*; Simpson, G. S.*; Sderstrm, P.-A.*; Sumikama, Toshiyuki*; Taprogge, J.*; Xu, Z. Y.*; et al.

Physics Letters B, 772, p.483 - 488, 2017/09

https://doi.org/10.1016/j.physletb.2017.07.006

LEBT commissioning of the J-PARC LINAC

Shibata, Takanori*; Ikegami, Kiyoshi*; Liu, Y.*; Maruta, Tomofumi*; Naito, Fujio*; Takagi, Akira*; Asano, Hiroyuki; Kondo, Yasuhiro; Miura, Akihiko; Oguri, Hidetomo; et al.

Proceedings of 28th International Linear Accelerator Conference (LINAC 2016) (Internet), p.251 - 253, 2017/05

https://doi.org/10.18429/JACoW-LINAC2016-MOPLR052

After upgrade of J-PARC Linac in 2014, Low Energy Beam Transport (LEBT) beam commissioning of the J-PARC LINAC has been made for improving H beam intensity extracted from Linac. Currents of two solenoid coils and steering magnets in LEBT are optimized with extraction and acceleration voltages for static acceleration in ion source (IS) which decides on an initial emittance diagram of H beam. As a result of LEBT and IS parameter optimization, beam transmission rate of RFQ has been reached up to 96% in 50 mA H current operation. Moreover, PIC-MC (Particle-In-Cell Monte-Carlo) simulation models developed for H transport in LEBT. Comparison between experimental and numerical results are presented to clarify beam physics from IS exit to RFQ entrance.

Corrosion test of HTGR graphite with SiC coating

Chikhray, Y.*; Kulsartov, T.*; Shestakov, V.*; Kenzhina, I.*; Askerbekov, S.*; Sumita, Junya; Ueta, Shohei; Shibata, Taiju; Sakaba, Nariaki; Abdullin, Kh.*; et al.

Proceedings of 8th International Topical Meeting on High Temperature Reactor Technology (HTR 2016) (CD-ROM), p.572 - 577, 2016/11

Application of SiC as corrosion-resistive coating over graphite remains important task for HTGR. This study presents the results of chemical interaction of the SiC gradient coating over the high-density IG-110 graphite with water vapor in the temperature up to 1673 K. The experiments at 100 Pa of water vapor showed that the passive reaction caused to form SiO film on the surface of SiC coating. Active corrosion of SiC in 1Pa of water vapor leads to deposits of various carbon composites on its surface.