Dynamical response of transition-edge sensor microcalorimeters to a pulsed charged-particle beam

Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I.-H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.

IEEE Transactions on Applied Superconductivity, 31(5), p.2101704_1 - 2101704_4, 2021/08

https://doi.org/10.1109/TASC.2021.3067793

A superconducting transition-edge sensor (TES) microcalorimeter is an ideal X-ray detector for experiments at accelerator facilities because of good energy resolution and high efficiency. To study the performance of the TES detector with a high-intensity pulsed charged-particle beam, we measured X-ray spectra with a pulsed muon beam at the Japan Proton Accelerator Research Complex (J-PARC) in Japan. We found substantial temporal shifts of the X-ray energy correlated with the arrival time of the pulsed muon beam, which was reasonably explained by pulse pileup due to the incidence of energetic particles from the initial pulsed beam.

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

Calculations for ambient dose equivalent rates in nine forests in eastern Japan from Cs and Cs radioactivity measurements

Malins, A.; Imamura, Naohiro*; Niizato, Tadafumi; Takahashi, Junko*; Kim, M.; Sakuma, Kazuyuki; Shinomiya, Yoshiki*; Miura, Satoru*; Machida, Masahiko

Journal of Environmental Radioactivity, 226, p.106456_1 - 106456_12, 2021/01

https://doi.org/10.1016/j.jenvrad.2020.106456

Utilizing nuclear data in delayed gamma-ray spectroscopy inverse Monte Carlo analysis

Rodriguez, D.; Abbas, K.*; Crochemore, J.-M.*; Koizumi, Mitsuo; Nonneman, S.*; Pedersen, B.*; Rossi, F.; Seya, Michio*; Takahashi, Tone

EPJ Web of Conferences, 239, p.17005_1 - 17005_5, 2020/09

https://doi.org/10.1051/epjconf/202023917005

Nonreciprocal surface acoustic wave propagation via magneto-rotation coupling

Xu, M.*; Yamamoto, Kei; Puebla, J.*; Baumgaertl, K.*; Rana, B.*; Miura, Katsuya*; Takahashi, Hiromasa*; Grundler, D.*; Maekawa, Sadamichi*; Otani, Yoshichika*

Science Advances (Internet), 6(32), p.eabb1724_1 - eabb1724_4, 2020/08

https://doi.org/10.1126/sciadv.abb1724

Development of delayed gamma-ray spectroscopy for nuclear material analysis

Rodriguez, D.; Rossi, F.; Takahashi, Tone; Seya, Michio; Koizumi, Mitsuo; Crochemore, J. M.*; Varasano, G.*; Bogucarska, T.*; Abbas, K.*; Pedersen, B.*

Proceedings of INMM 59th Annual Meeting (Internet), 7 Pages, 2018/07

Electrochemical impedance analysis on solid electrolyte oxygen sensor with gas and liquid reference electrodes for liquid LBE

Adhi, P. M.*; Okubo, Nariaki; Komatsu, Atsushi; Kondo, Masatoshi*; Takahashi, Minoru*

Energy Procedia, 131, p.420 - 427, 2017/12

https://doi.org/10.1016/j.egypro.2017.09.472

The ionic conductivity of solid electrolyte may insufficient, and the sensor output signal will deviate from the theoretical one in low temperature. The performance of oxygen sensor with Ag/air reference electrode (RE) and liquid Bi/BiO RE was tested in low-temperature LBE at 300450C and the charge transfer reactions impedance at the electrode-electrolyte interface was analyzed by electrochemical impedance analysis (EIS). After steady state condition, both of the sensors performed well and can be used at 300450C. Bi/Bi/BiO RE has lower impedance than Ag/air RE. Therefore, the response time of the oxygen sensor with Bi/Bi/BiO RE is faster than the oxygen sensor with Ag/air RE in the low-temperature region.

Theory of spin Hall magnetoresistance (SMR) and related phenomena

Chen, Y.-T.*; Takahashi, Saburo*; Nakayama, Hiroyasu*; Althammer, M.*; Goennenwein, S. T. B.*; Saito, Eiji; Bauer, G. E. W.*

Journal of Physics; Condensed Matter, 28(10), p.103004_1 - 103004_15, 2016/03

https://doi.org/10.1088/0953-8984/28/10/103004

We review the so-called spin Hall magnetoresistance (SMR) in bilayers of a magnetic insulator and a metal, in which spin currents are generated in the normal metal by the spin Hall effect. The associated angular momentum transfer to the ferromagnetic layer and thereby the electrical resistance is modulated by the angle between the applied current and the magnetization direction. The SMR provides a convenient tool to non-invasively measure the magnetization direction and spin-transfer torque to an insulator. We introduce the minimal theoretical instruments to calculate the SMR, i.e. spin diffusion theory and quantum mechanical boundary conditions. This leads to a small set of parameters that can be fitted to experiments. We discuss the limitations of the theory as well as alternative mechanisms such as the ferromagnetic proximity effect and Rashba spin-orbit torques, and point out new developments.

Measurement of ion species in high current ECR H/D ion source for IFMIF (International Fusion Materials Irradiation Facility)

Shinto, Katsuhiro; Sene, F.*; Ayala, J.-M.*; Bolzon, B.*; Chauvin, N.*; Gobin, R.*; Ichimiya, Ryo; Ihara, Akira; Ikeda, Yukiharu; Kasugai, Atsushi; et al.

Review of Scientific Instruments, 87(2), p.02A727_1 - 02A727_3, 2016/02

https://doi.org/10.1063/1.4933342

Present status of the injector for IFMIF Linear Prototype Accelerator (LIPAc)

Shinto, Katsuhiro; Ichikawa, Masahiro; Takahashi, Hiroki; Kondo, Keitaro; Kasugai, Atsushi; Gobin, R.*; Sene, F.*; Chauvin, N.*; Ayala, J.-M.*; Marqueta, A.*; et al.

Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.493 - 495, 2015/09

http://www.pasj.jp/web_publish/pasj2015/proceedings/PDF/WEP0/WEP032.pdf

Development of the prototype accelerator (LIPAc) for the engineering validation of the International Fusion Materials Irradiation Facility (IFMIF) which is an accelerator driven neutron source has been progressed at Rokkasho. The LIPAc is a deuteron linear accelerator consisting of an injector, a radio-frequency quadrupole (RFQ) linac and a superconducting linac. The objective of LIPAc is to produce a CW beam with the energy and current of 9 MeV and 125 mA, respectively. The injector was developed at CEA/Saclay and succeeded to produce CW proton and deuteron beams of 100 keV/140 mA by autumn 2012. After the test at CEA/Saclay, the injector was shipped to the International Fusion Energy Research Centre (IFERC) in Rokkasho, Aomori and started to reassemble from the end of 2013. It was successfully produced proton beams in November 2014 at Rokkasho. While the ion source conditioning was done, the beam test was progressed. In this paper, the present status of the LIPAc injector at Rokkasho with some experimental results will be presented.