Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
-dialkylamides using multistage mixer-settler extractorsBan, Yasutoshi; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka; Tsubata, Yasuhiro; Matsumura, Tatsuro
Procedia Chemistry, 21, p.156 - 161, 2016/12
Times Cited Count：5 Percentile：94.32(Chemistry, Inorganic & Nuclear)A continuous counter-current experiment was carried out to demonstrate the validity of a process using -dialkylamides for recovering U and Pu. This process consisted of two cycles, and the 1st cycle and the 2nd cycle employed -di(2-ethylhexyl)-2,2-dimethylpropanamide and -di(2-ethylhexyl)butanamide as extractants, respectively. The feed solution for the 1st cycle was 5.1 mol/dm
(M) nitric acid containing 0.92 M U, 1.6 mM Pu, and 0.6 mM Np. The raffinate collected in the 1st cycle was used as the feed for the 2nd cycle. The ratios of U recovered in the U fraction and U-Pu fraction were 99.1% and 0.8%, respectively. The ratio of Pu recovered in the U-Pu fraction was 99.7%. The concentration ratio of U with respect to Pu in the U-Pu fraction was 9, and this indicated that Pu was not isolated. The decontamination factor of U with respect to Pu in the U fraction was obtained as 4.5
10
. These results supported the validity of the proposed process.
Ban, Yasutoshi; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka; Matsumura, Tatsuro
Proceedings of 5th International Conference on Asian Nuclear Prospects 2016 (ANUP 2016) (CD-ROM), 2 Pages, 2016/10
A continuous counter-current experiment was conducted using mixer-settler extractors installed in a hot cell. -Di(2-ethylhexyl)-2,2-dimethylpropanamide (DEHDMPA) was used as the extractant for U. The experimental results showed that DEHDMPA can effectively extract U from nitric acid, and the recovery of U in the U fraction was obtained as 99.6%.
Suzuki, Asuka; Hotoku, Shinobu; Ban, Yasutoshi; Tsutsui, Nao; Tsubata, Yasuhiro; Matsumura, Tatsuro
Proceedings of 5th International Conference on Asian Nuclear Prospects 2016 (ANUP 2016) (CD-ROM), 2 Pages, 2016/10
The Japan Atomic Energy Agency (JAEA) conducts extensive research and development (R&D) activities toward the development of aqueous separation processes for spent nuclear fuel at the Nuclear Fuel Cycle Safety Engineering Research Facility-Back-end Fuel Cycle Key Element Research Facility (NUCEF-BECKY). BECKY is equipped with three hot cells, several glove boxes, and fume hoods. One of the hot cells, called the process cell, contains bench scale spent fuel test equipment used for U, Pu, and other spent fuel material. In this study, we describe an equipment used for aqueous separation processes in the process cell.
Nakashima, Hiroshi; Shibata, Tokushi; Nakane, Yoshihiro; Masukawa, Fumihiro; Matsuda, Norihiro; Iwamoto, Yosuke; Hirayama, Hideo*; Suzuki, Takenori*; Miura, Taichi*; Numajiri, Masaharu*; et al.
Proceedings of 14th Biennial Topical Meeting of the ANS Radiation Protection and Shielding Division (CD-ROM), p.267 - 282, 2006/00
no abstracts in English
Nakashima, Hiroshi; Nakane, Yoshihiro; Masukawa, Fumihiro; Matsuda, Norihiro; Oguri, Tomomi*; Nakano, Hideo*; Sasamoto, Nobuo*; Shibata, Tokushi*; Suzuki, Takenori*; Miura, Taichi*; et al.
Radiation Protection Dosimetry, 115(1-4), p.564 - 568, 2005/12
Times Cited Count：8 Percentile：49.16(Environmental Sciences)The High Intensity Proton Accelerator Project, named as J-PARC, is in progress, aiming at studies on the latest basic science and the advancing nuclear technology. In the project, the high-energy proton accelerator complex of the world highest intensity is under construction. In order to establish a reasonable shielding design, both simplified and detailed design methods were used in the shielding design of J-PARC. This paper reviews the present status of the radiation safety design study for J-PARC.
Nakashima, Hiroshi; Shibata, Tokushi; Sawahata, Kei; Miyamoto, Yukihiro; Nakane, Yoshihiro; Masukawa, Fumihiro; Seki, Kazunari; Sato, Koichi; Oguri, Tomomi*; Hirayama, Hideo*; et al.
no journal, ,
Aiming at studies on the latest basic science and the advancing nuclear technology, the J-PARC (Japan Proton Accelerator Research Complex) project is in progress, and the high-energy proton accelerator complex of the world highest intensity is under construction. Because of its very high beam power and its energy as well as the large-scale accelerator complex, we have encountered some difficult radiation problems in the radiation safety design. This paper reviews the radiation safety policy and methods for the design to overcome the problems on the radiation safety and the status of the radiation safety estimation for licensing of J-PARC.
Shibata, Tokushi; Nakashima, Hiroshi; Nakane, Yoshihiro; Masukawa, Fumihiro; Matsuda, Norihiro; Miura, Taichi*; Numajiri, Masaharu*; Suzuki, Takenori*; Takeuchi, Yasunori*
no journal, ,
J-PARC (Japan Proton Accelerator Research Complex) consists of a 400 MeV LINAC, a 3 GeV synchrotron, a 50 GeV synchrotron and three experimental halls for material and life science, hadron physics and neutrino physics. The radiation safety design for J-PARC is based on calculations on radiation outside the shielding, on the boundary of the controlled area and on the cite boundary. In order to study the accuracy of different methods and make clear the differences among different methods, some benchmark analyses on beam dump, bulk shielding, streaming and activation experiments were carried out. The activation of air, cooling water and the activation of soil and its effect to underground water have been also estimated. Since J-PARC is a complex accelerator facility, an interlock system is important for radiation safety. To prevent unintended radiation exposure, a carefully designed system was incorporated.
Matsumura, Tatsuro; Ban, Yasutoshi; Suzuki, Hideya; Tsubata, Yasuhiro; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka
no journal, ,
The new reprocessing and minor actinide (MA) separation processes using innovative extractants in accord with CHON principle has been developed in Japan Atomic Energy Agency aimed for reduction of radioactive wastes from nuclear fuel cycle. The new nonorganophosphorus extractants which have appropriate extraction behaviors for each separation steps were developed. Continuous counter-current experiment of each solvent extraction process with uranium, plutonium and tracers of minor actinides were carried out. The experimental results showed that the separation performance of the solvent extraction processes were demonstrated successfully.
Matsumura, Tatsuro; Ban, Yasutoshi; Suzuki, Hideya; Tsubata, Yasuhiro; Toigawa, Tomohiro; Tsutsui, Nao; Hotoku, Shinobu; Suzuki, Asuka
no journal, ,
no abstracts in English
Matsumura, Tatsuro; Ban, Yasutoshi; Suzuki, Hideya; Tsubata, Yasuhiro; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka; Toigawa, Tomohiro; Kurosawa, Tatsuya*; Shibata, Mitsunobu*; et al.
no journal, ,
To continue the utilization of the nuclear fission energy, the management of the high-level radioactive waste is one of the most important issues to be solved. Partitioning and Transmutation technology is expected to be effective to mitigate the burden of the HLW disposal by reducing the radiological toxicity and heat generation. JAEA has been conducting R&D on the MA separation process to remove of MA from HLW and supply the recovered MA to the transmutation system such as ADS. The MA separation process contains three steps. For An(III)+RE recovery process, we developed TDdDGA which has very high performance to recover of MA from high level waste. HONTA and ADAAM were developed for An(III)/RE separation process and Am/Cm separation process respectively. All extractants satisfy CHON principle to minimization of the secondary waste from the process. The separation performances of the flowsheets were evaluated by continuous extraction tests using simulated and genuine high level liquid waste.
Matsumura, Tatsuro; Ban, Yasutoshi; Suzuki, Hideya; Tsubata, Yasuhiro; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka; Toigawa, Tomohiro; Kurosawa, Tatsuya*; Shibata, Mitsunobu*; et al.
no journal, ,
PUREX process was established for industrial scale reprocessing plant. TRUEX and the 4 group separation were developed for partitioning of minor actinides from HLW, and demonstrated using genuine HLW. Although the extractants for the processes have excellent performance, the molecules contain phosphorus which could be cause for the secondary waste from the solvent extraction processes. To minimize the radioactive waste, we have conducted research and development of the new reprocessing and MA separation processes using innovative extractants in accord with CHON principle. The extractants for reprocessing process are monoamides as alternative extractants for TBP. For An(III)+RE recovery process, we developed TDdDGA. HONTA and ADAAM were developed for An(III)/RE separation process and Am/Cm separation process respectively. The separation performances of the flowsheets were evaluated by continuous extraction tests using simulated and genuine spent fuel and high level liquid waste.
Matsumura, Tatsuro; Ban, Yasutoshi; Hotoku, Shinobu; Suzuki, Hideya; Tsubata, Yasuhiro; Tsutsui, Nao; Suzuki, Asuka
no journal, ,
Matsumura, Tatsuro; Ban, Yasutoshi; Suzuki, Hideya; Tsubata, Yasuhiro; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka; Toigawa, Tomohiro; Kurosawa, Tatsuya*; Shibata, Mitsunobu*; et al.
no journal, ,
PUREX process was established for industrial scale reprocessing plant. TRUEX and the 4 group separation were developed for partitioning of minor actinides from high level liquid waste from reprocessing process, and demonstrated by the continuous extraction test using genuine high level liquid waste. Although the extractants for reprocessing and MA separation processes, such as tri-n-butyl phosphate (TBP), n-octyl(phenyl)-N, N-diisobutylcarbamoylmethylphosphine oxide (CMPO) and diisodecylphosphoric acid (DIDPA), have excellent performance for recovery of U, Pu or MA, the molecules contain phosphorus which could be cause for the secondary waste from the solvent extraction processes. To minimize the radioactive waste from nuclear fuel cycle, we have conducted research and development of the new reprocessing and MA separation processes using innovative extractants in accord with CHON principle.
Ban, Yasutoshi; Hotoku, Shinobu; Tsutsui, Nao; Suzuki, Asuka; Tsubata, Yasuhiro; Matsumura, Tatsuro
no journal, ,
no abstracts in English
