Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
filament arc-driven multi-cusp ion source for iBNCTShibata, Takanori*; Takagi, Akira*; Ikegami, Kiyoshi*; Sugimura, Takashi*; Nammo, Kesao*; Naito, Fujio*; Kobayashi, Hitoshi*; Kurihara, Toshikazu*; Honda, Yosuke*; Sato, Masaharu*; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.385 - 387, 2018/10
Naito, Fujio*; Anami, Shozo*; Ikegami, Kiyoshi*; Uota, Masahiko*; Ouchi, Toshikatsu*; Onishi, Takahiro*; Oba, Toshiyuki*; Obina, Takashi*; Kawamura, Masato*; Kumada, Hiroaki*; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1244 - 1246, 2016/11
The proton linac installed in the Ibaraki Neutron Medical Research Center is used for production of the intense neutron flux for the Boron Neutron Capture Therapy (BNCT). The linac consists of the 3-MeV RFQ and the 8-MeV DTL. Design average beam current is 10mA. Target is made of Beryllium. First neutron production from the Beryllium target was observed at the end of 2015 with the low intensity beam as a demonstration. After the observation of neutron production, a lot of improvement s was carried out in order to increase the proton beam intensity for the real beam commissioning. The beam commissioning has been started on May 2016. The status of the commissioning is summarized in this report.
Harigae, Hitoshi; Takagi, Tsuyohiko; Hamano, Tomoharu; Nakamura, Shoichi; Oba, Toshio; Ebashi, Masaaki; Okuda, Eiichi; Kinoshita, Tomonobu
JAEA-Technology 2013-014, 150 Pages, 2013/07
JAEA-Technology-2013-014.pdf:24.38MB
In-Vessel Transfer Machine (IVTM) came off from the gripper claw in the Auxiliary Handling Machine (AHM) and fell at a height of approximately two meters during a withdrawal work of the IVTM in the Fast Breeder Reactor (FBR) Monju. The withdrawal work of IVTM from the reactor vessel by AHM was performed. The work, however, was suspended due to the excessive load alarm. To grasp the situation of the IVTM fall, observation of the machine was necessary. An interior observation and an exterior observation of the dropped IVTM were performed. As a result of these observations, the radially deformed lower end of the upper guide tube was observed at the connection part, and it was jammed in the fuel throat sleeve when the dropped IVTM was withdrawn. Based on this information, the IVTM could be safely withdrawn from the reactor vessel with the fuel throat sleeve.
Sugimoto, Masahiro*; Kosugi, Keizo*; Katayama, Kota*; Ii, Hideki*; Takagi, Akira*; Endo, Sakaru*; Shimizu, Hitoshi*; Tsubouchi, Hirokazu*; Kizu, Kaname; Yoshida, Kiyoshi
Proceedings of 24th International Cryogenic Engineering Conference (ICEC 24) and International Cryogenic Materials Conference 2012 (ICMC 2012) (CD-ROM), p.799 - 802, 2012/05
We have successfully manufactured all superconducting cables for CS and EF coils of JT-60SA. The low temperature performance of superconducting wires satisfied the specifications under sufficiently low deviations and high production yields. Ni-plated strands of EF cables having the larger sliding friction between strands than that of Cr-plated strands of CS cable caused difficulties on the cabling without any defects. Consequently, the newly developed cabling techniques with the original inspection apparatus significantly enhanced the manufacturability and were effective for guarantee of the quality.
Kobayashi, Yasuhiko; Funayama, Tomoo; Hamada, Nobuyuki*; Sakashita, Tetsuya; Konishi, Teruaki*; Imaseki, Hitoshi*; Yasuda, Keisuke*; Hatashita, Masanori*; Takagi, Keiichi*; Hatori, Satoshi*; et al.
Journal of Radiation Research, 50(Suppl.A), p.A29 - A47, 2009/03
Times Cited Count：38 Percentile：72.75(Biology)Yoshikawa, Hiroshi; Sakaki, Hironao; Sako, Hiroyuki; Takahashi, Hiroki; Shen, G.; Kato, Yuko; Ito, Yuichi; Ikeda, Hiroshi*; Ishiyama, Tatsuya*; Tsuchiya, Hitoshi*; et al.
Proceedings of International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS '07) (CD-ROM), p.62 - 64, 2007/10
J-PARC is a large scale facility of the proton accelerators for the multi-purpose of scientific researches in Japan. This facility consists of three accelerators and three experimental stations. Now, J-PARC is under construction, and LINAC is operated for one year, 3GeV synchrotron has just started the commissioning in this October the 1st. The completion of this facility will be next summer. The control system of accelerators established fundamental performance for the initial commissioning. The most important requirement to the control system of this facility is to minimize the activation of accelerator devices. In this paper, we show that the performances of each layer of this control system have been achieved in the initial stage.
4P
Kawana, Daichi*; Kuwahara, Keitaro*; Sato, Masashi*; Takagi, Masatoshi*; Aoki, Yuji*; Kogi, Masafumi*; Sato, Hideyuki*; Sagayama, Hajime*; Osakabe, Toyotaka; Iwasa, Kazuaki*; et al.
Journal of the Physical Society of Japan, 75(11), p.113602_1 - 113602_4, 2006/11
Times Cited Count：11 Percentile：56.33(Physics, Multidisciplinary)We report the first X-ray diffraction experiments of PrFeP under high pressure. We discovered a symmetry lowering from cubic to orthorhombic or lower at the metal-insulator transition temperature, accompanied by a jump in the lattice constant, which indicates a first-order phase transition. The superlattice reflections at q=(1,0,0) observed in the low-pressure nonmagnetic ordered phase are found to disappear in the insulating phase. The temperature dependence of the lattice constant and the absence of the superlattice reflections are well explained by taking into account an antiferromagnetic ordering.
Nakano, Takashi*; Arakawa, Kazuo; Sakurai, Hideyuki*; Hasegawa, Masatoshi*; Yuasa, Kazuhisa*; Saito, Etsuko*; Takagi, Hitoshi*; Nagamine, Takeaki*; Kusakabe, Takahiko*; Takada, Hisashi*; et al.
International Journal of PIXE, 16(1&2), p.69 - 76, 2006/00
A new program was started out to create a new medical scientific field, which is consisting of radiation oncology and nuclear medicine, utilizing the advanced accelerator and ion beam technology. An in-air micro-PIXE analyzer system, which is among the most important technical basis of the program, was upgraded to improve accuracy of elemental mapping for samples having thickness variation in a scope of microbeam scanning. In the program, on the other hand, in order to approach important bio-medical problems on cancer, intracellular dynamics of the trace elements according to mechanism of development of diseases were studied using this system. This paper outlines this program and shows the system upgraded, and results of preliminary studied about the problems.
Furusawa, Yoshiya*; Wang, X.*; Funayama, Tomoo; Kobayashi, Katsumi*; Imaseki, Hitoshi*; Takagi, Keiichi*; Nakamura, Masanobu*; Kashino, Genro*
no journal, ,
no abstracts in English
Takizawa, Daichi*; Takagi, Hitoshi*; Makita, Chikako*; Nakajima, Yuka*; Saito, Etsuko*; Oyama, Tatsuya*; Ichikawa, Takeshi*; Kakizaki, Akira*; Sato, Ken*; Mori, Masatomo*; et al.
no journal, ,
no abstracts in English
