Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakamoto, Hiroyuki*; Akagi, Yosuke*; Yamada, Kazuo*; Tachi, Yukio; Fukuda, Daisuke*; Ishimatsu, Koichi*; Matsuda, Mikiya*; Saito, Nozomi*; Uemura, Jitsuya*; Namihira, Takao*; et al.
Nihon Genshiryoku Gakkai Wabun Rombunshi, 17(2), p.57 - 66, 2018/05
Concrete debris contaminated with radioactive cesium and other nuclides have been generated from the accident in the Fukushima Dai-ichi Nuclear Power Plant and there will be generated due to the decommissioning of nuclear power plants in the future. Although conventional decontamination techniques are effective for flat concrete surfaces such as floors and walls, it is not clear what techniques to apply for decontaminating radioactive concrete debris. In this study, focusing on a pulsed power discharge technique, fundamental experimental works were carried out. Decontamination of concrete by applying the aggregate recycling technique using the pulsed power discharge technique was evaluated by measuring radioactivity of aggregate and sludge separated from the contaminated concrete. The results suggest that the separation into aggregate and sludge of the contaminated concrete debris could achieve decontamination and volume reduction of the radioactive concrete debris.
Arifi, E.*; Ishimatsu, Koichi*; Iizasa, Shinya*; Namihira, Takao*; Sakamoto, Hiroyuki*; Tachi, Yukio; Kato, Hiroyasu*; Shigeishi, Mitsuhiro*
Construction and Building Materials, 67(Part B), p.192 - 196, 2014/09
Times Cited Count：5 Percentile：25.91(Construction & Building Technology)The Fukushima Dai-ichi Nuclear Plant accident has resulted in a large amount of radioactively contaminated concrete. The possible application of the pulsed power discharge to reduce the amount of contaminated concrete as radioactive waste was investigated. The contaminated concrete was decontaminated by separating contaminated matrix from uncontaminated coarse aggregate under pulsed power discharge process. In this study, a stable Cs isotope was used to simulate radioactively contaminated concrete. As a result, while the volume of reclaimed aggregate from contaminated concrete could be reproduced was up to 60%, nevertheless Cs detected in the reclaimed aggregate was only approximately 3%. Thus most of the Cs were dissolved in water during the discharge process. It is expected that the pulsed power could reduce the contaminated concrete waste by reusing aggregate. Further investigations are requested to test the applicability of this method under the realistic conditions close to the actual waste.
Sakamoto, Hiroyuki*; Shimoda, Satoko*; Yamada, Kazuo*; Namihira, Takao*; Shigeishi, Mitsuhiro*; Tachi, Yukio
no journal, ,
The Fukushima Dai-ichi Nuclear Plant accident has resulted in a large amount of radioactively contaminated concrete. The possible application of the pulsed power discharge to reduce the amount of contaminated concrete debris as radioactive waste was investigated. This method could decontaminate and reduce the contaminated concrete wastes by separating contaminated matrix from uncontaminated coarse aggregate under pulsed power discharge process.
